HEEL BOARD PIPE TAG TAB

Clip on heelboard for pipes-2 fitted on all models until SPI 1991 onwards which had one onlyMS51heel board panel has 2 fitted and HMP441008 has one only.

($1.20) £1.20 exc vat

($1.44) £1.44 inc vat

FRONT FLOOR PAN CLIP FOR FUEL AND BRAKE PIPE TAB T...

ALA5527

Clip under front floor fitted to 1990 for holding fuel/ brake lines (2 per car)

located beside floor pan footwell and tunnel

($5.00) £5.00 exc vat

($6.00) £6.00 inc vat

UNDER FLOOR CLIP FOR FUEL AND BRAKE PIPE TAG TAB

ALA5536

Clip for underside of front floor(3 per side) 6 in total fitted to 90

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat

CLIP FOR 14A8009 MOULDING

14A8010

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

($1.22) £1.22 exc vat

($1.46) £1.46 inc vat

PLASTIC NUT FOR FUEL LINE PROTECTOR AND CAT HEATSH...

EYH10001

This is the small plastic nut used to hold the fuel line protector shield on later cars, also used to hold the catalytic converter heat shield on, 4 required for each shield.

($1.07) £1.07 exc vat

($1.28) £1.28 inc vat

SCRIVET FOR SPORTSPACK WHEEL ARCHES

AWR2227A

The scrivet for holding the front of the rear wheel Sportspack arch and the rear of the front arch. Rover also used rivet RY612535 as an alternative.

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat

PLASTIC CLIP FOR BONNET PROP AND SUNVISORS ON 64/6...

GFK7344

Plastic clip for sunvisor 1964-5 and some bonnet props on early cars,was GHF1120 and ADA4370. the side clip on these models was ADA4484.

this set up was used with first plastic mirrrors and black rubber...

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat

OVERCENTRE CLIP SPRING LOADED

MS117

Ideal for lashing down your tilt-front Bugeye nose! They latach and release quickly without tools. Strong enough to hold down panels even at racing speeds!

($8.40) £8.40 exc vat

($10.08) £10.08 inc vat

WIPER WHEEL BOX BUSH MK3 KIT INNER &OUTER(CUT INNE...

37H7201MS

Black bushes for wiper wheelboxes. Sold as a wiper wheel box set(one above the windscreen scuttle cowl and one under the cowl), takes two sets per car.

To fit early Mk1/2 cars cut down the part that fits under the panel work part(this part h...

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat

MK1 CHROME LOWER DOOR MOULDING CLIP

13H525

One of the distinguishing features of the Cooper S model was the chrome trim around the door windows. If yours is missing or mangled, it can now be replaced

(we won't ask for your car's pedigree if you're adding it to a non S door)!

($1.46) £1.46 exc vat

($1.75) £1.75 inc vat

Bonnet Prop Bracket RH for all pre injection minis

14A7806

This is the bracket on the inner wing to put your bonnet prop into when the bonnet is in the open position.

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat

CLIP FOR CENTRE BINNACLE FINISHER (14 REQUIRED)

14A9796

These are the little 'whisker clips' that hold the 14A9907 bezel on the front of the oval 3-instrument gauge pod 24A2702. The 'ears' slot into the back of the bezel and the tails that stick out go thru one of 14 holes in the...

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat

RIVET FOR STAINLESS UPPER DOOR MOULDING

13H743

One of the distinguishing features of the Cooper S model was the chrome trim around the door windows. If yours is missing or mangled, it can now be replaced

(we won't ask for your car's pedigree if you're adding it to a non S door)! These fi...

($0.93) £0.93 exc vat

($1.12) £1.12 inc vat

MILD STEEL SEAM MOULDING CLIP

BMP128

These are the original Rover Xparts clips that hold on the vertical seam mouldings for all minis, prone to rust this was Rovers upgrade but Mini spares produced a stainless steel version BMP128MS which is also cheaper and a better option...

($0.50) £0.50 exc vat

($0.60) £0.60 inc vat

DOUBLE SPIRE CLIP 10

GHF713

A favourite consumable goods item used for many purposes using no 10 screw, also fits early rad cowlings that use ARA1117 screws.

($0.69) £0.69 exc vat

($0.83) £0.83 inc vat

SEAT TRIM CLIPS WAS 14A4497

GHF1500

Also used for other trim areas this clip holds the vinyl or fabric of the seat covers to the metal framework.This part has larger D shape and claw spikes but if you want the smaller D shape and claws for headlining and rear seat covers see[link]14A80...

($0.15) £0.15 exc vat

($0.18) £0.18 inc vat

BATTERY COVER RUBBER RESTRAINING STRAP

14A7776

Your battery box 5L877 should be held in place by this rubber strap.

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat

MK1 GRILLE MOUSTACHE WHISKER CLIP IN STAINLESS STE...

ADA3583

Moustache whisker clip for MK 1 grille. The end pieces of trim on the MK1 grille moulding known as the moustache. If your MKI whiskers have been gone so long that the clips and rivets are missing. Usually 3 per side fitted, clips sold individually.

($0.56) £0.56 exc vat

($0.67) £0.67 inc vat

DOOR LOCK ACTUATING LEVER CLIP

37H6519

clip that sits on the activating lever on the bottom of the MK3 door handle itself.

New door handles CZH886 and CZH887 have this clip on already.

($1.90) £1.90 exc vat

($2.28) £2.28 inc vat

SEAM MOULDING CLIP

GFK7515

Zinc plated mild steel clip for fixing vertical seam mouldings to the body.

($0.12) £0.12 exc vat

($0.14) £0.14 inc vat