BONNET STRAP BLACK ORIGINAL WORKS TYPE-SINGLE
C-AJJ3380

($13.65) £13.65 exc vat

($16.38) £16.38 inc vat

In stockIn stock
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.

3.3mm thick from the tanneries for use on horse bridles,wit...

($13.65) £13.65 exc vat

($16.38) £16.38 inc vat

In stockIn stock

Recommended usage 2 x C-AJJ3380 to fit one mini.

Alternative products
BONNET STRAP TAN ORIGINAL WORKS TYPE-SINGLE STRAP
C-AJJ3381

This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. Original light colour Tan leather

3.3mm thick from the tanneries for use on horse bridles, with alloy fastening. Screws ...

($13.65) £13.65 exc vat

($16.38) £16.38 inc vat
BLACK LEATHER BONNET STRAPS-PAIR ONLY
MS121

Leather Bonnet Straps.

Black leather bonnet straps, sold in pairs and at a very cost effective price. These straps are great and can be used for everything from the bonnet to the tool box.

($8.48) £8.48 exc vat

($10.18) £10.18 inc vat
People also bought products
MINI BOOT CABLE FITTING KIT INCLUDING SPACERS
14A6740FK

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
RIVET CLIP UPPER DOOR MOULDING (BOTTOM)
13H744

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat
MK1 BONNET SLIDER INCLUDING VAN AND PICKUP
14A6493

early slider catch for Mk1 pre mk2 which used ALA6992.

($27.75) £27.75 exc vat

($33.30) £33.30 inc vat
BLACK DELUX MOULDED SILL TRIM
GZF108A

Fluted type equivalent of GZF105A. This is equivalent

design of CZH4316 which was fitted between mini special black arches. Sold per side.

($9.84) £9.84 exc vat

($11.81) £11.81 inc vat
Mk1 WIPER MOTOR MOUNTS (THREE REQUIRED)
17H5431

Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat
BONNET HOOK SLAM PLATE ON FRONT PANEL STAINLESS ST...
ALR1441SS

For MPI only when bonnet hook has been moved to central position.



This plate protects the bonnet lander panel from the hook and acts as a stiffener also. Stainless steel version.

($5.93) £5.93 exc vat

($7.12) £7.12 inc vat
BONNET LOCK PLATE STAINLESS STEEL
AAM1223SS

This is the guide plate for the bonnet locking pin, now in stainless steel.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
BONNET HOOK CLEVIS PIN
4B8769

This is the Clevis pin for the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken. The spring loaded catch is designed to keep the bonnet from blowing open while dri...

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat
WHEEL ARCH FIXING KIT FOR MS127 MINI MIGLIA ARCHES
MS127FK

Wheel arch fitting kit for MS127 Mini Miglia arches.

($14.81) £14.81 exc vat

($17.77) £17.77 inc vat
MINI MIGLIA WHEEL ARCHES
MS127

Curley fibre glass Mini Miglia wheel arches, approximately 4.8." wide, with front edge 6.9" at widest point. Requires MS127FK brackets. Probably the largest wheel arches used on minis. Please note these are white gel coat not black and w...

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat
WHEEL ARCH SET GROUP 2 PREMIUM BLACK
C-AJJ3316BLACK

Group 2 fibre glass wheel arches in premium black finish not requiring paint, judged the best on the market available by our customers, they stick out 1.75" including lip, when bodylines (wheel arch and moulding lip) are kept original. Screws are vis...

($85.50) £85.50 exc vat

($102.60) £102.60 inc vat
WINDSCREEN WASHER JET Mk1/2 original shape
GWW807

Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
BARREL LOCK SET FOR PUSH BUTTON TYPE DOOR HANDLES ...
BARRELSET

Key barrel set for Mk3 onwards door handles and boot handles.

($19.22) £19.22 exc vat

($23.06) £23.06 inc vat
BOOT BOARD BRACKETS FOR 7.5 GALLON TANK 165 TYRES
CCC115C

This kit contains all the floor brackets and mounts required for fitting Minis with 7.5 gallon tank 10/12" wheels or with 165 profile tyres.

The boot board bracket 14A9783 is not included

For 10" wheels with 145 tyres ...

($39.73) £39.73 exc vat

($47.68) £47.68 inc vat
BOOT BOARD BRACKET CENTRE FOR 165 TYRE
14A9786

Taller centre boot board bracket for when wider 165 tyres are fitted to the spare wheel. Supplied with the rubber and pin.

($8.93) £8.93 exc vat

($10.72) £10.72 inc vat
BOOT BOARD BRACKETS FOR 7.5 GALLON TANK 145 TYRES
CCC115B

This kit contains all the brackets and mounts required for fitting Minis with 10/12" wheels or with 145 profile tyres.

The boot board bracket 14A9783 is not included

For 10" wheels with 145 tyres and 5.5 gallon tank se...

($39.44) £39.44 exc vat

($47.33) £47.33 inc vat
BOOT BOARD BRACKET SET 5.5 gallon tank 165 tyre
CCC115A

This kit contains all the brackets and mounts required for fitting Minis with 10" 165 tyres.

The boot board bracket 14A9783 is not included

For 10" wheels with 145 tyres see CCC115

For use with boo...

($39.56) £39.56 exc vat

($47.47) £47.47 inc vat
BONNET AND BULKHEAD INSULATION PAD MK3 ON (PVC COA...
CK975A

Tough PVC sound proofing for the Bonnet and Bulkhead for all 1970 onwards mini's. Supplied with heat resistant glue for the bonnet pad

($55.50) £55.50 exc vat

($66.60) £66.60 inc vat
BONNET REAR GUTTER SEAL SPONGE PRE1991
14A9010MS

Called the rear bonnet seal it actually sits in the windscreen front scuttle panel on all minis up to 1991. This is the shape and size neoprene foam seal that we have found works best and has an adhesive backing to make fitting easier and less messy.

($3.25) £3.25 exc vat

($3.90) £3.90 inc vat
ROOF MOULDING CLIP IN STAINLESS STEEL
DBE10006S

Roof gutter trim clip in stainless steel, ideal finishing item for our MT632 roof gutter trim.

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat