This is the horizontal panel under the rear seat area that has the location points and castellated nuts for the front of the rear subframe fixings which often rusts. Fits all saloons and Clubmans but for Clubman estates and vans with wooden load floo...

latest rear valances have holes drilled for left and right hand drive rear fog lamps so these are the plugs to fill the holes of the side you do not have the lamp

Genuine metal battery box. always going rusty owing to the location of where they are fitted. Requires welding in place and preferably painted or protective coat of some kind and remember to check if the battery cover, strap and clips need changing...

this panel closes off the front of the L/H rear wheel arch

The rear centre valance section for all vans, pick ups and estates. The corner

pieces of this valance are available separately as 14A6908/9

This boot and seat pan section does not have the battery box fitted. See HMP441016 if you want it complete-It will fit all models is the latest pressing which includes piercings as used on injection models.



see 14A6672...

This is the complete R/H wheel arch but you can purchase the top part only as 14A6617 for R/H or 14A6618 for the L/H

Also available is the shock absorber turret part separately, HMP441010 RH and [link]...

This is the R/H vertical part panel only that has the shock absorber mounting turrett. See 14A9558/9 for complete panel

R/H rear lower genuine corner section of the rear valance on vans.estates.travellers and pick ups

this non genuine panel has all the fitting holes and metric M6 castellated nuts for the rear fog lamps which were fitted as standard from 1983 on. The M6 bolts required are 10mm long and DYP10002 can be used. The wiring grommet for this ...