EARLY CLASSIC MINI PHONEHOLDER WITH USB

The classic Mini phone holder with USB replaces the existing chrome ashtray in the metal top dash rail

Key Features:

Plate is made from powder coated 3mm steel

Spring loaded clamp, hold phones between 5...

($29.73) £29.73 exc vat

($35.68) £35.68 inc vat

CLASSIC MINI ASHTRAY INSERT W/CLOCK & USB (GREEN D...

CLOCK04

The Classic mini ashtray replacement digital clock has been designed to seamlessly replace the ashtray insert to ensure the integrity of your classic mini dashboard is maintained whilst introducing the modern technology of our digital clock and optio...

($34.08) £34.08 exc vat

($40.90) £40.90 inc vat

CLASSIC MINI ASHTRAY INSERT W/CLOCK & USB (RED DIG...

CLOCK03

The Classic mini ashtray replacement digital clock has been designed to seamlessly replace the ashtray insert to ensure the integrity of your classic mini dashboard is maintained whilst introducing the modern technology of our digital clock and optio...

($34.08) £34.08 exc vat

($40.90) £40.90 inc vat

DASHBOARD FRESH AIR VENT DUCT

37H7035MS

Fresh air vent for the dash, these bolt to the bulkhead and the eyeball socket vents fit into them. These used to be handed but this vent has both hole patterns so will fit both sides. This replaces 37H7035, 37H7036, JJB101000 and JJB101010. Sold ind...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

CLIP FOR 14A8009 MOULDING

14A8010

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

($1.22) £1.22 exc vat

($1.46) £1.46 inc vat

INSTRUMENT CLUSTER PRINTED CIRCUIT 1989-1996 3-CLO...

CDU3247

Printed circuit board for 1989 to 1996 3 clock Nippon Seiko type Mini gauge clusters. These have been unavailable for many years but have now been remade exclusively for Minispares.

($72.00) £72.00 exc vat

($86.40) £86.40 inc vat

FRESH AIR VENT FOAM SEAL ON BULKHEAD

ALA6292

FOAM SEAL FOR USE WITH 37H7035MS AIR DUCT

($0.53) £0.53 exc vat

($0.64) £0.64 inc vat

EYEBALL VENT METAL COVER SET (4 PIECES) TO BE STUC...

MSA0212

2 outer rings and 2 inner knobs which have to be stuck on.

($7.15) £7.15 exc vat

($8.58) £8.58 inc vat

DASH LOWER PARCEL SHELF LINER

VGA1995

The black vinyl covering that lays on your lower dash shelf. For cars after 1970 where the facia panel is not a full metal panel you must fit (link)DT3076(/link)

($17.25) £17.25 exc vat

($20.70) £20.70 inc vat

DASH CARDS (Oval NO AIR VENTS) BLACK VINYL

ALE2927

Dash liners without air vents for either side of the speedo on deluxe versions such as the Cooper S with centre speedo and two gauges which are black vinyl covered as opposed to the painted type. Not for the single centre clock only.

see [li...

($36.59) £36.59 exc vat

($43.91) £43.91 inc vat

DASH CARDS(OVAL WITH VENTS)BLACK PAINTED PAIR

VGA4188

Black painted liners for deluxe cars with air vents and central speedo and 2 gauges.

($17.00) £17.00 exc vat

($20.40) £20.40 inc vat

DASHBOARD ALLOY DASH 3 CLOCK RHD

DASH017

Alloy dash for cars with 3 clock cluster in front of driver and R/H/D.

Most of these dashes now have a knob for opening the passenger side glove pocket so check when ordering if you have specific requirements.

($185.17) £185.17 exc vat

($222.20) £222.20 inc vat

DASH CARDS (OVAL WITH VENTS) VINYL COVERED

ALE2928

Dash liners with air vents for on de luxe versions with centre speedo and two gauges which are black vinyl covered as opposed to the painted type. Not for the single centre clock only. The cardboard is cut out but the vinyl needs trimming when fittin...

($37.73) £37.73 exc vat

($45.28) £45.28 inc vat

SWITCH PANEL 4 SWITCH HOLES MK4 ONWARDS

JPC2839

Late type swith carrier with 4 square holes plus heater and choke cable holes-uses the ratchet type choke cable with D shape fitting--earlier cars used round hole for pull and push chooke cableCZH3591

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat

INTERIOR LAMP MK1 POINTED ENDS

14A9148

Interior lamp with a black on/off switch and pointed torpedo ends.

Also fitted many of the 1959on range of Austin A55/60 Cambridge, MG Magnette etc.

Also there was an alternative lamp with black switch and square ends 13H192 which w...

($28.00) £28.00 exc vat

($33.60) £33.60 inc vat

SEAT BASE FOAM FRONT 1993-2000 MODELS

SF685

Seat front base foam replacement. Moulded foam base and only one available solely from us, has been used on 1993 to 2000 cars. Made from sample from Rover of HGA100840

($42.00) £42.00 exc vat

($50.40) £50.40 inc vat

MPI GREY CLOTH HEADLINING KIT 1996 ON HL3015P

HL3015

Headlining kit for MPI cars, this is grey cloth as apposed to vinyl (much nicer in our opinion). Rear C post panels included.

($129.05) £129.05 exc vat

($154.86) £154.86 inc vat

STAINLESS STEEL DRIP TRAY

TOOL32

We all knows Mini's like to leak a little oil... This drip tray is great for protecting your garage floor, low profile and measures 60x40cm.

Perfect for using whilst rebuilding heads, engines and gearboxes to keep all the small pa...

($14.85) £14.85 exc vat

($17.82) £17.82 inc vat

FLYWHEEL LOCKING TOOL

TOOL25

This tool bolts where the starter motor fits to lock the flywheel in place when trying to remove the flywheel bolt/crank pulley etc.

($19.50) £19.50 exc vat

($23.40) £23.40 inc vat

RED RUBBER GREASE 500g

DEP74500

Red Rubber Grease has been specifically designed for use in environments where compatibility with seals and/or resistance to Hydrocarbons is required. Red Rubber Grease is compatible with both natural rubber and synthetic seals. The formulation of th...

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat