(¥4) £4.32 exc vat
(¥5) £5.18 inc vat
In stock
(¥4) £4.32 exc vat
(¥5) £5.18 inc vat
In stockRecommended usage 1 x LMA048 to fit one mini.
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...
Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.
Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.
Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.
Oil gauge adaptor for fitting into engine block or T piece.
A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.
You will need this union for your Tim gauge if you fit a replacement plastic oil pipe part number OL
Extra long cable for Smiths central located speedo when position moved in dash and also used as a Tacho cable for Sprite, 36" long.
2.2 WATTS and fits back of gauges in cars with 3 extra 52mm round clocks.
This is the wiring short conversion loom that fits to the old central speedo and is used by people modifying from 2 or 3 clock dashes to single clock or just repairing damaged looms. With the correct bulb holders and spade fittings. Now uses 5x [link...
Standard replacement cable for central located Smiths Mini speedometer.
Simply a plastic pipe for those with a turbo boost valve on Turbo engines.
chrome pod for housing any of the popular size 80mm tachometers from either Smiths or Tim gauges.
tach pod in black for all the 80mm size tachoc-for chrome see SIB801
Straight union as fitted to Coopers which had a mechanical reading oil pressure gauge. This is the union that screwed into the block. The alternative is to fit the T piece (part No TP) which will take an oil switch and the oil pipe when ...
This is not the longest of the speedo cables made to fit the 2 or 3 cluster clocks mounted in front of the driver.Fited as standard from 1990 on cars . the L/H/D equivalent only used a short 29" long cable GSD488.
Pre 1990 cars were fitted w...
This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).
Smaller 52mm face and reading 0-80 x100---If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "S...
90mph black speedo clock for 3.4 final drive 10" wheels centre clock type.
We can get these available to order but most customers buy the 13H4442 which is the same but with 130mph face.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.