FUEL GAUGE IN MAGNOLIA BF6108-04

13H2133MG

($45.36) £45.36 exc vat

($54.43) £54.43 inc vat

In stock

In 1964 the fuel gauge system was changed on the Mini (pre"64 cars did not have a voltage stabilizer). It is necessary to match the gauge with the tank sending unit and the supply voltage…if your readings are way off…always full or empty or max 1/2 f...

($45.36) £45.36 exc vat

($54.43) £54.43 inc vat

In stock

Recommended usage 1 x 13H2133MG to fit one mini.

Speedos, Gauges, & Cables - Qty 1

People also bought products

FIBRE WASHER FOR OIL GAUGE

2K4936B

Sealing washer for the oil gauge to oil pipe as sold in OL kit and for 21A804 metal pipe to oil gauge.

($0.20) £0.20 exc vat

($0.24) £0.24 inc vat

BRAIDED OIL GAUGE PIPE 48" LONG

C-AHT9

With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...

($39.09) £39.09 exc vat

($46.91) £46.91 inc vat

WIRING LOOM MINI MK4 CENTRE SPEEDO (OVAL DASH)

AN124

We sell about 20 of these per year and many are used on similar models to those indicated-Main and dash loom only--No side wing indicators-indicator stalk on right-alternator-rear lamps with reverse lights-steering lock-inertia starter-centre speedo ...

($182.07) £182.07 exc vat

($218.48) £218.48 inc vat

ADAPTOR ANGLED FOR OIL GAUGE PIPE

OAA

Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.

($10.43) £10.43 exc vat

($12.52) £12.52 inc vat

OIL PRESSURE GAUGE NYLON PIPE 5 FOOT LONG

Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.

Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.

($10.43) £10.43 exc vat

($12.52) £12.52 inc vat

ADAPTOR FOR PRESSURE OIL GAUGE PIPE

Oil gauge adaptor for fitting into engine block or T piece.

($7.43) £7.43 exc vat

($8.92) £8.92 inc vat

OIL GAUGE T PIECE

A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.

($9.52) £9.52 exc vat

($11.42) £11.42 inc vat

SPEEDO CABLE 39" THREADED BOTH ENDS

0722-39

Mini Moke Speedo Cable for the Centre clock type speedo,also 13" longer to allow the Smiths type central speedo to be moved.

($10.73) £10.73 exc vat

($12.88) £12.88 inc vat

HEX SCREW FOR VAN TANK PETROL SENDER UNIT

53K165

If you have an early Mini saloon or Estate/Van or Pickup with the fuel tank sending unit held in by screws, this is the correct screw for you.

Do not forget the special copper washers also 2A2088 and the cork gasket [link]2H10...

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat

OIL PRESSURE GAUGE MAGNOLIA FACE

13H4459MG

Oil pressure is the "blood pressure" of your engine! Know how it is doing and you know how your engine is doing. This Smith's gauge is the standard 2" diameter with chrome bezel. With a magnolia face. Mechanical.

Does not come with pipewor...

($68.04) £68.04 exc vat

($81.65) £81.65 inc vat

FUEL GAUGE (BF6108-00) 1964-83

13H2133

In 1964 the fuel gauge system was changed on the Mini (pre" 64 cars did not have a voltage stabilizer). It is necessary to match the gauge with the tank sending unit and the supply voltage…if your readings are way off…always full or empty or max 1/2 ...

($45.36) £45.36 exc vat

($54.43) £54.43 inc vat

SPEEDO CABLE 36" THREADED BOTH ENDS.

0722-36

Extra long cable for Smiths central located speedo when position moved in dash and also used as a Tacho cable for Sprite, 36" long.

($10.73) £10.73 exc vat

($12.88) £12.88 inc vat

SPEEDO CABLE 48" THREADED BOTH ENDS

0722-48

48" extra long speedo cable for special fitmentswhen using original type Smiths central mounted speedo.

($14.50) £14.50 exc vat

($17.40) £17.40 inc vat

WATER TEMPERATURE GAUGE MAGNOLIA FACE

13H4460MG

Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. With a magnolia face.

Does not come with bulb holder or bulb.

($45.63) £45.63 exc vat

($54.76) £54.76 inc vat

VOLTAGE STABILIZER (Centre Speedo) NEGATIVE EARTH ...

C34770A

This is the oblong metal box attached to the rear of your round centre speed heads to stabilize voltage to the fuel gauge. For Centre clock Speedo only!

made for negative earth only--BR1310

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat

COOPER S 200KMH SPEEDO IN MAGNOLIA

13H4444MG

Magnolia face. The 200 kilometres per hour Mini Cooper S speedometer is great for those who live in Metric countries or those in the U.S. who want to scare off their friends! Includes fuel gauge, voltage stabilizer and indicator lamps.

($255.78) £255.78 exc vat

($306.94) £306.94 inc vat

PLASTIC CENTRAL SPEEDO FASCIA

24A2702

The black plastic pod which mounts the speedo and two gauges in the original central position. In the 1970's and 1980's a great number of Mini owners caught the customizing bug and a lot of Minis had custom dashboards installed. Now we're going the o...

($39.00) £39.00 exc vat

($46.80) £46.80 inc vat

BULB SCREW FIT FOR DASH LIGHTS CENTRAL SPEEDO TYPE

GLB987

Screw type bulbs that fit the plugs (AEU1313A) on the round central clock speedos on all minis from 1959 until the introduction of the non Smiths type plastic clocks as used on the first clubmans and 1275GT. Sold individually.

($0.38) £0.38 exc vat

($0.46) £0.46 inc vat

PANEL WITH TWIN GAUGE HOLES IN BLACK