SLIDING WINDOW CATCH LOCKING RUNNER L/H

For mini's with sliding windows on the front doors, these are the runners that hold the channel and have holes to lock the window catches. Now made in stainless steel by Minispares to ease rust problems.

Also see 24A1303 for R/...

($20.00) £20.00 exc vat

($24.00) £24.00 inc vat

SELF TAPPING COUNTERSUNK SCREW 6x1/2" FOR 24A88

GHF400

Correct size self tapper screw for 24A88 lower sliding window channel when door holes have not rusted out to larger size.

($0.07) £0.07 exc vat

($0.08) £0.08 inc vat

WEATHERSTRIP KIT MSSK021 PLUS 24A1304 L/H

MSSK023

Sliding window type weatherstrip kit L/H.

Kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with...

($59.28) £59.28 exc vat

($71.14) £71.14 inc vat

DOOR CHANNEL UPPER MOULDING MK1/2 SLIDING WINDOWS

14A7167

Genuine Mini Spares product-Upper window channel for MK1/2 Minis. When replaced in conjunction with part # 24A88, the windows fit nice and tight, there are no rattles and the glass does not fly forward when you hit the brakes. Just like new.

($11.09) £11.09 exc vat

($13.31) £13.31 inc vat

DRAUGHT EXCLUDER L/H FRONT DOOR GLASS MK1/2

EAM8531

Draft excluder for sliding window doors as fitted to Mk1/2 Minis and vans.

Left hand side..Either crimp both ends with your fingers to make it stay on door glass or use a glue as per the factory on later vans. QTY one per door. Angled cut a...

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat

DOOR CHANNEL LOWER SLIDING WINDOW RUNNER MK1/2

24A88

Genuine Mini Spares product-These are copies of the original solid type, with stronger reinforced internal wire and with the holes for drainage and securing.

These fit either side door where the holes line up on the window catch moulding. C...

($20.80) £20.80 exc vat

($24.96) £24.96 inc vat

MK1 DOOR STRIKER AND GUIDE KIT

MSSK066

($42.00) £42.00 exc vat

($50.40) £50.40 inc vat

SLIDING WINDOW CATCH SET METAL

MSSK015METAL

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.

Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

($255.00) £255.00 exc vat

($306.00) £306.00 inc vat

DOOR CHECK STRAP MK III ONWARDS NON GENUINE

ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

SQUARE DOOR STRIKER GASKET

FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat

MK 1/2 EXTERNAL HINGE ANGLED SPACER

14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2

24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

($120.00) £120.00 exc vat

($144.00) £144.00 inc vat

VAN REAR HINGE GASKET

ALA8465

Van, Clubman Estate, Traveller and Countryman rear door hinge gasket. (sold individually)

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat

DOOR SEAL UPPER L/H TWIN POINT CARS 1996on

CFB101130

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim, fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

($16.50) £16.50 exc vat

($19.80) £19.80 inc vat

DOOR SEAL LOWER L/H TWIN POINT CARS 1996on

CFB101090

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat

DOOR SEAL LOWER R/H TWIN POINT CARS 1996on

CFB101080

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat

WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME

24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat

DOOR MOULDING WEATHERSTRIP KIT INNER AND OUTER WIT...

MSSK2104

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

($56.28) £56.28 exc vat

($67.54) £67.54 inc vat

WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H

MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

($60.08) £60.08 exc vat

($72.10) £72.10 inc vat

DOOR MOULDING & POP RIVETS MK3 L/H

MS68

The Cooper S had these mouldings and this is the same item but made for the MK3 wind up window cars. These are easy to install, drill 1/8" holes evenly spaced on the straight edges,3 each side and 4 at the top(not on any corners)of the window frame.T...

($44.29) £44.29 exc vat

($53.15) £53.15 inc vat

CHECK ARM SEAL L/H 1986 ON

CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

CHECK ARM SEAL R/H 1986 ON

CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

DOOR WINDOW REGULATOR SCREW 1/4"

SE604031

Holds the window regulator to the door on wind up window minis from 1970 on.

Also holds fog lamp bracket to rear valance. 1/4" unf with 1/2" thread on

panhead type screw.

($0.42) £0.42 exc vat

($0.50) £0.50 inc vat

DOOR UPPER WINDOW GLASS SEAL R/H GENUINE MINISPARE...

PAM3076

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the R/H upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.

($12.54) £12.54 exc vat

($15.05) £15.05 inc vat

DOOR UPPER WINDOW GLASS SEAL L/H GENUINE MINISPARE...

PAM3077

Genuine MK3 wind-up window upper slide up and down felt lined channel that fits into the upper door frame. Left (PAM3077) and right (PAM3076) look identical but are mirror images.If you are looking for a cheaper budget version see PAM3077MS

...

($12.54) £12.54 exc vat

($15.05) £15.05 inc vat