CON ROD BOLT 1300 EXCEPT "S" GENUINE
LFH10006

($3.90) £3.90 exc vat

($4.68) £4.68 inc vat

In stockIn stock
Genuine part on sale at less than half price.

Most engine builders will tell you to replace the rod bolts as often as you can afford, but at least every other time you do the bottom end. If you don't know the last time, replace them. The LFH10006 bolt fits all 1275 motors, including Austin America and A-Plus, except the "S". Sold individually.

THREAD SIZE 11/32 diameter 24TPI.

($3.90) £3.90 exc vat

($4.68) £4.68 inc vat

In stockIn stock

Recommended usage 8 x LFH10006 to fit one mini.
Pre A Plus 1275 with 12H Eng No Except Cooper S - Qty 1
A Plus Blocks 1275 Engines with 12H Engine No - Qty 8
Engine and Block 1275cc - Qty 8

Recommended products
CON ROD NUT 1275cc
CAM6263

Multipoint, shouldered big end nut for 1300cc rod bolts; (not Coooper S)

designed to give better clamp-down as used on MPI but now obsolete from Rover but [linkC-STR290[/link] are available or earlier Pre A plus type [link]13H5872[/link] are also available and can be used.

($1.90) £1.90 exc vat

($2.28) £2.28 inc vat
Alternative products
CON ROD BOLT SET 1275cc NOT "S" ARP NUT/BOLT SET
C-STR289

These con rod bolt and nut set are made by ARP in the USA and considered the best available FITS 1300 con rods plus MGB late 18V engine numbers with 11-32" bolts. Quantity required one kit per car. torque up to 38-40lb ft.

($120.00) £120.00 exc vat

($144.00) £144.00 inc vat
People also bought products
GEARBOX TO BLOCK STEPPED WASHER FOR CORNER BOLT
22A1150

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
VICTOR REINZ LARGE BORE HEAD GASKET
GUG702560VR

Victor Reinz large bore head gasket for A-series engines.

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
VALVE SPRING SEATS SHIMS 0.020"(set of 4)
SS1

Spring seat shims (set of 4), 0.020" thick (0.5mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT...

($6.90) £6.90 exc vat

($8.28) £8.28 inc vat
VALVE SPRING SEATS SHIMS 0.040" (set of 4)
SS5

Spring seat shims (set of 4), 0.040" thick (1mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT36...

($7.59) £7.59 exc vat

($9.11) £9.11 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
ROCKER ADJUSTING NUT EN24T
C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

($2.64) £2.64 exc vat

($3.17) £3.17 inc vat
PUROLATER FILTER BOWL TO HEAD SEAL
12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20
C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat
SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60
C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat
REPLACEMENT SEAL O-RING FOR MSA1134. MSA1124/5 DIP...
TRS1316

Replacement O ring for the Minispares range of chrome dipticks

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat
HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS
C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
LOWER POLY STABILISER BUSH KIT
C-STR633

Stabiliser bush kit for lower engine steady

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat
CRANK THRUST WASHER SET +0.30" 1275
ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
CRANK THRUST WASHER SET +0.003" 1275
ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
ARP 11 STUD HEAD SET
C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
MAINS +10 1275CC A PLUS ONLY ACL RACE
C-AEM91886-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat
MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE
C-AEM91886-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat