On /Off safety swith guard and press starter switch, plus two switches. se MSA344-3 for 3 switch or MSA336/7 for warning light types
Complete assembly includes 2 shear bolts, lock, ignition switch & barrel assembly and even a spare key. Wiring loom has a four-pin plug. Fitted from MK4 mini (1976 to 1996) up to the introduction of MPI which had air bags fitted and different steerin...
This turn signal indicator switch also includes a black button on end for the horn push and a for and aft movement for the activation of high beams. The switch is used on most MK3 Minis and can be distinguished by the use of a plug for interconnectio...
These fit twin point only as they have a loom safety socket fitting.
Economy battery cut-off switch.
Most race sanctioning bodies require the use of a kill switch for easy and complete cut-off of power from the battery. The switch has to be accessible from inside and outside the car; the external trigger...
LIGHT SWITCH MK3 ILLUMIN, currently in short supply use YUF101030
Relay for horn, front spotlamps, fogs, starter indicators, alarm, cooling fan, burlar alarm and oxygen sensor - The relays for the electrics appeared from about 1990 on and all single point injection cars and SOME are colour coded for ease-40 amp wit...
Rocker light switch with blade connectors on the back. FITS MK3.
The mini switch with the little green flasher on the end, it was fitted to the MK1 only. The green lens is 47H5200.
HAZARD WARNING SWITCH, PIN TYPE CONNECTORS. MK4 FROM 1976. 3.1cm tall.
Black relay for the air con fitted mainly on export models 94-96 and some GB cars with carb before injection, 4 spade terminals and markings are Siemens V23134-B1052-C842 12v for 12 volt and R61-10
Rectangular switch for the rear heated screen with pin connectors plus a spade type. 3.1cm tall, from 1976 on.
RELAY FOR STARTER, sometimes green, mainly black ...The relays for the electrics appeared from about 1985 and on all injection cars and are colour coded for ease - number YWB000430 stamped on part is different from part number.
30 amp 5 spad...
Twin point injection cars had the luxury of a twin speed motor and this is the on off switch and any of you clever enough to convert your heaters will require this. The single speed switch is YUF101090.
Single speed heater switch for MK3 cars from1970 to 1996 only, as Rover changed to a twin speed heater fan with a new switch YUF101410.
This is the only part available for the heater control panel now..
Quantity requir...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.