DOOR HANDLE KIT INC BOOT HANDLE FOR PRE 1966 MK1

Full Mk1 door handle set with 2 front door locking handles and boot handle with matching keys.

($97.50) £97.50 exc vat

($117.00) £117.00 inc vat

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

($26.18) £26.18 exc vat

($31.42) £31.42 inc vat

LOCK R/H DOOR LHD WITH CATCH FOR MK1/2

24A2143

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

($26.18) £26.18 exc vat

($31.42) £31.42 inc vat

LOCK L/H DOOR LHD NO SAFETY CATCH

24A2146

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

($22.50) £22.50 exc vat

($27.00) £27.00 inc vat

LOCK R/H DOOR RHD NO SAFETY CATCH

24A2145

If your MKI or MKII suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. A left hand drive car should have a locking latch on the right side (the driver's side key-locks with the handle). Right...

($22.50) £22.50 exc vat

($27.00) £27.00 inc vat

DOOR HANDLE ESCUTCHEON SEAL MK1/2 AND VANS

ADA3817

Seal for door handles MK1/2 and all sliding window exterior hinge cars.

also used on 14A7195 mk1 boot handlle used on mk1/mk2 and van/estate

is oval shaped

for boot / rear door use the hole at the rear ...

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat

DOOR STRIKER PLATE ON BODY MK1/2.

14A6832

The door striker plate on the B post holds the door shut, but the nylon guide block 14A6833 actually supports the weight when the door is closed. When one wears it typically takes the other with it, so replace both. Don't forget to order...

($7.98) £7.98 exc vat

($9.58) £9.58 inc vat

DOOR LOCK SCREW Mk1 & Mk2

RMZ316

On sliding window type MK1/2 doors the door locks are held on by these 3 screws.

3/16"unf countersunk head 1" long.

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat

MK1 DOOR STRIKER AND GUIDE KIT

MSSK066

($42.00) £42.00 exc vat

($50.40) £50.40 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat

MK 1/2 EXTERNAL HINGE ANGLED SPACER

14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

DOOR POCKET LOWER LINER R/H SLIDING WINDOWS

DP3023RH

Black door pocket liner for the R/H door which has sliding windows and external hinges

($11.91) £11.91 exc vat

($14.29) £14.29 inc vat

DOOR POCKET LOWER LINER L/H SLIDING WINDOWS

DP3023LH

Black door pocket liner for the L/H door which has sliding windows and external hinges

($11.91) £11.91 exc vat

($14.29) £14.29 inc vat

CHECK STRAP RETAINER PLATE MK1/2 S/STEEL

14A764S

This stainless steel plate has recessed holes in for the check strap screws.

2 per door are required and these are only for cars with external hinges that had the material check strap as per MK1.2 and vans

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat

BARREL LOCK RETAINING CLIP (and fixing for 24A71 b...

PFR109

Clip for Door Handle required when changing barrel set. Heavy duty round spire clip specially made for the job.

($0.27) £0.27 exc vat

($0.32) £0.32 inc vat

DOOR PLATE BUFFER SCREW ( SHORT )

CMZ204

SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 1/4" LONG FOR HOLDING THE 14A6835 BUFFER PLATE TO BODY.

($0.28) £0.28 exc vat

($0.34) £0.34 inc vat

DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2

24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

($120.00) £120.00 exc vat

($144.00) £144.00 inc vat

FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES

14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

PLASTIC NUT ON DOOR FIXINGS

GFK3428

Multi purpose square plastic plug/nut for No8 screw size was used on many door fixings and fuse box to body.

Also suitable for Twin Point indicator fixings.

($0.24) £0.24 exc vat

($0.29) £0.29 inc vat

WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H

MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

($60.08) £60.08 exc vat

($72.10) £72.10 inc vat