CLUBMAN SHAPE BONNET
CZH2609

($225.00) £225.00 exc vat

($270.00) £270.00 inc vat

In stockIn stock
Available again from genuine tooling

Fits all mini clubmans only. There is no aftermarket version available of this bonnet anymore.





this bonnet MUST use the later 1981 onwards BMP348 / BMP349 hinges

($225.00) £225.00 exc vat

($270.00) £270.00 inc vat

In stockIn stock

Recommended usage 1 x CZH2609 to fit one mini.
Bonnet and Catches - Qty 1

People also bought products
BONNET LANDER PANEL CLUBMAN
CZH149

Genuine bonnet lander panel for the Clubmman. See MS149 which is the non genuine alternative.

($60.00) £60.00 exc vat

($72.00) £72.00 inc vat
BONNET ASEMBLY VAN & PICKUP 1971 on
ALA8430

For vans and pickups this had later type hinge positions 1.25" from the edge as per the saloon but did not have the extra lip for the bonnet upper grille moulding which was never fitted as standard---Mk1/2 variants had the hinges in a different posit...

($230.00) £230.00 exc vat

($276.00) £276.00 inc vat
BONNET HOOK SLAM PLATE ON FRONT PANEL STAINLESS ST...
ALR1441SS

For MPI only when bonnet hook has been moved to central position.



This plate protects the bonnet lander panel from the hook and acts as a stiffener also. Stainless steel version.

($5.93) £5.93 exc vat

($7.12) £7.12 inc vat
BONNET HOOK CLEVIS PIN
4B8769

This is the Clevis pin for the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while dri...

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat
BONNET HINGE PAIR for MK3 MINIS on
HMP441027

A pair of bonnet hinges for mk3 saloons after 1971 unpainted

($33.15) £33.15 exc vat

($39.78) £39.78 inc vat
BONNET LOCK PIN .CLUBMAN only
14G2444

Bonnet lock pin for MiniClubman ,Midget,MGB a

($4.53) £4.53 exc vat

($5.44) £5.44 inc vat
BONNET LANDER PANEL CLUBMAN
MS149

The only bonnet landing panel available for the clubman shape body for a long time this part is perfect in every detail and was used on the heritage bodyshells.

A Genuine panel is now available from BL Heritage CZH149.

...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat
BONNET RELEASE CABLE
FSE10020

Bonnet locking cable fitted as standard on all Twin point injection minis plus other models from 1992/3. This cable is in our kit GS130273 to fit all minis as an accessory.

($12.16) £12.16 exc vat

($14.59) £14.59 inc vat
BONNET SPRING FOR CLUBMAN THIMBLE PIN
4G1588

the clubman had a longer and wider spring for the bonnet release thimble

3.25"long and 1.5" wide

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat
QUICK RELEASE BONNET HINGE PR MK3 ONWARDS
MSSK019

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

($41.23) £41.23 exc vat

($49.48) £49.48 inc vat
BONNET REAR GUTTER SEAL ENGINE BAY AS FITTED FROM ...
JRC8000

This is the last seal fitted by the Rover factory on all twin point injection cars. It sits under the bonnet on the windscreen scuttle panel and down the front wings about 9" each side.It needs the right angle corners to be created when fitting, cut ...

($10.05) £10.05 exc vat

($12.06) £12.06 inc vat
BONNET FRONT DRAIN SEAL
JRC7898

This is the seal that goes on the front of the bonnet to stop rain getting at

your electrics or causing rust and was fitted to every mini and Clubman.

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
BONNET PROP ROD
BKD360030

Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...

($8.50) £8.50 exc vat

($10.20) £10.20 inc vat
BONNET TAILORED SOUND PROOF FELT KIT
47H9615

Four tailor made felt pieces to fit in the segments between the bonnet strengthening webs to allow maximum under bonnet clearance.

See FELT860 for spray adhesive. These are about 1cm thick and the original very thick sound dea...

($25.60) £25.60 exc vat

($30.72) £30.72 inc vat
BONNET SAFETY CATCH HOOK-ALL MINIS
14A366

This is the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while driving should the lat...

($17.00) £17.00 exc vat

($20.40) £20.40 inc vat
CLUBMAN BONNET BUFFER
AAU5486A

BONNET BUFFER, 1500.

($1.47) £1.47 exc vat

($1.76) £1.76 inc vat
BONNET PINS - BLUE
BSP002

Heavy duty bonnet pin kit, contains a pair of pins AND all the mounting hardware.

($9.92) £9.92 exc vat

($11.90) £11.90 inc vat
BONNET STRAP TAN ORIGINAL WORKS TYPE-SINGLE STRAP
C-AJJ3381

This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. Original light colour Tan leather

3.3mm thick from the tanneries for use on horse bridles, with alloy fastening. Screws ...

($13.65) £13.65 exc vat

($16.38) £16.38 inc vat
BONNET LOCK THIMBLE CLUBMAN TYPE ONLY
4G3676

This will only fit the clubman models and not standard minis

($4.39) £4.39 exc vat

($5.27) £5.27 inc vat
BONNET REAR DRAIN SEAL
JRC7008

This seal actually fits on the scuttle lip and was always included in the ignition electrics protection kits. Found on all years of cars but fitted as standard in the 80s for a while.

($14.95) £14.95 exc vat

($17.94) £17.94 inc vat