DOOR CHECK STRAP DARK GREY
14E4290

£12.89 exc vat

£15.47 inc vat

In stockIn stock
Original type MK1/2 door strap in Dark grey(darker than cumulus grey and dove grey was slightly lighter again)

Check straps matched seat colours or outer main seat colour on two tone types

ALE1221 Black

14E8403 Cumulus grey-light grey-darker than Dove Grey trim

14E4288 Powder Blue

14E4289 Tartan Red

14E42901221 Dark Grey as used on seat outers

14E4291 Porcelain Green

£12.89 exc vat

£15.47 inc vat

In stockIn stock

Recommended usage 2 x 14E4290 to fit one mini.
Seats and Interior Trim Cooper & 'S' MK1 1961-67 - Qty 1
Front Door - Sliding window type - Qty 2
Seats and Trim - Mini Traveller MK1 - 1961-1967 - Qty 1
Seats and Interior Trim MK1 Saloons 1961-67 - Qty 1

Recommended products

Screw for either end of the material check strap on MK1/2/van/pickup minis with external hinges. The head of this screw is chromed for a superior finish.

This plate has recessed holes in for the check strap screws.

2 per door are required and these are only for cars with external hinges that had the material check strap as per MK1/2 and vans.

The larger check strap bracket on the body that has a curved section. Shown as black in the picture. One per door required.

The door stiffener plate for the check strap on mk1/2 doors with external hinges

one per door required.

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

People also bought products

The chrome moulding to fit the door bin on first 80 thousand MK1 minis with extra length tag with screw hole for location.

This is held on by screws but a single sided prong clips ADH3809 can be used in the centre - beware other...

These panels hold the door panels in place under tension inside the door aperture. It is not essential, but well worth replacing or renewing these in conjunction with new door panels. Sold in pairs.

MK1/2 interior door handle with screw and washer.

This solid "spoon" handle is brittle and easily broken.

These are the original shape as sold under the Unipart label, not the later Rover bagged item which was a reproduction with d...

Metal chromed old type classic handle revived for use on MG variants and then a fashion item on minis. On later cars CMZ312 screw might be required which has a smaller diameter head and longer thread. Length 90mm.

Fitted on cars up to about 1982 approximately before spring type knob on handle was introduced for safety homologation YXX3199PA.

The screw this CZA7109 handle is ZKC3317.

Original type MK1/2 door strap in red

Check straps matched seat colours or outer main seat colour on two tone types

ALE1221 Black

14E8403 Cumulus grey-light grey-darker than Dove Grey trim

This 10 piece handle set is exactly the same kit as sold by every other mini specialist is in bright alloy (not polished alloy as per our other superior kit MSA1129) and consists of two of each of the following, door openers, window winders and their...

Original type MK1/2 door strap in green

Check straps matched seat colours or outer main seat colour on two tone types

ALE1221 Black

14E8403 Cumulus grey-light grey-darker than Dove Grey trim
<...

The chrome moulding to fit the door bin on all sliding type window doors, MK1/2 and all vans/pickups. See 14A6879 for early cars with lug ends held on by screws

Use the correct single sided prong clips only ADH3809 ...

This plastic handle fitted any wind up window cars up to the introduction of the twin points, which then changed and the handle fitted from 1996 on is now obsolete.

If you drive your MINI/MGB often then you know that the standard plastic window winder handles are prone to breaking. These chrome metal handles are somewhat stronger and look great alongside the other chrome trim in the car's interior. Next time ...

Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...

Mini Pickups had a one piece headlining frame with the canopy glued and stapled to it. Cream Crackle was used on early models and the light grey was used during the 1970's. These frames are no longer available, so make sure you keep the frame safe if...

Black door pocket liner for the R/H door which has sliding windows and external hinges

Black door pocket liner for the L/H door which has sliding windows and external hinges

White with mirror aftermarket sun visor for Mk3 models from 1977 -92 which were thinner than pre December 1965 for safety crash requirements. Check out the special clips to hold these visors as they are sold seperately in car sets only as [link]SV202...

Plain white with white backing aftermarket sun visor as fitted to Mk3 models 1977-92 which were thinner than Mk1 for safety crushing requirements. Although not standard for earlier models will fit cars from December 1965. Check out the special clips ...

Cream with crackle finish sun visor fitted as standard from December 1965-69 but will fit Mk3 on if required. With mirror for passenger side. For a car set of clips see SV2021

Mk1/2 1965 on cream crackle SV2017C

Mk3 196...

Cream colour crackle finish sun visor as fitted from december 1965 onwards. Will fit later cars if required. Drivers side without mirror.Check out the special clips to hold these visors as they are sold seperately in car sets only as SV2021<...