EXHAUST COOPER S
GEX117

£504.00 exc vat

£604.80 inc vat

In stockIn stock
The original design flare (pinch) shaped silencers on this twin box exhaust system will fit right onto either the original Cooper S exhaust manifold/header or the Cooper Freeflow manifold. In stock for the first time in years!split into 2 parts for ...

£504.00 exc vat

£604.80 inc vat

In stockIn stock

Recommended usage 1 x GEX117 to fit one mini.
Exhaust RC40 1275GT / Cooper S - Qty 1

Recommended products
MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD
C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

£87.45 exc vat

£104.94 inc vat
People also bought products
EXHAUST TAILPIPE TRIM FOR VAN/ESTATE fits 45mm ID
RC40-005

Stainless steel tailpipe trim with hanger bracket designed for fitting to the tailpipe of RC40 rear box as an extension piece. This is part of our RC40PACKAGE015 kit for Van/Estate and Pickup exhaust system when a freeflow o...

£25.44 exc vat

£30.53 inc vat
EXHAUST CENTRE STRAP.SALOON
GEX7082

Exhaust centre strap that hangs from the mounting on the centre of the rear subframe, for saloon models only as the van is longer(GEX7273).

The clip on the exhaust that this attaches to is GEX7052 and is usually on a new exhaust...

£2.42 exc vat

£2.90 inc vat
MANIFOLD LCB SMALL BORE EXHAUST (LM2)
C-STR817

Small bore Maniflow LCB. Has a 1.5" outer diameter 1.375" internal diameter bore size. STD mini exhaust and downpipe size is 1.250".

If the 1.375" tapered end of about 2" is removed a 1.750 pipe will fit over remaining length of outlet pipe.

£117.72 exc vat

£141.26 inc vat
DOWN PIPE RC40 TWINBOX TO FREEFLOW C-STR816 MANIFO...
RC40-001

Original RC40 downpipe. This pipe is the correct length to fit the rear twin box RC40 system to the original Cooper and "S" range of manifolds or the replacement C-STR816 Freeflow manifold. If fitting to an LCB ...

£8.88 exc vat

£10.66 inc vat
MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD
C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

£87.45 exc vat

£104.94 inc vat
EXHAUST TWIN REAR BOX FROM CAT BACK SILENCER
GEX33519

Twin box system from catalyst back for all 1990/1 on.

Originally the systems were all different shapes but Xparts(Rover),Bosal and Klarius have now all made a universal system. Suitable for SPI and MPI cars. This one has stiffener supports o...

£57.60 exc vat

£69.12 inc vat
REAR COTTON REEL EXHAUST MOUNT
GEX7251

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required.

See C-19G3258 for larger upgrade...

£1.05 exc vat

£1.26 inc vat
EXHAUST REAR BRACKET 1275GT & S PLUS RC40 (REAR)
GEX7249

This is the hanger on the rear of the rear subframe for all Coopers and cars with an RC40 exhaust system. The u bolt to fix this to the exhaust is GEX9007.

All the parts to hang RC40 exhausts systems are available i...

£1.55 exc vat

£1.86 inc vat
WASHER FOR MANIFOLD THICK TYPE
12A1211

The intake/exhaust manifold should be secured to the head with brass nuts and these very thick washers. These washers are intended to not only spread the clamping action but the thickness allows them to absorb the heat without deforming! Takes 4 per ...

£0.34 exc vat

£0.41 inc vat
MANIFLOW LCB ADAPTOR FOR FREEFLOW MANIFOLD
L71

This short pipe fits on the end of our freeflow manifols C-STR816 to give the overall length of an LCB when you have an exhaust system to fit that was made explicitly for LCB fitment.Total length is 300mm ID is 44mm OD is 48mm.

£6.66 exc vat

£7.99 inc vat
RC40 EXHAUST FITTING KIT
RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

£6.85 exc vat

£8.22 inc vat
EXHAUST HANGER CENTRE S AND RC40 (MIDDLE)
GEX7248

This is the hanger on the front of the rear subframe for all Coopers and cars with an RC40 exhaust system. The u bolt to fix this to the exhaust is GEX9008.

All the parts to hang RC40 exhausts systems are available ...

£1.74 exc vat

£2.09 inc vat
MANIFOLD Y PIECE FOR C-AEG365 LCB L61
C-AHT197

"Y" Piece for LCB Manifold LCB C-AEG365

Comes with clamps to manifold

£38.43 exc vat

£46.12 inc vat
MANIFOLD NUT SHORT BRASS 5/16" UNF
GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

£0.45 exc vat

£0.54 inc vat