WHEEL NUT NO5 LARGE SEAT CHROME 60° TAPER 1984 on
CN5

($1.55) £1.55 exc vat

($1.86) £1.86 inc vat

In stockIn stock
If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...

($1.55) £1.55 exc vat

($1.86) £1.86 inc vat

In stockIn stock

Recommended usage 16 x CN5 to fit one mini.
Rear Radius Arms, Cone Suspension - Qty 16
Driving Flanges & Front Wheel Bearings - Qty 16
Rear Radius Arms, Hydrolastic Suspension - Qty 16
Driveshafts and CV joints, Drive Flange and Front - Qty 16
Rear Radius Arm and Bearings - Qty 16

Alternative products
WHEEL NUT NO5 (TAPERED SEAT) 1984 on
CN2

These chrome wheel nuts have the 60 degree fitting angle on them which was introduced as standard on original production car wheels from 1984 on.

($1.25) £1.25 exc vat

($1.50) £1.50 inc vat
Kit products
MINISPARES WHEEL 5X12 SILVER WHL1021+CAPS+NUTS
C-21A1021

This is the ultimate in a 12" wheel-the Minilife look is the standard for the Mini car. These top quality look-alike wheels were made from some of the original designs and look great. The 5" wide design works best with small flares and a set of 165/6...

($70.06) £70.06 exc vat

($84.07) £84.07 inc vat
MINISPARES 5X12 WHEEL AND 165/60/12 FALKEN SET
WHEELPACKAGE1

Kit comprises Four 5x12 Minispares ST Wheels, and four 165/60/12 falken tyres. Please note these wheels are silver in colour and tyres are not fitted. ST logo is the old Special Tuning Abingdon logo

($417.50) £417.50 exc vat

($501.00) £501.00 inc vat
People also bought products
HEX HEAD NUT FOR 2010 ONWARDS MAMBA WHEELS
WHL1024

HEX HEAD NUT FOR 2010 ON MAMBA WHEELS BOTH 6X10 AND 6X12 WHEELS

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
CHROME WHEEL NUT FOR ROVER COOPER/SPORTSPACK WHEEL...
NAM9075MS

Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by wheel sockets. This uses 17mm socket.

($0.97) £0.97 exc vat

($1.16) £1.16 inc vat
WHEEL NUT STAINLESS STEEL FOR ROSEPETAL INCL WASHE...
C-21A1073

Stainless steel wheel nut for our 10" rose petal alloy wheels, this is the shorter version needed when using the wheels without a spacer, includes stainless steel washer. 25MM long.

($4.65) £4.65 exc vat

($5.58) £5.58 inc vat
WHEEL NUT AND WASHER REVOLUTION AND ORIGINAL MAMBA...
REV09C

Chrome wheel nut for all original Mamba and Revolution wheels except 13".



Overall length is 48mm

Sleeve length is 32mm

Sleeve diameter is 13.8mm

The washer is 2.3mm thick and outside diameter is 24mm

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
WHEEL NUT NO6 LARGE SEAT CHROME (larger CN1 equiva...
CN4

The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
WHEEL NUT STAINLESS FOR MINISPARES WHEEL INCLUDES ...
C-21A1969

Stainless steel sleeve nut with tapered washer.



5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.

The best reason for buying our wheels is that spare ...

($5.16) £5.16 exc vat

($6.19) £6.19 inc vat
WHEEL LOCKNUTS FOR MINISPARES AND ORIGINAL MINILIT...
LOCKNUT3

These fit our Minispares range of 4.5x10" and 5x12 ST wheels that have sleeve type nut and chamfered washer with the exception being C-21A1021 and WHEEL1000/1001. These also fit most of the old original Minilites from Tech Del before the...

($17.93) £17.93 exc vat

($21.52) £21.52 inc vat
WHEEL NUT PRE 60° ANGLE 10" STEEL WHEEL (ROUNDED)
88G322

The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...

