CARB BUTTERFLY ANTISTALL HS4 WAXSTAT JET TYPE
WZX1324

($17.24) £17.24 exc vat

($20.69) £20.69 inc vat

In stockIn stock
plain butterfly with small hole at bottom for HS4 waxstat jet type carb and uses WZX177 spindle-or see kit full rebuild kit CRK121. This is usually fitted to FZX3013 replacement carb --same size butterfly on all 1.5" type carbs

($17.24) £17.24 exc vat

($20.69) £20.69 inc vat

In stockIn stock

Recommended usage 1 x WZX1324 to fit one mini.
Carburettor HS4 - Qty 1
Carburettors HS4 - Qty 1

Alternative products
CARB BUTTERFLY HIF38 DISC KIT
WZX1387

Plain butterfly disc kit for the HIF38 carb,which we sometimes order in in as requested by the customer as they are very slow selling--same size butterfly on all 1.5" carbs

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat
People also bought products
VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS
VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat
HIF44 CARB REPAIR KIT WITH PLAIN THROTTLE DISC
CRK162

($79.01) £79.01 exc vat

($94.81) £94.81 inc vat
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

($19.60) £19.60 exc vat

($23.52) £23.52 inc vat
RETURN SPRING KIT FOR HS4
WZX1335

Return spring kit for HS4 carburettor spindle.

($7.65) £7.65 exc vat

($9.18) £9.18 inc vat
JET ASSEMBLY R/H TWIN HS4
AUD9102

Also denoted by its black plastic base. Twin HS4 carbs have 30 degree float bowl angles and therefore this jet is easier to fit as it is longer. L/H carb uses AUD9098A std single HS2 jet.



For...

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
CARBURETTOR WEBER 45DCOE
C-AHT143

Genuine Weber 45DCOE Carb, calibration from the factory is as below:





Choke 36

Throttle Plate Angle 78 degrees

Auxiliary Venturi 4.5

Needle Valve 200

Main Jet 145 Pump Jet 45...

($532.50) £532.50 exc vat

($639.00) £639.00 inc vat
CARB HIF44 FULL REBUILD KIT EXCEPT TURBO
CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

($97.68) £97.68 exc vat

($117.22) £117.22 inc vat
CARB BUTTERFLY KIT 1.5"
WZX1323

this is the plain butterfly disc for the HS4 1.5" carb and if you have the air valve type butterfly disc see WZX1325

($14.81) £14.81 exc vat

($17.77) £17.77 inc vat
JET BEARING KIT HS4
WZX1442

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

($21.77) £21.77 exc vat

($26.12) £26.12 inc vat
SPINDLE KIT HIF44-EARLY METRO
WZX1127

spindle and fixings only for HIF44, only with one end threaded as opposed to WZX1128 which is threaded both ends-see WZX1183 for disc

($19.61) £19.61 exc vat

($23.53) £23.53 inc vat
SPINDLE KIT HS4 1.5"
WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
CARB SPINDLE KIT 1.1/4" HS2
WZX1310

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

($11.70) £11.70 exc vat

($14.04) £14.04 inc vat
CARB BUTTERFLY KIT 1.25 HS2
WZX1320

The butterfly kit for HS2 carbs and the spindle kit is WZX1310

($15.99) £15.99 exc vat

($19.19) £19.19 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
CARB NEEDLE SPRING HIF and HS4
AUD3306

The little spring that sits at the end of a spring loaded carb needle on late HS and all HIF carbs where applicable.

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
CARB HIF38 SERVICE KIT
CSK94

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

($63.02) £63.02 exc vat

($75.62) £75.62 inc vat
CARB HS2 FULL REBUILD KIT
CRK104

For HS2 single carbs this is the Complete kit of the parts required for an overhaul kit- if you do not require the spindle and disc and bushes see WZX1851

($73.50) £73.50 exc vat

($88.20) £88.20 inc vat
HS4 DASHPOT COVER - BLUE
R23BLUE

brighten up your engine bay area with these bright alloy carb covers --these fit HS2 1.25" type carbs only- see R22 for chrome look and R22RED

($12.89) £12.89 exc vat

($15.47) £15.47 inc vat
PETROL PIPE HOSE 1 METRE
PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

($3.27) £3.27 exc vat

($3.92) £3.92 inc vat
NEEDLE BFY SWINGING TYPE - HIF44 COOPER 90 on
NZX8071

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement. They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed sol...

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat