DOOR STRIKER PLATE ON BODY MK1/2.
14A6832

($7.98) £7.98 exc vat

($9.58) £9.58 inc vat

In stockIn stock
The door striker plate on the B post holds the door shut, but the nylon guide block 14A6833 actually supports the weight when the door is closed. When one wears it typically takes the other with it, so replace both. Don't forget to order the special easy to guide screws GD910161 with a pointed end.

($7.98) £7.98 exc vat

($9.58) £9.58 inc vat

In stockIn stock

Recommended usage 2 x 14A6832 to fit one mini.
Front Door - Sliding window type - Qty 2

Recommended products

Screw to hold 14A6832 MK1/2 Striker plate.

Special 3/16" screw with a pointed end which helps locating when fitting, this has only 1/4" thread, a very short screw with countersunk head.

Kit products
People also bought products

The felt gasket that sits between the door lock and door on external hinge doors. Material could be either black or white

MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.

Full Mk1 door handle set with 2 front door locking handles and boot handle with matching keys.

For wind up window type doors this is the mini saloon and clubman estate r/h

door lock mechanism mounted on the door.

For wind up window type doors this is the mini saloon and clubman estate l/h

door lock mechanism mounted on the door.

A complete set of 2 front door and one boot handle in chrome all with the same key numbers for wind up window door minis 1970on (keys included).

Door Handle Gasket's should also be replaced at same time, CZH1729 and [link]ALA579...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

Seal for door handles MK1/2 and all sliding window exterior hinge cars.

also used on 14A7195 mk1 boot handlle used on mk1/mk2 and van/estate



is oval shaped



for boot / rear door use the hole at the rear ...

clip that sits on the activating lever on the bottom of the MK3 door handle itself.

New door handles CZH886 and CZH887 have this clip on already.

On sliding window type MK1/2 doors the door locks are held on by these 3 screws.

3/16"unf countersunk head 1" long.

Clip to connect the door opening remote control rod plus the lock control mechanism fits on CZH640/1 and CZH616/7-- 2 per door. Also fits the wastegate on turbo models.

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...