Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.

these are the special spacer type bolt that are in the BG4001 kit. they screw on the original stud to give the extension

Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. Just under 1/8" PER WHEEL

Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub on the inside. Spacers are sold by the pair, and include 8 longer wheel studs. These are the largest spacers that will ...

Plain spun ally centre cap for the original 10" steel wella wheel. 63mm rear fitting cap, 45MM DEEP with logo face of 45mm.

white sticker for fitting black centre caps which then make this look bolder, as fitted to Monte Carlo and Mini 35SE.

Vehicle centre caps and winged bonnet badge emblems chart from 1990 on

Black plastic cap Sticker 50mm Model
...

Chrome wheel nut for all original Mamba and Revolution wheels except 13".



Overall length is 48mm

Sleeve length is 32mm

Sleeve diameter is 13.8mm

The washer is 2.3mm thick and outside diameter is 24mm

Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.

Stainless steel sleeve nut with tapered washer.



5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.

The best reason for buying our wheels is that spare ...

These fit our Minispares range of 4.5x10" and 5x12 ST wheels that have sleeve type nut and chamfered washer with the exception being C-21A1021 and WHEEL1000/1001. These also fit most of the old original Minilites from Tech Del before the...