EBC BLUE STUFF BRAKE PADS FOR 8.4" DISCS
C-AHT16BLUE

(64,50 €) £64.50 exc vat

(77,40 €) £77.40 inc vat

In stockIn stock
EBC Blue Stuff pads are the endurance-grade, longest lasting material. Blue Stuff pads have a slightly lower friction coefficient than their counterparts; Green Stuff, Yellow Stuff and Red Stuff, but delivers far longer life.



Blue Stuff is suitable for endurance races up to six hours in duration on most types of saloon cars. It is obviously the drivers responsibility to evaluate the lifetime before undertaking any types of race use but Blue Stuff brakes are designed with endurance racing in mind.





A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

(64,50 €) £64.50 exc vat

(77,40 €) £77.40 inc vat

In stockIn stock

Recommended usage 1 x C-AHT16BLUE to fit one mini.

Recommended products

Not included with any brake pads these days owing to universal usage these

pins and retainer clips should always be changed when fitting new pads.

For vehicles with 8.4" discs and standard 2 pot calipers,1984 onwards.

People also bought products

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

Mintex brake shoes for the rear of all minis which are 1.25" wide. Also fitted to front on early single leading shoe cars (dry suspension pre 1964) with a single wheel cylinder. Manufactured by Mintex and sold as a box set of 4 brake shoes for one re...

Take the squeal out of your discs-late model Mini or Spridget.

For those old original drum brakes on the front of a mini with 1.5" wide type fitted. Some pre 1964 dry suspension had the smaller rear type 1.25" wide fitted the same as the rear. After Unipart's demise our stock from Oct 1st will be Mintex as used ...

Pair of 4-pot alloy calipers for 8.4" diameter brake discs with 12" (or bigger) wheels. Kit includes pad pins, but not brake pads.


The advantage of alloy calipers is that they dissipate heat quicker, reducing fluid boiling. The design a...

UK made 8.4" brake disc. Priced individually but should always be replaced in pairs for safety and braking efficiency. These are the best quality available of the low priced brake discs on the market and suitable for all standard road use.Beware of t...

For front twin-leading shoe drum brakes 1964-84 .Use a pair of these each wheel. A good mechanic will replace the pull-off springs 27H3753 when installing new shoes. The return springs rust and fatigue over time and may have been damaged...

Suitable for standard 8.4" / 7.5" /7" brake calipers. Also used for front wheel cylinders on twin leading shoe type drum brake cars. This is where you have 2 cylinders per hub as opposed to the early single leading type which had one cylinder only pe...

Genuine O ring seal between the two halves of the standard 8.4" disc size caliper, with only one piston per half. Sold singly per caliper, 2 required per car.

The screw that holds the drum on the hub. Earlier hubs had two screws, many replacements have only one, all that’s needed.

Not included with any brake pads these days owing to universal usage these

pins and retainer clips should always be changed when fitting new pads.

For vehicles with 8.4" discs and standard 2 pot calipers,1984 onwards.

8.4" diameter as used standard on all late model Minis with 12 or 13 inch wheels. Our premium quality item. See GBD90806MS for a cheaper option.

Sold individually, but should be replaced as pairs.

Pack of 4 pins, always required when changing pads--on 8.4 size brake discs as fitted from 1984 onwards. For kit with retainer clips see GBK1026. See GBK1025 for vented discs.

The pins also fit the Austin 1100/1300 ...

Genuine AP product as original.This strange looking coily spring holds the front brake shoes against the drum for better braking efficiency by holding them in a set position which also cuts out brake judder caused by sideways movement.

Fitte...

Grooved and dimpled 8.4 discs (pair).

Suitable for all classic Minis built from 1984 to 2000 except ERA.

Genuine Lockheed seal repair kit. Minis from 1984 on with 8.4" discs plus.

This rebuild kit also fits the Midget/Sprite 1098/1275cc front disc brake calipers. The kit includes all the large seals needed to do both pistons in one caliper exce...

If you have original drum brakes on the front of your mini with twin leading shoes (2 cylinders per drum) this is the kit of 4 tension springs you should change. Originally a double spring type they are now single spring coil per item but more effici...

Genuine AP car set of 4 brake hose for cars with front disc brakes. If you are changing one through wear and tear it is a good idea to change the whole set and save money with peace of mind about your brake system. Securing nuts included