($0.62) £0.62 exc vat

($0.74) £0.74 inc vat
WHEEL BOLT & WASHER 6x10 MINILITE WHEEL 50mm TOTAL...
C-21A1905

Wheel bolt for Minilites.

The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems. These are 15.75mm wide 38mm long shank with overa...

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
WHEEL NUT & WASHER 6A FOR ORIGINAL MINILITE/WOLFRA...
CN3

Over the years Minilite wheels have been made in different widths and offsets, they all took .625"(15.7mm) diameter lug nuts, but the lengths vary. They are sold "each". This one has a shank length of 19mm long and will only fit the 5x10 minilite. T...

($1.52) £1.52 exc vat

($1.82) £1.82 inc vat
WHEEL NUT FOR MINI SPECIAL ALLOY WHEEL GAW113A
GAW115A

Wheel nut for the mini 20th birthday special edition with 10" wheels. Shank length is 8.5mm, shank diameter 15mm.

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat
WHEEL BOLT & WASHER 4.5 & 5x10 MINILITE 35mm TOTAL...
C-21A1906

The Minilite company has gone through some very difficult times over the last number of years and all the changes of ownership have caused severe supply problems.

Lug nuts. 15.75mm wide shank 21.5mm long shank length and overall length of...

($2.64) £2.64 exc vat

($3.17) £3.17 inc vat
WHEEL NUT AND WASHER FOR REVOLUTION AND ORIGINAL M...
REV09

Minispares own stainless steel wheel nut and zinc plated washer for some Mamba and Revolution wheels except 13".

Shank length under the flat washer is 28mm. Shank diameter is 13.9mm.

($4.22) £4.22 exc vat

($5.06) £5.06 inc vat
WHEEL NUT FOR ROVER COOPER AND SPORTSPACK ALLOY WH...
NAM9075

Wheel Nut for Genuine Rover Cooper 8 spoke and MPI Sportspack wheel. Price is for one wheel nut not a set as pictured. You must use a 6 sided 11/16" socket and not a multi sided socket to avoid damaging the wheel nut. Original nuts from the factory u...

($1.99) £1.99 exc vat

($2.39) £2.39 inc vat
WHEEL NUT NO5 (TAPERED SEAT) 1984 on
CN2

These chrome wheel nuts have the 60 degree fitting angle on them which was introduced as standard on original production car wheels from 1984 on.

($1.25) £1.25 exc vat

($1.50) £1.50 inc vat
WHEEL NUT METRO AND LATE MINI 12" STEEL WHEELS
113087

When the 12" steel wheel was introduced as standard in 1984 they changed the wheel nut seating angle to 60 degrees.

($1.15) £1.15 exc vat

($1.38) £1.38 inc vat
WHEEL LOCKNUTS FOR NO5(CN2 TYPE)MINI 84 ON and WEL...
LOCKNUT5

For wheels with 60 degree radius angle seats CN2/CN5 or 113087 as fitted from 1984 on 12" steel wheels by Rover or any alloy with same seating including our minilife 5x12 WHL1021.

($17.93) £17.93 exc vat

($21.52) £21.52 inc vat
WHEELNUT NO 6 CHROME (CURVED SEAT) PRE 84
CN1

Chrome Lug nut.

Fit stock 10" & 12" wheels. Also fits Minator and other Mag wheels that take a radius seat type nut.

($1.02) £1.02 exc vat

($1.22) £1.22 inc vat
WHEEL LOCKNUTS FOR LATE MINI ROVER 8 SPOKE ALLOY W...
LOCKNUT1

This locknut set fits any Rover Cooper 8 spoke alloy wheel that was fitted with the NAM9075 s/steel covered wheel nut or the standard AJM1139 non covered variety which were both 11/16"in size. Price is for one set.

($17.93) £17.93 exc vat

($21.52) £21.52 inc vat
WHEEL CENTRE CAP FOR DUNLOP D1 ALLOYS
WHL1023

Dunlop D1 centre cap for WHL1004 wheels. Fits 51mm hole.

($3.72) £3.72 exc vat

($4.46) £4.46 inc vat