Universal battery clamp replacement with securing bolts and marked P.
Throttle cable for those of you who have fitted metro carbs and linkage.
first used in 1990 but can be used on earlier cables and it shows HOT and COLD
displayed by red and blue arrow heads
Choke cable up to 1987. Pull & twist to lock..
The grommet in the body for this cable to pass through is CAM5969.
Speedo cable for most Innocenti made minis which had Veglia speedo clocks.
26"
Standard Mini throttle cable, fitment from 1959 through to 1990 and all HS carbed minis. Not suitable for cars with HIF38, HIF44, SPI and Twin point.
100% silcone translucent outer sheath, 8mm lead set with stainless steel wire spiral bound wire giving instant and greater resonance, Kevlar fibre core and a ferromagnetic layer for EMC suppression by Luminition. Top end of ignition lead sets.
Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...
100% silicon insulation, silicon coated suppressed conductor,braided glass reinforcement,increased working temperature 0f minus 50C to +300 degrees with improved resistance to damp and water, great fitting and spiral bound wire giving instant and gre...
Hanbrake cable for hydrolastic cars which used 2 of these and are different from dry suspension cars . SEE GVC2022 for dry pre 1976.
Authentic original type as fitted to the twin carb version Coopers and "S", with CHOKE AND LOCK written on it in recessed white paint.
There is a budget copy available which uses a different material and shape on the knob and script is not ...
48" extra long speedo cable for special fitmentswhen using original type Smiths central mounted speedo.
Extra long cable for Smiths central located speedo when position moved in dash and also used as a Tacho cable for Sprite, 36" long.
For mk1/2/3 Van,Pickup,Estate upto 1976 which had 2 cables from the lever.
FOR SALOON MODELS USE GVC2022
Fitted from approx 1969 to 1988 they replaced the original knob with the word PUSH and HEATER. This was done as a safety feature by having a rubber edge. The grommet in the body for this cable to pass through is CAM5969. Cable length is ...
Longest cable we keep for fitting a Smiths central type speedo when engine in rear of kit car. This is the correct cable for a Sprite or Midget, not a universal cable. Includes inner cable and outer sheath.
Bonnet locking cable fitted as standard on all Twin point injection minis plus other models from 1992/3. This cable is in our kit GS130273 to fit all minis as an accessory.
From 1976 the handbrake cable layout was changed, instead of two cables from the handbrake it was changed to one. Front for the saloons is 25" long and the van requires 29.5" long which is available as FAM625. The cable between the wheel...
Mini Moke Speedo Cable for the Centre clock type speedo,also 13" longer to allow the Smiths type central speedo to be moved.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.