GEARLEVER RETENTION SPRING
22G286

(¥9) £8.82 exc vat

(¥11) £10.58 inc vat

In stockIn stock
This is the spring for the anti sizzle gearstick fitted to cars with remote gearboxes from 1964-1973.



Fits under the metal cup 22G290 and provides tension to the 22G292 plastic collar that presses onto the gearlever.


(¥9) £8.82 exc vat

(¥11) £10.58 inc vat

In stockIn stock

Recommended usage 1 x 22G286 to fit one mini.
Gear Change Up to 1972 Not Rod Change - Qty 1

People also bought products
GEAR LEVER BUSH FLANGE
22G292

(¥6) £5.63 exc vat

(¥7) £6.76 inc vat
SPRING FOR GEARLEVER ANTI RATTLE PRE ROD CHANGE
AEG3123

Does your gearshift lever transmits a lot of rattle and noise,

replacing this tiny but significant parts will likely cure it. The kit for the Spridget or Minor consists of the brass plunger (22A84) and spring (AEG3123) The cup (2A3467) unde...

(¥0) £0.48 exc vat

(¥1) £0.58 inc vat
DIFF OUTPUT SHAFT OIL SEAL IN VITON
ADU5738VITON

Upgraded Viton version of ADU5738. Drive shaft oil seal or diff output shaft oil seal for all Mini's except Cooper S and early Automatics. 2 required per gearbox.

(¥3) £3.23 exc vat

(¥4) £3.88 inc vat
GEAR LEVER BUSH
22G389

The plastic bush at the base of the gear lever stalk ON REMOTE TYPE GEARBOXES ONLY--stops that rattling noise



fit to the gearlever, not the knuckle joint, if it falls of the gear lever there will be a lot of play

(¥4) £3.50 exc vat

(¥4) £4.20 inc vat
REMOTE HOUSING SHORT BOLT 3/8" x 1" UNC
GFK5240

Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.

Also the bolt to hold the starter motor.

Also the bolt for the [...

(¥0) £0.32 exc vat

(¥0) £0.38 inc vat
ANTI RATTLE BRASS PLUNGER FOR REMOTE GEARBOX
22A84

If your gearshift lever transmits a lot of rattle and noise, replacing these three tiny but significant parts will likely cure it. The kit for the Spridget or Minor consists of the brass plunger (22A84) and spring (AEG3123) plus the nylo...

(¥2) £2.05 exc vat

(¥2) £2.46 inc vat
SUMPGUARD MONTY/SCOTTISH ALLOY TYPE
C-AJJ3320

Mini Spares copy of the RAC/ Scottish works type-For serious off-road and rough stages, the only type to fit is the rounded sledge type front version, which helps ride the car over potentially damaging foreign bodies. Extra strengthening bar fits int...

(¥109) £108.90 exc vat

(¥131) £130.68 inc vat
GEARBOX ROD CHANGE ANTI OIL LEAK SEAL KIT
MSSK050

This kit consists of one alloy sleeve with a groove on the outside to locate the O ring, the new "O" ring, a rod seal and a gaiter. To fit the kit simply remove the old gaiter if fitted and then the old oil seal. Fit the sleeve with the "O" ring fitt...

(¥5) £4.75 exc vat

(¥6) £5.70 inc vat
ROD CHANGE GEARCHANGE OIL SEAL
AHU1672

A part that is historically known to fail over a period of time, due to contamination from road grit etc. Please also see part number MSSK050 for our modification kit to prevent future failures.

(¥1) £0.99 exc vat

(¥1) £1.19 inc vat
GEARBOX EXTENSION REAR MOUNT (REMOTE)
21A956

This mounting fits on the end of the remote control housing of pre rod change cars. The metal bracket that it secures to is 21A745.

(¥3) £3.02 exc vat

(¥4) £3.62 inc vat
QUICKSHIFT GEARLEVER - ROD CHANGE
C-22A1751

Quick-shift kit for Rod Change shifters. (See C-22A1750 for remote shifters.)

By raising the pivot point on the shift lever, the amount of throw is reduced considerably. That means you get shorter, quicker shifts! Parts includ...

(¥40) £39.50 exc vat

(¥47) £47.40 inc vat