DUAL FLYWHEEL PULLER VERTO AND PRE VERTO

CE1

(25,43 €) £25.43 exc vat

(30,52 €) £30.52 inc vat

In stock

Don't try to remove the flywheel on a Mini without one of these special pullers. The tappered seat must by design be extremely tight and this special puller leverages in the correct place to make removal possible. And since you can not change the cl...

(25,43 €) £25.43 exc vat

(30,52 €) £30.52 inc vat

In stock

Recommended usage 1 x CE1 to fit one mini.

People also bought products

TORQUE CONVERTER PULLER AUTO

18G1086

Torque converter puller tool for automatics, made in the UK.

(55,43 €) £55.43 exc vat

(66,52 €) £66.52 inc vat

MINI RADIUS ARM BUSH REMOVAL AND REAMING TOOL

TOOL33

Radius arm bearing removal, fitting and reaming tool fitted with a pilot to keep the reamer in line with the needle roller bearing. Full instructions supplied.

(127,50 €) £127.50 exc vat

(153,00 €) £153.00 inc vat

STAINLESS STEEL DRIP TRAY

TOOL32

We all knows Mini's like to leak a little oil... This drip tray is great for protecting your garage floor, low profile and measures 60x40cm.

Perfect for using whilst rebuilding heads, engines and gearboxes to keep all the small pa...

(14,85 €) £14.85 exc vat

(17,82 €) £17.82 inc vat

IMPERIAL/METRIC OFFSET FEELER GAUGE SET

TOOL30

Metric & Imperial offset feeler gauge set, ideal for setting tappet clearnace, primary gear end float etc. Offset for ease of use.

Imperial: .005/.006/.007/.008/.009/.010/.011/.012/.013/.014/.015/.016/.017/.018/.019/.020/...

(9,41 €) £9.41 exc vat

(11,29 €) £11.29 inc vat

AF/IMPERIAL & METRIC COMBINATION SPANNER SET 32PC

TOOL31

Imperial & Metric spanner set ideal for completing most tasks on your classic Mini, these are mirror polished spanners.

Contents: Bi Hex x Metric combination spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19mm and Stubby 10, 11, 12, ...

(41,34 €) £41.34 exc vat

(49,61 €) £49.61 inc vat

3/8" AF IMPERIAL DEEP SOCKET SET 8PC

TOOL29

3/8" 6 point deep AF/Imperial Socket set

Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

(20,46 €) £20.46 exc vat

(24,55 €) £24.55 inc vat

3/8" AF IMPERIAL SHALLOW SOCKET SET 8PC

TOOL28

3/8" 6 point shallow AF/Imperial Socket set

Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

(12,38 €) £12.38 exc vat

(14,86 €) £14.86 inc vat

1/4" AF IMPERIAL DEEP SOCKET SET 9PC

TOOL27

1/4" 6 point deep AF/Imperial Socket set

Sizes 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" AF

(12,08 €) £12.08 exc vat

(14,50 €) £14.50 inc vat

1/4" AF IMPERIAL SHALLOW SOCKET SET 9PC

TOOL26

1/4" 6 point Shallow AF/Imperial Socket set

Sizes 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" AF

(9,41 €) £9.41 exc vat

(11,29 €) £11.29 inc vat

FLYWHEEL LOCKING TOOL

TOOL25

This tool bolts where the starter motor fits to lock the flywheel in place when trying to remove the flywheel bolt/crank pulley etc.

(19,50 €) £19.50 exc vat

(23,40 €) £23.40 inc vat

RED RUBBER GREASE 500g

DEP74500

Red Rubber Grease has been specifically designed for use in environments where compatibility with seals and/or resistance to Hydrocarbons is required. Red Rubber Grease is compatible with both natural rubber and synthetic seals. The formulation of th...

(13,50 €) £13.50 exc vat

(16,20 €) £16.20 inc vat

CASTROL CLASSIC OIL PUMP CAN

J106

Classic Castrol oil can with flexible spout and thumb pump.

(9,69 €) £9.69 exc vat

(11,63 €) £11.63 inc vat

CARTRIDGE GUN

GAC8001

Cartridge gun for most silicone sealants including our RTV (GAC8000).

(4,48 €) £4.48 exc vat

(5,38 €) £5.38 inc vat

OIL FILTER WRENCH

TOOL09

Three arm oil filter wrench ideal for changing the spin on filters on Mini's. Comes with adaptor for 3/8" or 1/2" drive, suitable for filters from 65-120mm diameter.

Mini Spares offer this tool with a MSF166 filter for nearly no...

(26,10 €) £26.10 exc vat

(31,32 €) £31.32 inc vat

1/2" HEX KEY SOCKET FOR CRANK BOLT

TOOL22

1/2" hex key socket needed when using our upgraded crank pulley bolt C-AHT147, 1/2" drive.

(3,00 €) £3.00 exc vat

(3,60 €) £3.60 inc vat

COPPER GREASE high melting point 500g

DEP73500

Copper Grease/Anti-Seize high melting point assembly grease supplied in 500g tub, suitable for jobs such as lubricating bolt threads, essential for any restoration project!

(13,13 €) £13.13 exc vat

(15,76 €) £15.76 inc vat

SPECIAL WASHER FOR SEATING CV AND WHEEL BEARINGS S...

TOOL21

CV fitting tool, designed to assist with the correct fitting of CV joints, wheel bearings or drive flanges, as specified in the Haynes workshop manual. The wheel bearing should be torqued to the specified setting using this washer, and then removed a...

(4,50 €) £4.50 exc vat

(5,40 €) £5.40 inc vat

A SERIES CRANKSHAFT TAP 5/8" X 16 TPI WHITWORTH TH...