(58,44 €) £58.44 exc vat
(70,13 €) £70.13 inc vat
In stock
Rover piston TAM2048 stamped 21962 with ring sizes 1.501mm and oil ring 4mm but some pistons have been stamped 21963.
-Does this get confusing?
So lets clear it up; the easy way to identify the piston and corrrect rings are as follows-they are made from the same piston slug with same dish but the high compression version is easily identified by the lower oil ring being 3mm wide and the top ring gap to the crown is 10mm deep.
The low compression version has 4mm oil ring and a shorter length top ring gap of about 7mm to the crown/top. The gudgeon pin is moved on production to give the higher compression ratio and lowering the rings giving a larger top ring land for strength. Rings for 3mm lower oil ring type are R41570-00.
if you have 4mm oil ring use R35960-00.
(58,44 €) £58.44 exc vat
(70,13 €) £70.13 inc vat
In stockRecommended usage 1 x R35960-00 to fit one mini.
998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...
60 thou oversize low drag slipper type pistons for modern day compression ratios and unleaded fuel.
Typically installation will result in a minimum 8.8:1 compression ratio but on some Metro versions it was higher.
Current pistons ...
Standard Size with 0.59" compression rings and 0.1181" oil ring for 998cc
3mm OIL RING with compression ring size .0591" (1.5mm)and one piece oil ring .1181" (3mm)on p21253 pistons giving 9.7cr on 1275cc. std ring size
For performance see steel ring set with 3 piece oil ring as favoured by engine builders[link]C1...
3mm OIL RING with compression ring size .0591" (1.5mm)and one piece oil ring .1181" (3mm)on p21253 pistons giving 9.7cr on 1275cc. 20 thou oversize
For performance see steel ring set with 3 piece oil ring as favoured by engine builders[link]...
Low drag 1275 piston standard size 2.780 plus 20 thou oversize(Rings included).
This piston has a possible compression ratio of 10.3:1 as fitted to Cooper RSP 1990.
The best performance 1275 pistons are C-STN100 range which have 9.7...
Rover piston TAM2048 stamped 21962 with ring sizes 1.501mm and oil ring 4mm but some pistons have been stamped 21963.
-Does this get confusing?
So lets clear it up; the easy way to identify the piston and corrrect rings are as follo...
Rover piston TAM2048 stamped 21962 with ring sizes 1.501mm and oil ring 4mm but some pistons have been stamped 21963.
-Does this get confusing?
So lets clear it up; the easy way to identify the piston and corrrect rings are as follo...
3 compression ring @ 0.625" oil ring 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.
20 thou oversize low drag slipper type pistons for modern day compression ratios and unleaded fuel.
Typically installation will result in a minimum 8.8:1 compression ratio but on some pre 1984 Metro versions it was higher.
Current...
3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.
STD size low drag slipper type pistons with a minimum 8.8:1 compression ratio but on some Metro versions it was higher.
Current pistons differ from the 60s originals, improved with a "low drag" slipper skirt design and a shorter lighter wri...
40 thou oversize low drag slipper type pistons for modern day compression ratios and unleaded fuel.
Typically installation will result in a minimum 8.8:1 compression ratio but on some pre 1984 Metro versions it was higher.
Current...
AE Hepolite +20 Engine set of rings for C-AJJ3378/20 C-AJJ3382-60 Mega and Omega pistons when rings are 0.0470"(1.2mm) and 0.1575" 4mm oil rings.
For latest spec race quality NPR rings see C-STN102-20
Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).
You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...
Set of +0.003" size 1275 crank thrust washers.
Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.
Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...
ACL Race Bearings
ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.
What is the purpose of ACL Race series bearings?
...
ACL Race Bearings
ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.
What is the purpose of ACL Race series bearings?
...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.