CRANK PULLEY BOLT EARLY
AEA312

($11.20) £11.20 exc vat

($13.44) £13.44 inc vat

In stockIn stock
Bolt for the crank pulley on early cars 1963-87 with 0.50"thread on 0.75" length with chamfered edge leading to nut end, fitted all non damper type crank pulley and S split type damper pulley AEG454 plus pre A plus---for A plus see TAM2019 which was 0.75"less the longer chamfered area.

We tried every known crank and came up with the longest thread possible on our

extra strong C-AHT147 bolt and washer kit

($11.20) £11.20 exc vat

($13.44) £13.44 inc vat

In stockIn stock

Recommended usage 1 x AEA312 to fit one mini.
Water Pump, Pulleys & Ancillaries - Qty 1

Alternative products
CRANK BOLT LONG CAPHEAD WITH AND SPECIAL WASHER
C-AHT147

A series mini engine crank pulley bolts have been known to come loose, caused by pulley damper vibration on competition engines. This is a high tensile longer extended thread cap head bolt with thick washer to rectify this problem and also allow furt...

($8.91) £8.91 exc vat

($10.69) £10.69 inc vat
People also bought products
VICTOR REINZ SMALL BORE HEAD GASKET
GUG702506VR

Victor Reinz/Mahle small bore head gasket for A-series engines.



Gasket fitment. Writing side up.

($10.40) £10.40 exc vat

($12.48) £12.48 inc vat
PRE A+ TIMING GEAR FRONT PLATE (NON TENSIONER TYPE...
AEG161

Genuine Mini Spares engine front plate for pre A+ plus timing gear.



this fits engines using the early egg shaped cover



This plate has been modified by counter sinking the 2 main cap bolt holes to accept countersu...

($24.75) £24.75 exc vat

($29.70) £29.70 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
ROCKER ADJUSTING NUT EN24T
C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

($2.64) £2.64 exc vat

($3.17) £3.17 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS
C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
LOWER POLY STABILISER BUSH KIT
C-STR633

Stabiliser bush kit for lower engine steady

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat
ARP 11 STUD HEAD SET
C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE
C-AEM91886-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat
BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE
C-AEB91306-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($69.06) £69.06 exc vat

($82.87) £82.87 inc vat
BIG ENDS +10 998/1098/970/1071/ COOPER "S" ACL RAC...
C-AEB572-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($66.27) £66.27 exc vat

($79.52) £79.52 inc vat
VACUUM UNIT 25D FOR MODERN DAY FUELS
37H3840MS

For those very early 25D type distributors.Mini Spares version for modern fuels as fitted to our distributor range with slide on vaccum hose inlet pipe-not the very first screw in type

($13.20) £13.20 exc vat

($15.84) £15.84 inc vat
PRESSURE PLATE SUPERLIGHT RACE ONLY
C-AHT230EVO

Billet steel CNC machined ultralight race backplate for pre verto clutches, weighs just 0.87kg.

($152.25) £152.25 exc vat

($182.70) £182.70 inc vat
SUPER WATER PUMP LESS BY PASS-3 YEAR GUARANTEE-PRE...
GWP187EVO

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

($18.75) £18.75 exc vat

($22.50) £22.50 inc vat
SUPER WATER PUMP LARGE IMPELLER WITH BYPASS
GWP134EVO

3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impe...

($18.75) £18.75 exc vat

($22.50) £22.50 inc vat
DISTRIBUTOR PRE A PLUS ELECTRONIC 1275cc NEG EARTH...
12G4180MS

Negative earth only-45D electronic distributor with vac for 1275GT and any pre A Plus 1300cc engine including Sprite and Midget in line engines-

For best performance and tune we advise our electronic Evolution version C-27H7698<...

($57.00) £57.00 exc vat

($68.40) £68.40 inc vat
DUPLEX STEEL GEARS WITH EVO CHAIN
C-AJJ3325EVO

Ultra light non-adjustable steel duplex timing gear and chain set with locktab and countersunk screws but with a 2H4905EVO limited stretch race quality chain.

If you are working on your engine and you want to do it right then yo...

($71.34) £71.34 exc vat

($85.61) £85.61 inc vat
VALVE COTTER SINGLE GROOVE COMPETITION (1 UNIT=2 H...
88G459EVO

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat