PULLEY STEEL .87-1 WATER PUMP 28 TOOTHBELT PULLEY
C-AEA478

£51.60 exc vat

£61.92 inc vat

In stockIn stock
part of our toothed belt drive systems this is the water pump pulley with 28 teeth in steel ideal for use in dirty or dusty conditions where the alloy lightweight vesrion C-AEA477 can wear quickly

£51.60 exc vat

£61.92 inc vat

In stockIn stock

Recommended usage 1 x C-AEA478 to fit one mini.

Alternative products

Part of our toothed belt drive systems this is the water pump pulley with 28 teeth in alloy for lightness.

part of our toothed belt drive systems this is the water pump pulley with 28 teeth in steel ideal for use in dirty or dusty conditions where the alloy lightweight vesrion C-AEA477 can wear quickly

People also bought products

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impe...

Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney red Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer wh...

Radiator hose kit for all pre 1989 1275cc Minis except clubman which has a longer top hose. the kit has top and bottom radiator hoses and two lengths of heater hoses(1m and 1.2m long)…all in shiney black Silicone. These should last forever and not de...

Complete fixing kit for a water pump, includes replacement silicone bypass hose, clips, superseal gasket, replacement bolts and washers.

Long lasting silicon by pass hose between cylinder head and water pump.

These are easy to cut and slide on easier than the old conventional rubber type.

It has been made this length to fit 1275cc engine,which used the longest hose.<...

A must for any tuned road car. A full electric fan kit, Mini Spares helped to design with precision made brackets to mount directly to the mini radiator to suck air in order to maximise efficiency and cooling. It therefore does not block cold airflow...

A special spacer section (25mm bore)fits into the top hose and the control unit has a heat setting screw to calibrate your own water temperature. This whole unit will control your existing fan(even a Kenlowe) The top hose will have to be cut to fit t...

This hose has the large outlet one end to fit the special thermostat housing

fitted to the Carb type Cooper.

Special thin type clip for fitting the water by pass hose between the water pump and the cylinder head. Most ordinary jubilee clips will not fit the tight area where the hose fits. Also used on C-AHH8537 oil cooler hose.

Use this plate in place of the heater valve. For use any time the heater is removed!

tooth belt drive fan belt

this is for the tooth belt drive crank pulley to the 28 tooth water pump pulley

The upper radiator bracket was different on clubmans and was wider owing to the fact that a spacer was often used on the fanblade for clearance.

Silicone heater hose, 39" for cars with the original heater valve bolted on the cylinder head. Pre 1976 cars can use 2 0f these lengths, commonly known as 1/2" bore heater hose. Also see C-GRH1007 for the longer 42" hose on 1976 on model...

This is the longer type cylinder head adaptor tube which allows fitment of the by pass hose without removing the head. The shortened hose GZA2083 slides up the tube and then back down on the water pump tube. Frequently rusted on old head...

Hose clip for 5/8" heater hose and used to locate 3/4" diameter anti roll bar in our C-AJJ4008 kit.

special tooth drive belt for cooling/charging pulleys

this one fits the alternator pulley and the 38 tooth water pump pulley.

For minis with latest A plus water pump pulley CAM6408 (4.75" wide) and an alternator. This belt is slightly shorter than GCB10838 so always keep a spare so you know which size belt fitted your car best. This seemed to be fi...

Oil temperature sender unit housing for checking oil temperature.

Fits into the oil cooler hose.(Not compatable with braided hoses) Fitted before the oil cooler will show maximum temperature reached. After the oil cooler it will tell you the...

Thermostat 88 degrees. Fitted to 998 and 1275 minis from 1988 to 2000. Also Metros 1980 to 1990 998 and 1275.