RC40 REAR BOX MILD STEEL CENTRE EXIT LARGE BORE

The popular RC-40 exhaust system has been updated for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuraton. In addition they now have stainless ste...

($100.46) £100.46 exc vat

($120.55) £120.55 inc vat

K&N HS4/HIF AIR FILTER ELEMENT

E2601

The stock air cleaner housing for many Minis with single 1 1/2" SU carbs have historically been stuck with the paper filter. New from K&N is a replacement element for FZX3013 and all HIF that provides the benefits of K&N cleanable filtra...

($43.05) £43.05 exc vat

($51.66) £51.66 inc vat

RC40 EXHAUST FITTING KIT

RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

($6.85) £6.85 exc vat

($8.22) £8.22 inc vat

RC40 EXHAUST DOWNPIPE FREEFLOW MANIFOLD TO REAR BO...

AN180V

Copy of the original Cooper single rear box downpipe, this fits our freeflow manifold or can be shortened to fit an LCB when fitting the single rear box C-STR809 RC40 silencer.

A 3" longer version suitable for van/e...

($13.54) £13.54 exc vat

($16.25) £16.25 inc vat

CARB TO MANIFOLD GASKET 1.75" (HS6 and all HIF)

88G429B

Mini Spares own performance upgrsded paper gasket that sits either side of the carb to manifold spacer on HIF38/44 type 1.75" carbs.Sold singly, order quantity as required to suit your car.

($0.42) £0.42 exc vat

($0.50) £0.50 inc vat

MANIFOLD GASKET INLET / EXHAUST

AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

($0.96) £0.96 exc vat

($1.15) £1.15 inc vat

PLUG 5/8UNF X 5/8 SCREW INLET MANIFOLD

5-8UNF

This plug fits our inlet manifolds and Rover types with servo take off holes..

5/8 UNF grub screw that use 8mm allen key for blanking inlet servo take off or temp transmitter hole at front of pre 1996 cylinder heads. Can also use ADP210

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat

MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD

C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

($87.45) £87.45 exc vat

($104.94) £104.94 inc vat

NEEDLE BBW SWINGING - 1300 HIF44 K&N FILTER

CUD1144

If you have fitted our inlet and exhaust manifolds plus an RC40 exhaust to a stadard 1275cc engine this needle in a HIF44 carb will work great if coupled with a K&N pancake filter.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat

PERFORMANCE STAGE 1 KIT HS4/HIF38 1275 BIG BORE CE...

C-STN18B

Performance Stage one kit for 1300cc models with HS4 or HIF38 Carb with centre exit large bore exhaust system.

Always get your car rolling roaad tested for best ignition/timing and emmissions after fitment.

($289.89) £289.89 exc vat

($347.87) £347.87 inc vat

PERFORMANCE STAGE ONE KIT 1300cc WITH HIF44 (BBW)

C-STN18A

same kit as C-STN18 but with the correct needle for the larger HIF6 carb 1.75"

which has a 100 thou jet tube--an alternative to the needle supplied is BDL if other slight modifications or exhaust changes heve been made

($242.31) £242.31 exc vat

($290.77) £290.77 inc vat

DOWNPIPE FOR VAN/ESTATE/PICKUP SINGLE BOX SYSTEM

RC40-004

Genuine Mini Spares 3" Longer Downpipe for RC40 single rear Box C-STR809 when fitting to Pickup/Van and Estate. Designed to fit a freeflow manifold, will requrie cutting for LCB fitment.

You will also require the ta...

($15.38) £15.38 exc vat

($18.46) £18.46 inc vat

EXHAUST SINGLE BOX 850/1000

GEX106

Standard single box silencer exhaust for the 850/998cc saloon.

Now designed by our RC40 team as a 2 piece system for easier fitment and transportation, this fits from the original cast iron inlet/exhaust manifold

right ...

($41.60) £41.60 exc vat

($49.92) £49.92 inc vat

EXHAUST RC40 AND FITTING KIT PLUS EXHAUST MANIFOLD

RC40PACKAGE002

The famous RC40 mild steel exhaust and downpipe with a maniflow LCB plus the fitting kit for the exhaust system. There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using QL5000 type...

($159.98) £159.98 exc vat

($191.98) £191.98 inc vat

MANIFOLD TO DOWNPIPE EXHAUST CLAMP

GEX7046

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat

DOWNPIPE WITH STANDARD NECK FLANGE TO FIT RC40

LDP1

This magic pipe will allow you to upgrade to the larger bore twin box RC40 without having to change from your existing standard exhaust manifold on 998/1100cc engines. Ends where a LCB would normally finish so order the RC40-002...

($40.88) £40.88 exc vat

($49.06) £49.06 inc vat

GASKET EXHAUST DOWNPIPE INJECTION

GEX7779

Special tin plate type of gasket that goes between the manifold and exhaust downpipes on all injection cars.

($1.68) £1.68 exc vat

($2.02) £2.02 inc vat

WASHER FOR MANIFOLD THICK TYPE

12A1211

The intake/exhaust manifold should be secured to the head with brass nuts and these very thick washers. These washers are intended to not only spread the clamping action but the thickness allows them to absorb the heat without deforming! Takes 4 per ...

($0.34) £0.34 exc vat

($0.41) £0.41 inc vat

INJECTION LCB MANIFOLD WITH CAT LINK PIPE

C-AEG369

Standard bore LCB (inch and three quarters internal diameter) for post 1990 cars with catalyst that is ideal for for standard to high performance 1275s and for street 1380s. The best quality production manifold is made by Maniflow. The Long Centre B...

($141.40) £141.40 exc vat

($169.68) £169.68 inc vat

MANIFOLD GASKET INLET / EXHAUST

AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

($0.96) £0.96 exc vat

($1.15) £1.15 inc vat

DOWNPIPE TO GEARBOX EXHAUST BRACKET

GEX7526

This bracket bolts on the gearbox and attaches to the exhaust front downpipe clip GEX7053.

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat

INJECTION MANIFOLD DOWNPIPE STUD

TD108051A

Special length and thread pattern only for the exhaust manifold to downpipe of injection cars, see also FX108047 special nuts. Metric M8.

($2.56) £2.56 exc vat

($3.07) £3.07 inc vat

MANIFOLD TWIN INLET HS4/6

C-AEG489

Cast alloy type, Fits either twin HS4 or HS6.(requires modifacation to fit HS6.2 extra studs per carb)

This intake manifold for twin SUs has been carefully produced to minimize cross-port-flow interference caused by t...

($73.60) £73.60 exc vat

($88.32) £88.32 inc vat

STAINLESS STEEL DOWNPIPE FOR FREEFLOW TO REAR SILE...

RC40-058

The popular RC-40 exhaust system was updated to the Millennium range in 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they now have st...

($50.15) £50.15 exc vat

($60.18) £60.18 inc vat

MANIFOLD NUT SHORT BRASS 5/16" UNF

GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

($0.45) £0.45 exc vat

($0.54) £0.54 inc vat