SUSPENSION ADJUSTABLE RIDE HEIGHT CONES PLUS 4 GSV...
C-STR644A

($69.67) £69.67 exc vat

($83.60) £83.60 inc vat

In stockIn stock
Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" suspension because they are made from cast alloy to a special shape which improves handling and create less transmission of road noise. The best reason for fitting is balance. The total adjustability of ride heights allows you to very accurately balance the corner weight of the car.

"It's easy to change ride heights" it allows you to compensate for rubber cones that have sagged. These are the budget kits everybody is selling and although they are not the same concave shape where the rubber cone sits and not quite as road quiet as the original Hilos they also are not homologated or tested by any governing body. They are a good budget replacement for changing ride height although not as low as genuine Hilos which also improve the efficiency of the suspension cone. See HILO easy to install and adjust. Knuckle joints ARE included with this kit.

($69.67) £69.67 exc vat

($83.60) £83.60 inc vat

In stockIn stock

Recommended usage 1 x C-STR644A to fit one mini.

Alternative products

Mini Spares suspension kit includes all four adjustable machined alloy trumpets in 6082 T6 hardened alloy plus the two extended rod struts required for the rear. Many people will tell you why you should consider upgrading and using the original class...

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

Kit contained products

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

Mini Spares suspension kit includes all four adjustable machined alloy trumpets in 6082 T6 hardened alloy plus the two extended rod struts required for the rear. Many people will tell you why you should consider upgrading and using the original class...

People also bought products

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

Genuine Mini Spares UK made joints are complete with the following specifications, correct dimensions and shape metal knuckle in EN24T, with the genuine cup made in original material and correct shape (21A423MS) and an upgraded poly boot...

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

Standard gas filled replacement front shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

442001 KYB standard replacement

342001 KYB Gas filled 25% upgrade on sta...

Standard gas filled replacement rear shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

GSA71541 Unipart original offering

442001 KYB standard replacement

Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).

Tie rod extra hard rubber bush, harder than standard.

You dont want these bushes too hard as it can cause the threaded on the end of the tie rod to break under extreme conditions.

In theory the outer ones should be harder for rigidi...

Car set of 4 top Subframe tower mountings for Road cars from 1976-2000.

Aluminum pad for the top of each subframe mounting and a poly pad below to replace the standard rubbers originally fitted. The alloy pads help reduce subframe movement, ...

extra parts required to convert the C-AJJ3360 lower arms to spherical rod end type if the arms were previuosly purchased-These parts are available with the arms as C-AJJ3360A as a money saver

one piece forged lower rod end arms

unbelievably at this price they are not the welded type as sold by many of our competitors

Same as the C-AJJ3360 lower arm kit, but includes the spherical rod ends,spacers and dustcov...

All models of the Mini use the same rear hub (this piece holds the rear wheel bearings). The Mini's rear wheel bearings are more than adequate, usually requiring only occasional repacking with grease. The weak link may be the cast iron hub; it is not...

The New Front Evolution AGX shock absorber is twin tube type and gas filled. On car 8 point easy adjustable specific settings. This is currently one of the shortest fitted length dampers we stock. Closed length 210mm from pin centres. Open length is ...

Koni Shocks Possibly the best name in shock absorbers, and they're available for the Mini! Sold singly but recommend fitting pairs.



Please note some small modifications maybe necessary on the damper cover to clear the bodywork o...

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

Lower suspension arms to give 2.0 extra degrees of negative camber. Stamped with 2.0 Sold in pairs only.


General:See also c-AJJ3360 fully adjustable arms

Negative camber lower arms are specifically forged in different degrees to...

Angled grease nipple for the upper arm on the front suspension of all Minis

importantly lubricates the upper arm spindle which so often gets neglected so check yours out and make sure this nipple is working properly. Also fits rear radius ar...

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type from the 1959/60 era or any arms if they are bent or damaged. If you've ever had to rebuild a Mini trailing arm you know w...

Complete rebuild kit for rear radius arm as sold by us since 2005.

Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.

Kit Includes: shaft, beari...