SINGLE PISTON RING SET FOR R43240-60

($21.76) £21.76 exc vat

($26.11) £26.11 inc vat

SINGLE PISTON RING SET FOR R35960-40

08-521711-00

($15.58) £15.58 exc vat

($18.70) £18.70 inc vat

PISTON SET 998 FLAT TOP CIRCLIP TYPE +60 OVERSIZE

ADU3490-60

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980...

($152.00) £152.00 exc vat

($182.40) £182.40 inc vat

PISTON SET 998 FLAT TOP CIRCLIP TYPE +40 OVERSIZE

ADU3490-40

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...

($152.00) £152.00 exc vat

($182.40) £182.40 inc vat

PISTON SINGLE 998cc FLAT TOP PRESS FIT PLUS 40

P22463-40

Available at the moment but they sporadically become unavailable. Mini Spares have also had a batch of plus 60s specially commissioned to us for Grass trackers and racers. sold individually with rings and pin complete.

Ringsets are availabl...

($37.50) £37.50 exc vat

($45.00) £45.00 inc vat

PISTON RING SET 998cc +20 89 ON PRESSFIT

R43240-20

These rings are +20 oversize with 0.59" compression rings and 0.1181" oil ring fo 998cc

($81.60) £81.60 exc vat

($97.92) £97.92 inc vat

PISTON RING SET 998/1100 +060

R32026-60

1.59MM (0.625")COMPRESSION RINGS 3.175mm (1/8")single oil control ring.

also available is a high grade ring set C-STN99-60with 3 piece oil ring

($46.32) £46.32 exc vat

($55.58) £55.58 inc vat

PISTON RINGSET 998 A PLUS +60

R33636-60

3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.AT PLUS 60 OVERSIZE

($57.00) £57.00 exc vat

($68.40) £68.40 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat

TIMING CHAIN SINGLE ROW SPECIAL QUALITY

3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

($22.05) £22.05 exc vat

($26.46) £26.46 inc vat

2° OFFSET WOODRUFF KEY

WKN2OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

3° OFFSET WOODRUFF KEY

WKN3OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

PISTON SINGLE 998 FLAT TOP PLUS 60

P22463-60

These have been specially manufactured for Minispares.

Sold individually with rings and pin complete

these are the preferred pistons of many racers in the 998 class

Ringsets are available as R43240-60

($40.00) £40.00 exc vat

($48.00) £48.00 inc vat

WATER PUMP FITTING KIT FOR GWP187 AND GWP188

GWP187FK

Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat

BIG ENDS PLUS 30 OVERSIZE 998/1100 COOPER S

AEB572-30

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

($22.96) £22.96 exc vat

($27.55) £27.55 inc vat

ORIGINAL TYPE CAM FOLLOWER FOR FAST ROAD USE

2A13EVO

Mini Spares cam follower with original convex bottom Radii as used by BMC/Rover and made by Clanceys but less the oil hole. Using Clancey drawings and to our design for better cam performance and lift we have made the push rod recess deeper for stabi...

($2.88) £2.88 exc vat

($3.46) £3.46 inc vat

CRANK THRUST WASHER SET 1275 30 THOU OVERSIZE

VPW41-030

Set of +.030 thrust washers for 1275.Very useful for machining down when fitting non S cranks in 1275cc block

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat

MAINS 998/1100+20 PRE A PLUS-MAHLE WAS VANDERVELL

VP733-20

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at 20 thou oversize. Early 850 mains were VP592 and 1.185" 30.10mm wide...Quantity required-1 set.

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat

BIG END SET STANDARD 998/1100 & COOPER S

VP572-00

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. Vandervell, once the only bearings to use on a competition motor they are now made by Mahle. ACL is now commonly used in race engines.

($36.75) £36.75 exc vat

($44.10) £44.10 inc vat

MAINS 998/1100+10 PRE A PLUS - MAHLE WAS VANDERVEL

VP733-10

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at 10 thou oversize. Early 850 mains were VP592 and 1.185" 30.10mm wide.

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat

998/1100 MAIN SHELLS PRE A PLUS - MAHLE

VP733-00

Mahle was Vandervell bearings 1.064" 27.05mm wide mains for the late 850cc plus all 997/998/1100cc at standard size. Early 850 mains were VP592 and 1.185" 30.10mm wide..Quantity required-1 set.

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat