DOOR DRAIN TUBE FOR EXTERNAL HINGE TYPE DOOR
14A7930

(3,75 €) £3.75 exc vat

(4,50 €) £4.50 inc vat

In stockIn stock
These special hoses are for all sliding window type doors to drain the water away from the channels. The thin end of the hose slides into the bottom tube to ensure water goes out and cannot leak into the bottom of the door and the top slides over the...

(3,75 €) £3.75 exc vat

(4,50 €) £4.50 inc vat

In stockIn stock

Recommended usage 4 x 14A7930 to fit one mini.
Front Door - Sliding window type - Qty 4

People also bought products
MK1 DOOR STRIKER AND GUIDE KIT
MSSK066

(42,00 €) £42.00 exc vat

(50,40 €) £50.40 inc vat
SLIDING WINDOW CATCH SET METAL
MSSK015METAL

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

(255,00 €) £255.00 exc vat

(306,00 €) £306.00 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

(1,00 €) £1.00 exc vat

(1,20 €) £1.20 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

(29,52 €) £29.52 exc vat

(35,42 €) £35.42 inc vat
MK 1/2 EXTERNAL HINGE ANGLED SPACER
14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

(0,90 €) £0.90 exc vat

(1,08 €) £1.08 inc vat
DOOR STRIKER PLATES STAINLESS STEEL PAIR
CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

(11,63 €) £11.63 exc vat

(13,96 €) £13.96 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

(1,76 €) £1.76 exc vat

(2,11 €) £2.11 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

(1,76 €) £1.76 exc vat

(2,11 €) £2.11 inc vat
SCREW FOR MK3 DOOR HANDLE
PMZ306

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

(0,30 €) £0.30 exc vat

(0,36 €) £0.36 inc vat
DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2
24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

(120,00 €) £120.00 exc vat

(144,00 €) £144.00 inc vat
VAN REAR HINGE GASKET
ALA8465

Van, Clubman Estate, Traveller and Countryman rear door hinge gasket. (sold individually)

(0,80 €) £0.80 exc vat

(0,96 €) £0.96 inc vat
WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME
24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

(2,60 €) £2.60 exc vat

(3,12 €) £3.12 inc vat
DOOR HINGE LOWER FOR BOTH SIDES MK3 ON
CZH212MS

Lower internal door hinge for either side.

Fits all wind up window type doors from 1970 on.

(14,40 €) £14.40 exc vat

(17,28 €) £17.28 inc vat
DOOR HINGE L/H UPPER MK3
CZH203MS

upper door hinge l/h for wind up window type door with internal hinge 1970on

this is not a genuine part and is available in a car set kit MSSK017B

See CZH203 for genuine

(14,40 €) £14.40 exc vat

(17,28 €) £17.28 inc vat
DOOR HINGE R/H UPPER MK3
CZH202MS

Non genuine hinge for R/H upper on wind up window type doors with internal hinges from 1970on. See kit MSS017B for better price.

(14,40 €) £14.40 exc vat

(17,28 €) £17.28 inc vat
DOOR MOULDING WEATHERSTRIP KIT INNER AND OUTER WIT...
MSSK2104

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

(56,28 €) £56.28 exc vat

(67,54 €) £67.54 inc vat
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

(60,08 €) £60.08 exc vat

(72,10 €) £72.10 inc vat
CHECK ARM SEAL L/H 1986 ON
CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

(3,50 €) £3.50 exc vat

(4,20 €) £4.20 inc vat
CHECK ARM SEAL R/H 1986 ON
CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

(3,50 €) £3.50 exc vat

(4,20 €) £4.20 inc vat
CHECK ARM RUBBER GROMMET O/S 1970-1986
CZH4052

Moulded shape type right hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

(2,56 €) £2.56 exc vat

(3,07 €) £3.07 inc vat