Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

($6.85) £6.85 exc vat

($8.22) £8.22 inc vat

DOWN PIPE RC40 TWINBOX TO FREEFLOW C-STR816 MANIFO...

Original RC40 downpipe. This pipe is the correct length to fit the rear twin box RC40 system to the original Cooper and "S" range of manifolds or the replacement C-STR816 Freeflow manifold. If fitting to an LCB ...

($8.88) £8.88 exc vat

($10.66) £10.66 inc vat

TWIN BOX RC40 EXHAUST

RC40

Mini Spares genuine RC40 system has justifiably earned the reputation of the best exhaust ever made for the Mini. Mild steel with stainless steel tailpipe. Typically used with an LCB manifold it gives great performance with a mellow soun...

($60.50) £60.50 exc vat

($72.60) £72.60 inc vat

EXHAUST RC40 CLASSIC EXHAUST MILD STEEL AND FITTIN...

RC40PACKAGE001

Original side exit RC40 Std bore exhaust, LCB short downpipe and fitting kit.

This includes the short downpipe for use with the Long Centre Branch type manifold. Use manifold C-AEG365.

($73.31) £73.31 exc vat

($87.97) £87.97 inc vat

DOWN PIPE RC40 TWINBOX TO FREEFLOW C-STR816 MANIFO...

RC40-001

Original RC40 downpipe. This pipe is the correct length to fit the rear twin box RC40 system to the original Cooper and "S" range of manifolds or the replacement C-STR816 Freeflow manifold. If fitting to an LCB ...

($8.88) £8.88 exc vat

($10.66) £10.66 inc vat

RC40 EXHAUST DOWNPIPE FREEFLOW MANIFOLD TO REAR BO...

AN180V

Copy of the original Cooper single rear box downpipe, this fits our freeflow manifold or can be shortened to fit an LCB when fitting the single rear box C-STR809 RC40 silencer.

A 3" longer version suitable for van/e...

($13.54) £13.54 exc vat

($16.25) £16.25 inc vat

RC40 CLASSIC REAR BOX ONLY

C-STR809

Rear RC40 mild steel silencer with stainless steel tailpipe. Can be used as a single box system with down pipe number AN180V for a little throatier note.

Cars with catalyst use with AN181T for 1275 Coo...

($35.46) £35.46 exc vat

($42.55) £42.55 inc vat

PERFORMANCE STAGE ONE KIT 998 FOR COMMERCIAL VEHIC...

C-STN17V

STAGE 1 KIT FOR MINI VAN, ESTATE AND PICKUP. Mini Spares bolt-on performance kit for 998 and 1098 engines. Gives 20% more power and 12% more torque.

Always get your car rolling road tested for best ignition/timing and emmissions after fitmen...

($255.03) £255.03 exc vat

($306.04) £306.04 inc vat

MANIFOLD CLAMP 1.75" COOPER FREEFLOW WITH TAG FLAT...

C-AHT98

This is the clamp on the cooper freeflow manifold to clamp it to the engine for extra support, supplied with tag.

($4.95) £4.95 exc vat

($5.94) £5.94 inc vat

MANIFOLD STD BORE EXHAUST LONG CENTRE BRANCH (LCB)...

C-AEG365

Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s and for street 1380s.

There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using [lin...

($86.66) £86.66 exc vat

($103.99) £103.99 inc vat

TWIN BOX RC40 EXHAUST

RC40

Mini Spares genuine RC40 system has justifiably earned the reputation of the best exhaust ever made for the Mini. Mild steel with stainless steel tailpipe. Typically used with an LCB manifold it gives great performance with a mellow soun...

($60.50) £60.50 exc vat

($72.60) £72.60 inc vat

MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD

C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

($87.45) £87.45 exc vat

($104.94) £104.94 inc vat

REAR COTTON REEL EXHAUST MOUNT

GEX7251

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required.

See C-19G3258 for larger upgrade...

($1.05) £1.05 exc vat

($1.26) £1.26 inc vat

WASHER FOR MANIFOLD THICK TYPE

12A1211

The intake/exhaust manifold should be secured to the head with brass nuts and these very thick washers. These washers are intended to not only spread the clamping action but the thickness allows them to absorb the heat without deforming! Takes 4 per ...

($0.34) £0.34 exc vat

($0.41) £0.41 inc vat

MANIFOLD CLAMP 1.5" LCB TO ENGINE FLAT TYPE

C-AHT94

This is the clamp for the C-AEG365 manifold that clamps it to the engine for extra support.

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat

MANIFOLD GASKET INLET / EXHAUST

AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

($0.96) £0.96 exc vat

($1.15) £1.15 inc vat

EXHAUST U BOLT CLAMP 1" 7/8" 48mm

GEX9008

Exhaust hanger clamp for 1.875" pipe.

For joining rear box to downpipe on RC40 and downpipe to manifold on RC40.

($0.73) £0.73 exc vat

($0.88) £0.88 inc vat

ALLOY WATER HEATED TORQUEMASTER INLET MANIFOLD HS4...

C-AHT770

Genuine mini Spares inlet manifold dyno tested and designed for our Stage one kit C-STN17. The single SU manifolds is developed to give maximum airflow and gas speed, yet fit all engines even if the standard air cleaner set-up is used. I...

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat

RC40 EXHAUST FITTING KIT

RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

($6.85) £6.85 exc vat

($8.22) £8.22 inc vat

RC40 REAR BOX MILD STEEL CENTRE EXIT LARGE BORE

RC40-012

The popular RC-40 exhaust system has been updated for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuraton. In addition they now have stainless ste...

($100.46) £100.46 exc vat

($120.55) £120.55 inc vat

EXHAUST REAR BRACKET FOR GEX177 ETC

GEX7084

The very rear hanger for mini saloon exhausts pre 1990.

This bracket slides on after the rear silencer and hangs straight up to the cotton reel mounting but never comes on a new exhaust. It is always prone to breaking if the engine rocks bad...

($1.45) £1.45 exc vat

($1.74) £1.74 inc vat

MANIFOLD STUD 6MM LONGER THAN 53K487 APPROX 1990 O...

LYR10028

Manifold stud for all A series injection engines and some late carburettor cars which is 45mm long-6mm longer than 53K487.carburettor engines usually retained the 53K487 shorter screw for the outside 2 holes.

Sold singly,6 per c...

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat

MANIFOLD NUT SHORT BRASS 5/16" UNF

GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

($0.45) £0.45 exc vat

($0.54) £0.54 inc vat