Hinge for any mini with external hinges and uses gaskets BMP135 on A panel and and ALA7844 on door. Supplied with new studs/nuts and washers for fitment but if you need spares see 14A6818BOLT new set of bolts an...
These special hoses are for all sliding window type doors to drain the water away from the channels. The thin end of the hose slides into the bottom tube to ensure water goes out and cannot leak into the bottom of the door and the top slides over the...
Torpedo mirror for door mounting only. Not wing mounted.
What's new about a bullet mirror, you ask? This one is made just for the Mini and Sprites/Midgets. Designed by Keith Dodd and manufactured by TEX the stem is a little longer and the b...
Correct size self tapper screw for 24A88 lower sliding window channel when door holes have not rusted out to larger size.
If you want your door and bootlid to have new or matching keys this is the easy way. The standard set includes two barrels with matching keys. This is only suitable when you require a drivers door and boot handle to match on MK1/2 cars only. This fit...
One of the distinguishing features of the Cooper S model was the chrome trim around the door windows. If yours is missing or mangled, it can now be replaced
(we won't ask for your car's pedigree if you're adding it to a non S door)!
White plastic/nylon buffer on door of all UK external hinge minis.
The door striker plate 14A6832 holds the door shut, but the nylon guide block actually supports the weight when the door is closed. When one wears it typically...
The Mini with external door hinges have a unique door panel. The inside door pockets have a tendency to collect water and thus rust from the inside out. Now, thanks to Heritage we have a very high quality replacement outer door panel. These are mad...
Perhaps one of the most endearing features of the early Minis with sliding windows are the external door hinges, that is until they are worn beyond repair and sag to the point that the door won't close. Replacements are available individually, but th...
Hinge for any mini with external hinges and uses gaskets BMP135 on A panel and and ALA7844 on door. Supplied with new studs/nuts and washers for fitment but if you need spares see 14A6818BOLT. A hinge and bolt a...
The plate fits into the white 14A6833 door buffer to protect it from screw damage. Now made in stainless steel it is countersunk one side to take the screws.
The original bracket that the screws fixed to is no longer available a...
Plastic window locks for sliding windows, metal ones are no longer available.
24A1194 = Right Front
24A1195 = Left Front
24A1196 = Right Rear
24A1197 = Left Rear
If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...
Genuine Mini Spares product-These are copies of the original solid type, with stronger reinforced internal wire and with the holes for drainage and securing.
These fit either side door where the holes line up on the window catch moulding. C...
If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...
If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...
The rear doors of the Mini Van and Wagon are the same except on the Woodie were a wood frame is screwed to the sheet metal. The door has a inner and outer skin and should have drain holes in the bottom. When these plug up the resulting rust always ...
Bullet Mirror for wing mounting only,quality manufactured in UK
Almost too many choices but this classic looking mirror will dress-up your car no matter which version you choose. The original version is straight glass in a chrome housing (G...
These Mirrors are made in the U.K. by Tex. Slightly convex lens gives excellent rearward visibility. Right side, left is GAM218A. For fitment to laters cars originally fitted with plastic mirrors, use fitting kit M90999.
See als...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.