Fuel Tanks and Pumps
Label Part No Description Quantity Comments
1 ARP1043 Petrol tank 7.5 gallons, standard filer neck 1 998cc
1 WFE10093 Petrol tank 7.5 gallons, restricted neck for lead free 1 C.W.E - Cooper HIF44 carb
1 WFE10420 Petrol tank 7.5 gallons, restricted neck (open loop) 1 C.W.E - 1275cc HIF38 carb
1 WFE104530 Petrol tank 7.5 gallons, restricted short neck (Germany) 1 N.L.A - SPI Germany
1 WFE106140 Petrol tank 7.5 gallons, restricted neck was WFE10278 1 N.L.A - SPI/MPI Japan only
1 WFE106090 Petrol tank 7.5 gallons, restricted short neck was WFE10401 1 SPI & MPI
2 2A2069 Seal, cushion for tank to body 1
3 XNB10007 Fuel tank sender unit less seal (7) and ring (6) 1 Pre injection
3 XNB100380 Fuel tank sender unit less seal (7) and ring (6) 1 Injection only
4 WFX100810 Fuel pump complete, was WFX10045 1 Fits both SPI & MPI
5 WFX100811 Fuel pump part only, SPI only 1
5 WFX100812 Fuel pump part only, MPI only 1
6 ARA1501 Locking ring for sender unit to tank seal 1
7 ARA1502 Seal, sender unit to tank 1
8 NAM3928 Fuel cap black, non vented, (replaced by NAM3927 vented) 1 N.L.A see notes
8 WLD10027 Fuel cap black, non vented, non locking, was NAM3927 1 N.L.A see notes
8 WLD100350 Fuel cap chrome, vented, non locking, was 18G8601 1 Not for injection cars
9 21A2109 Seal for petrol caps 1
10 WLD100660 Fuel cap, locking stainless steel, non vented 1
10 GSS154A Locking vented petrol cap, stainless steel, Saloon 1 Except Injection
10 GSS215 Locking vented petrol cap, 3” round top (Wilmot Breedon type) 1 Except Injection
11 CRC7575 Vent pipe for tank - Correct length 1
11 GWW202M Vent pipe for tank 3/16” (4.7mm) plastic tube (alternative) 1 Sold per metre
12 21A2838 Strap for petrol tank 1
13 GFK5184 Bolt 5/16” UNF 3/4” long for strap to seat pan 1
14 GFK1125 Spring washer 5/16” 1
15 SH605161 Bolt 5/16” UNF 2” fully threaded to help pre shape strap 1 N.L.A use [link]GFK5184[/link]
16 14A7057 Seal for standard neck length to body, pre 1996 1
16 WGG100010 Seal for short neck to body, thin type fitted to [link]WFE106090[/link] 1 All MPI
17 21A919 Fuel line pipe 96” long, 1/4” bore easy bend copper 1 998cc Pre 1990
17 FP226 Fuel line pipe 104” long, 5/16” (8mm) bore. Copper, 1275cc HIF38 1 Upgrade for performance use
17 PP3 Fuel line, mechanical pump to carb 1 14” (35.5cm) long
18 6K838 Protection sleeve for fuel line was WZF10002 1 N.L.A
19 21A2332 Braided petrol hose 5/16” bore 21/2” long 1 As required
19 PPK1 Braided petrol hose, 1/4” bore 21/2” long 1 As required
19 PPK2 Braided petrol hose, 1/4” bore 5” long 1 As required
19 PPK3 Braided petrol hose, 1/4” bore 71/2” long 1 As required
19 PPK4 Braided petrol hose, 1/4” bore 10” long 1 As required
19 PPK5 Braided petrol hose, 1/4” bore 12” long 1 See [link]PETROLPIPE[/link] also
19 PPK6 Braided petrol hose, 1/4” bore 15” long 1 See [link]PETROLPIPE[/link] also
19 PPK7 Braided petrol hose, 1/4” bore 22” long 1 See [link]PETROLPIPE[/link] also
19 PETROLPIPE Rubber petrol hose 1/4” bore - sold per 30cm (12” lengths) A/R
20 ACH5854 Clip for braided hose (alternative [link]GHC406[/link] worm drive clip) 2 As required
21 WFH10066 Hose, moulded fuel line, tank to feed pipe under floor 1990on 1 N.L.A use [link]PETROLPIPE[/link]
22 WJX10010 Protector for fuel lines 1990 on 1 N.L.A
23 AZX1818 Mechanical fuel pump 998cc 1
23 AZX1817 Mechanical fuel pump 1275cc HIF44 carb 1990 on 1
23 WND10005 Mechanical fuel pump 1275cc HIF38 carb (open loop) 1 5/16” pump inlet
24 GUG705603GM Spacer block with gaskets for pump to block 1
25 GUG705779GM Gasket only for spacer block to pump or block 2
26 WFU100560 Bracket on fuel tank with fuel cut off valve - 1275cc 1 N.L.A
27 WLV10007 Fuel cut off valve - 1275cc 1 N.L.A
28 WLV10009 Valve, 2 way - 1275cc 1 N.L.A
29 EDP9317 Seal, fuel pump to tank 1 Injection only.
Note: See chart to identify correct petrol caps and availability on page 60.