(¥35) £35.10 exc vat
(¥42) £42.12 inc vat
In stock
(¥35) £35.10 exc vat
(¥42) £42.12 inc vat
In stockRecommended usage 1 x TIM015 to fit one mini.
A union to fit the sump plug hole to accept Smiths oil temperature gauges, but will only take the small capillary type bulb as used on very early and current smiths oil temp gauges, does not fit the larger capillary fitted to some smiths gauges unles...
Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting on Pre 1992 Blocks.
oil temperature gauge in magnolia.
If fitting MOCOT2 you will need TE5 adaptor.
Although the twin point minis had this type of gauge it worked electronically
which is not very accurate for performance engines. This one howe...
Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. For post 1964 vehicles with voltage stabiliser fitted on speedo.
The early type had 3 connector tabs on one long brass strip for wires where as thi...
Mechanical movement with 57" long capillary tubing and has 40-120 degree centigrade calibration.
Recomended to use a TE5 adaptor.
0-110 centigrade scale with 6 foot capillary mechanical fittings, requires an adaptor TE5 in order to fit the cylinder head.
Electrically operated gauge with 40-120 centigrade reading for negative earth cars only. Comes complete with sensor and relevant adaptors to fit the cylinder head.
A union to fit the sump plug hole to accept Smiths oil temperature gauges, but will only take the small capillary type bulb as used on very early and current smiths oil temp gauges, does not fit the larger capillary fitted to some smiths gauges unles...
This is the temperature sender for the oil temperature gauge 1996 onwards(MPI, twin point)only. NOT automatic.
The original unit has now been discontinued from Xpart, but Mini Spares now offer a modification kit using a different ...
Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:
*Trip and total miles
*Remote trip reset
*Driv...
This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...
We sell about 20 of these per year and many are used on similar models to those indicated-Main and dash loom only--No side wing indicators-indicator stalk on right-alternator-rear lamps with reverse lights-steering lock-inertia starter-centre speedo ...
Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.
Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.
Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.
Oil gauge adaptor for fitting into engine block or T piece.
A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.
Speedometer cable, 30" long for Smiths type central speedo-original was 26" long
You will need this union for your Tim gauge if you fit a replacement plastic oil pipe part number OL
Oil pressure is the "blood pressure" of your engine! Know how it is doing and you know how your engine is doing. This Smith's gauge is the standard 2" diameter with chrome bezel. With a magnolia face. Mechanical.
Does not come with pipewor...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.