Windscreen Washer
Label Part No Description Quantity Comments
1 GWW918 Washer bottle round with 2” (51mm) cap - Tudor type 1 MK1/2 Mini and MG range
1 17H2536 Washer bottle round with 13/8” (35mm) cap - Winguard type 1 Original fitting MK1/2
2 37H9712ORIGINAL Bracket for bottle MK1/2 1 Original fitting MK1/2
3 37H9672 Wire clip for bottle 2 Original fitting MK1
4 24A1387 Clip for bottle (bicycle type) 1 Original fitting MK2
5 GFK1123 Spring washer 2
6 GFK3210 Nut 3/16”UNF 2
7 SE910201 Screw 3/16”UNF 3/4”long 2
8 37H9712 Bracket stainless steel for round bottle No.1 1 MK1/2 Mini and MG range
9 GWW916 Small 1/2 litre washer bottle, takes small cap [LINK]GWW951[/LINK] - C.W.E 1 1970-80 - use [LINK]GWW906[/LINK]
10 GWW906 Large 1 litre washer bottle, takes [LINK]GWW951/[LINK] cap 1 1970-80
11 GWW907 1.7 litre washer bottle, takes [LINK]GWW952[/LINK] cap and [LINK]GWW951[/LINK] insert 1 1980 on
12 GWW935 Bottle and cap for integral electric pump 1982-88 1 Uses [LINK]GWW1192[/LINK] pump
13 CZH1624 Bracket for windscreen bottle - N.L.A 1 Use [LINK]CZG1496[/LINK]
13 CZG1496 Bracket for windscreen bottle in boot 1991 on 1 Replaces [LINK]CZH1624[/LINK]
14 GWW951 Cap for [LINK]GWW916[/LINK]/[LINK]GWW906[/LINK] (fits in[LINK] GWW952[/LINK], cap for [LINK]GWW907[/LINK]) 1
15 GWW952 Cap for [LINK]GWW907[/LINK] ([LINK]GWW951[/LINK] fits into centre hole) 1
16 GWW102 Manual washer pump to 1980 1
17 GWW125 Electric washer pump 1 1980 on
18 GWW1192 Electric integral washer pump, fits to [LINK]GWW935[/LINK] bottle 1 1982-88 was GWW130
19 GWW807 Jet, MK1/2, black 2
19 MS389 Jet, MK1/2, twin jet nut fit 2 Relieve bodywork
20 GWW810 Jet, Chrome, nut fit single jet MK1/2 - 1/8”bore 2 3.2mm ends
20 GWW801 Jet, Chrome, nut fit twin jet - 3/16”bore 4.8mm 2 Relieve bodywork hole
21 GWW804 Jet, MK3 fits round locating hole 2 1970-80
21 GWW1080 Jet, fits D shaped locating hole - was GWW842 / GWW829 2 1981 on
22 GWW504 Valve for use with [LINK]GWW807[/LINK] jet - MK1/2 - Winguard type 1
23 GWW506 Valve for use with [LINK]GWW804[LINK] jet - Tudor type 1 1970 on until [LINK]GWW935[/LINK] bottle
24 GWW401 T piece, (3/16”) 4.8mm ends for washer hose 1 Uses 4.8mm hose
24 GWW404 T piece, 2 small bore ends one large 1 2 x 3.2mm end & 1 x 4.8mm end
25 GWW408 T piece valve, was [LINK]GWW407[/LINK] - MK1/2/3 1 2 x 3.2mm end & 1 x 4.8mm end
26 GWW201M Washer tubing 1/8” (3.2mm), small bore (per metre) 1 As required
26 GWW202M Washer tubing 3/16”(4.8mm), large bore (per metre) 1 As required
27 BAU2043A Grommet for pump mount in washer bottle 1
28 GWW975 Blue cap for [LINK]GWW935[/LINK] Bottle 1 Supplied with new [LINK]GWW935[/LINK]

Note: Windscreen washer tubing was known as 1/4" bore. Now the metric equivalent is 3/16" 4.8mm bore, but known as 5mm.

This is the largest size used and fits correctly.



  Reconditioned Road/Rally Race Quality Valves
998cc GCG1007MS   C-AHT88
1275cc pre 1992 GCG1009MS C-AHT135 MSE3 / MSE8
1275 cc 1992 on GCG1009METRO MSE6 MSE4
MPI (Twin Point) GCG1009 C-AHT136 MSE7