BONNET SAFETY CATCH HOOK-ALL MINIS
14A366

($17.00) £17.00 exc vat

($20.40) £20.40 inc vat

In stockIn stock
This is the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while driving should the latch either fail or not close completely. The catch is simply pinned to the bracket that is part of the bonnet located on the right front corner.

This part is available built up in bracket as ALA7608 for the mini but the clubman bracket is supplied on the bonnet.

($17.00) £17.00 exc vat

($20.40) £20.40 inc vat

In stockIn stock

Recommended usage 1 x 14A366 to fit one mini.
Bonnet and Catches - Qty 1

Recommended products
BONNET HOOK CLEVIS PIN
4B8769

This is the Clevis pin for the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while dri...

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat
Alternative products
BONNET SAFETY CATCH
ALA7608

this part is usually supplied on a new bonnet and very rarely needs changing

but if you are unlucky this is a genuine replacement part that will need to be welded on-if you just require the hook part because the spring has gone see [link]14A...

($27.00) £27.00 exc vat

($32.40) £32.40 inc vat
People also bought products
MINI SALOON BONNET PIN AND FITTINGS
14A6586KIT

($17.74) £17.74 exc vat

($21.29) £21.29 inc vat
MK1 BONNET SLIDER INCLUDING VAN AND PICKUP
14A6493

early slider catch for Mk1 pre mk2 which used ALA6992.

($27.75) £27.75 exc vat

($33.30) £33.30 inc vat
BONNET PROP BRACKET FOR ALL INJECTION MODELS
ASU360120

($7.20) £7.20 exc vat

($8.64) £8.64 inc vat
BONNET HINGE PAIR for MK3 MINIS on
HMP441027

A pair of bonnet hinges for mk3 saloons after 1971 unpainted

($33.15) £33.15 exc vat

($39.78) £39.78 inc vat
BONNET HOOKS (LARGE) RUBBER
MS118

If you want to hold it in place then this is easy and simple. 4" long rubber hooks can be used on bonnet and/or boot lid. Packaged in pairs with both brackets.

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat
PLASTIC CLIP FOR BONNET PROP AND SUNVISORS ON 64/6...
GFK7344

Plastic clip for sunvisor 1964-5 and some bonnet props on early cars,was GHF1120 and ADA4370. the side clip on these models was ADA4484.

this set up was used with first plastic mirrrors and black rubber...

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat
BLACK LEATHER BONNET STRAPS-PAIR ONLY
MS121

Leather Bonnet Straps.

Black leather bonnet straps, sold in pairs and at a very cost effective price. These straps are great and can be used for everything from the bonnet to the tool box.

($8.48) £8.48 exc vat

($10.18) £10.18 inc vat
OVERCENTRE CLIP SPRING LOADED
MS117

Ideal for lashing down your tilt-front Bugeye nose! They latach and release quickly without tools. Strong enough to hold down panels even at racing speeds!

($8.40) £8.40 exc vat

($10.08) £10.08 inc vat
BONNET RELEASE CABLE
FSE10020

Bonnet locking cable fitted as standard on all Twin point injection minis plus other models from 1992/3. This cable is in our kit GS130273 to fit all minis as an accessory.

($12.16) £12.16 exc vat

($14.59) £14.59 inc vat
BONNET PROP RUBBER
2H9215

Black rubber bung to hold the bonnet prop in place on MK1/2 minis.

Also the same profile and shape as the rear boot board buffers but nearly twice the length at 1.5"(38.3mm).

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat
BONNET SPRING FOR CLUBMAN THIMBLE PIN
4G1588

the clubman had a longer and wider spring for the bonnet release thimble

3.25"long and 1.5" wide

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat
QUICK RELEASE BONNET HINGE PR MK3 ONWARDS
MSSK019

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

($41.23) £41.23 exc vat

($49.48) £49.48 inc vat
BONNET PROP ROD
BKD360030

Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...

($8.50) £8.50 exc vat

($10.20) £10.20 inc vat
CLUBMAN BONNET BUFFER
AAU5486A

BONNET BUFFER, 1500.

($1.47) £1.47 exc vat

($1.76) £1.76 inc vat
BONNET STRAP TAN ORIGINAL WORKS TYPE-SINGLE STRAP
C-AJJ3381

This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. Original light colour Tan leather

3.3mm thick from the tanneries for use on horse bridles, with alloy fastening. Screws ...

($13.65) £13.65 exc vat

($16.38) £16.38 inc vat
BONNET LOCK THIMBLE CLUBMAN TYPE ONLY
4G3676

This will only fit the clubman models and not standard minis

($4.39) £4.39 exc vat

($5.27) £5.27 inc vat
BONNET PROP SPRING TYPE
MSSK018

bolts to an existing hinge and is spring loaded to act as an auxiliary bonnet prop

($10.40) £10.40 exc vat

($12.48) £12.48 inc vat
BONNET PINS - RED
BSP003

Heavy duty bonnet pin kit, contains a pair of pins AND all the mounting hardware.

($9.92) £9.92 exc vat

($11.90) £11.90 inc vat
LOCKABLE BONNET PINS
C402

For competition use these pins are the only sure way of holding your bonnet down in place

($13.84) £13.84 exc vat

($16.61) £16.61 inc vat
HEAVY DUTY BONNET PINS
C247

These heavy duty bonnet pins 4" long and 1/2" thick are favoured by competition car owners to stop the bonnet accidentally coming up. They will require drilling holes in your bonnet and sold in pairs only.

($8.40) £8.40 exc vat

($10.08) £10.08 inc vat