WINDOW CATCH PLASTIC SET
MSSK015

(69,10 €) £69.10 exc vat

(82,92 €) £82.92 inc vat

In stockIn stock
Sliding window Mini models all must now use these black plastic locks for the windows. Our special kit includes a complete set of all the pieces: 4 latches, rubber seals, screws and chrome nuts.This kit is a great saving over buying all the parts individually .

Kit includes 24A1194 24A1195 24A1196 24A1197 PLASTIC BLACK CATCHES

4 14A8151 chrome boss

4 RMP307 chrome head special screw

4 24A1198 rubber between catch and glass

4 14A7065B washer for the boss to glass

(69,10 €) £69.10 exc vat

(82,92 €) £82.92 inc vat

In stockIn stock

Recommended usage 1 x MSSK015 to fit one mini.

Recommended products
WEATHERSTRIP KIT MSSK021 PLUS 24A1304 L/H
MSSK023

Sliding window type weatherstrip kit L/H.

Kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with...

(59,28 €) £59.28 exc vat

(71,14 €) £71.14 inc vat
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

(60,08 €) £60.08 exc vat

(72,10 €) £72.10 inc vat
Alternative products
SLIDING WINDOW CATCH SET METAL
MSSK015METAL

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

(255,00 €) £255.00 exc vat

(306,00 €) £306.00 inc vat
Kit contained products
FIBRE WASHER FOR WINDOW CATCH BOSS
14A7065B

For all sliding window models this washer sits against the chrome boss 14A8151 that hold the window catches.

(0,37 €) £0.37 exc vat

(0,44 €) £0.44 inc vat
SLIDING WINDOW PLASTIC CATCH O/S/F
24A1194

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

(10,31 €) £10.31 exc vat

(12,37 €) £12.37 inc vat
WINDOW CATCH GASKET MK1/2
24A1198

Plastic seal for the MK1/2 window locks. Takes 4 per car.

(3,05 €) £3.05 exc vat

(3,66 €) £3.66 inc vat
SLIDING WINDOW CATCH CHROME RETAINING BOSS
14A8151

This is the chrome button type boss on the sliding window minis to hold the window catch -see RMP307 for chrome screw to retain this boss and 14A7065B for the fibre washer between the boss and the glass.

(4,80 €) £4.80 exc vat

(5,76 €) £5.76 inc vat
SLIDING WINDOW PLASTIC CATCH O/S/R
24A1196

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

(10,31 €) £10.31 exc vat

(12,37 €) £12.37 inc vat
SLIDING WINDOW PLASTIC CATCH N/S/F
24A1195

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

(10,31 €) £10.31 exc vat

(12,37 €) £12.37 inc vat
SLIDING WINDOW PLASTIC CATCH N/S/R
24A1197

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

(10,31 €) £10.31 exc vat

(12,37 €) £12.37 inc vat
SCREW FOR WINDOW BOSS AND CZA7109
RMP307

This is the chrome screw that fits the 14A8151 catch boss on sliding window minis. Also fits the door winder handle on early wind up window cars.

(0,56 €) £0.56 exc vat

(0,67 €) £0.67 inc vat
People also bought products
MK1 DOOR STRIKER AND GUIDE KIT
MSSK066

(42,00 €) £42.00 exc vat

(50,40 €) £50.40 inc vat
SLIDING WINDOW CATCH SET METAL
MSSK015METAL

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

(255,00 €) £255.00 exc vat

(306,00 €) £306.00 inc vat
RIVET CLIP UPPER DOOR MOULDING (BOTTOM)
13H744

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

(0,83 €) £0.83 exc vat

(1,00 €) £1.00 inc vat
DOOR CHECK STRAP MK III ONWARDS NON GENUINE
ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

(7,50 €) £7.50 exc vat

(9,00 €) £9.00 inc vat
STAINLESS STEEL GLASS WINDOW RAIL SUPPORT KIT WITH...
MSSK2105SS

Mini Spares own MK3 Window drop rail kit includes 1 x ALA5746SS AND1 x ALA5747SS plus 2 x 24A948 seals for the drop rails to hold the glass, this kit will do one complete door only.

(32,00 €) £32.00 exc vat

(38,40 €) £38.40 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

(1,00 €) £1.00 exc vat

(1,20 €) £1.20 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

(29,52 €) £29.52 exc vat

(35,42 €) £35.42 inc vat
MK 1/2 EXTERNAL HINGE ANGLED SPACER
14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

(0,90 €) £0.90 exc vat

(1,08 €) £1.08 inc vat
DOOR STRIKER PLATES STAINLESS STEEL PAIR
CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

(11,63 €) £11.63 exc vat

(13,96 €) £13.96 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

(1,76 €) £1.76 exc vat

(2,11 €) £2.11 inc vat
DOOR HINGE FITTING KIT COMPLETE MK3 ON
MSSK017FK

MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)

(18,09 €) £18.09 exc vat

(21,71 €) £21.71 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

(1,76 €) £1.76 exc vat

(2,11 €) £2.11 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

(0,92 €) £0.92 exc vat

(1,10 €) £1.10 inc vat
DOOR PLATE BUFFER SCREW ( SHORT )
CMZ204

SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 1/4" LONG FOR HOLDING THE 14A6835 BUFFER PLATE TO BODY.

(0,28 €) £0.28 exc vat

(0,34 €) £0.34 inc vat
SCREW FOR MK3 DOOR HANDLE
PMZ306

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

(0,30 €) £0.30 exc vat

(0,36 €) £0.36 inc vat
DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2
24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

(120,00 €) £120.00 exc vat

(144,00 €) £144.00 inc vat
VAN REAR HINGE GASKET
ALA8465

Van, Clubman Estate, Traveller and Countryman rear door hinge gasket. (sold individually)

(0,80 €) £0.80 exc vat

(0,96 €) £0.96 inc vat
WIND DEFLECTORS FOR FRONT DOORS WIND UP WINDOW TYP...
MSA1102

A great accessory for wind up window minis. Fitted in minutes to make such a difference driving your Mini with the window open. Wonderfull for those that smoke or love fresh air. In a tinted colour to stop bad reflections.

(53,49 €) £53.49 exc vat

(64,19 €) £64.19 inc vat
FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES
14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

(7,50 €) £7.50 exc vat

(9,00 €) £9.00 inc vat
DOOR SEAL UPPER L/H TWIN POINT CARS 1996on
CFB101130

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim, fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

(16,50 €) £16.50 exc vat

(19,80 €) £19.80 inc vat