COOPER S 3 CLOCK BINNACLE SET 130MPH MAGNOLIA
13H4442MGKIT

£441.35 exc vat

£529.62 inc vat

In stockIn stock
Complete binnacle set for centre speedo cars, kit includes 130 mph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge clusters positioned in front of driver to convert over to this 3 clock central fitting kit.Order as PM05

£441.35 exc vat

£529.62 inc vat

In stockIn stock

Recommended usage 1 x 13H4442MGKIT to fit one mini.

Recommended products

This is the wiring short conversion loom that fits to the old central speedo and is used by people modifying from 2 or 3 clock dashes to single clock or just repairing damaged looms. With the correct bulb holders and spade fittings. Now uses 5x [link...

Kit contained products

Magnolia face. This replica of the Cooper S Speedo is marked to 130 MPH. Geared for 3.44 final drive. Includes voltage stabilizer and fuel gauge.

The black plastic pod which mounts the speedo and two gauges in the original central position. In the 1970's and 1980's a great number of Mini owners caught the customizing bug and a lot of Minis had custom dashboards installed. Now we're going the o...

Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. With a magnolia face.



Does not come with bulb holder or bulb.

These are the little 'whisker clips' that hold the 14A9907 bezel on the front of the oval 3-instrument gauge pod 24A2702. The 'ears' slot into the back of the bezel and the tails that stick out go thru one of 14 holes in the...

Bezel for 24A2702 oval 3-gauge pod. This is the brightwork trim on the front of the plastic pod, it is held on with up to 14 whisker clips 14A9796. The clip to join the ends together for neatness is 24A472
<...

Oil pressure is the "blood pressure" of your engine! Know how it is doing and you know how your engine is doing. This Smith's gauge is the standard 2" diameter with chrome bezel. With a magnolia face. Mechanical.

Does not come with pipewor...

People also bought products

Original black face time clock with Smiths name on face.52mm diameter clock. 12 hour analogue clock also available in white face as SIB110MG.

Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge...

With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...

We sell about 20 of these per year and many are used on similar models to those indicated-Main and dash loom only--No side wing indicators-indicator stalk on right-alternator-rear lamps with reverse lights-steering lock-inertia starter-centre speedo ...

Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.

Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.

Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.

Oil gauge adaptor for fitting into engine block or T piece.

A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.

Speedometer cable, 30" long for Smiths type central speedo-original was 26" long

You will need this union for your Tim gauge if you fit a replacement plastic oil pipe part number OL

Extra long cable for Smiths central located speedo when position moved in dash and also used as a Tacho cable for Sprite, 36" long.

2.2 WATTS and fits back of gauges in cars with 3 extra 52mm round clocks.

Screw type bulbs that fit the plugs (AEU1313A) on the round central clock speedos on all minis from 1959 until the introduction of the non Smiths type plastic clocks as used on the first clubmans and 1275GT. Sold individually.

This is the wiring short conversion loom that fits to the old central speedo and is used by people modifying from 2 or 3 clock dashes to single clock or just repairing damaged looms. With the correct bulb holders and spade fittings. Now uses 5x [link...

Standard replacement cable for central located Smiths Mini speedometer.

0-110 centigrade scale with 6 foot capillary mechanical fittings, requires an adaptor TE5 in order to fit the cylinder head.

This original type Smiths tacho will fit positive or negative earth cars if the manufacturers part number has a CA suffix.

chrome pod for housing any of the popular size 80mm tachometers from either Smiths or Tim gauges.

tach pod in black for all the 80mm size tachoc-for chrome see SIB801

If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smith's"! Available in either 8,000 (RVC10...