£112.00 exc vat
£134.40 inc vat
In stock
If you are about to undertake a gearbox strip down and you are using an old Haynes manual beware. When locking the gearbox into 2 gears to undo the large mainshaft and Ist m...
£112.00 exc vat
£134.40 inc vat
In stockRecommended usage 1 x 22G1094 to fit one mini.
Budget priced baulk (synchro) ring has been the same since 1962, originally steel but then sintered. These rings slow down the gears to insure that they mesh without crashing. They have a machine surface on them that is the first thing to engage the ...
Mini Spares genuine part, made for reliability, because the current Rover 22G2033version is not good enough. These specials are CNC grooved for correct shape and machined for concentricity using the original type fixings to get the corr...
Output drive shaft from the differential on Rod change type gearboxes,the teeth very rarely wear badly but the side cover bushes(2A3538)sometimes ruin the shaft causing those dreaded oil leaks from the seals in the output covers CHM85.
these...
Every 4 synchro gearbox had a straight cut first gear as standard.
This one has 31 teeth and beware complete straight cut race gears sets use a 29 different tooth count.
4 synchro close ratio helical gear kit for pre A+ gearboxes using an 18mm A+ mainshaft.
Contains 1st motion shaft for larger 18mm mainshaft(A Plus) but with original 22G1040 pre plus laygear which uses a single step layshaft. Ca...
31 teeth Idler Gear, with one shaft longer than other as per last Rover design modification.If the Mini drive train has a weak link, it's the connection between the engine and the transmission! The idler gear often takes the abuse caused by wear and/...
Genuine new 6 tooth speedo drive spindle that mated with 17 tooth speed pinion 22A1881 on cars with 10" wheels before 1980 plus any year 1275GT. Also 12"wheel cars with 3.44 final drive 1984 on. On the Metro mini this was used with 17 an...
32 tooth first gear outer track only, for the sprite/midget 3 synchro gearbox.
This part number was for complete 1st gear hub assembly originally and the outer track was 22G1119 but when Rover stopped production we used this same number for<...
With this 18 tooth 1st motion shaft and the 22G1040 laygear these 2 parts made the pre a plus 4 synchro gearbox into a close ratio gearbox as fitted in the 1275GT and Cooper S in standard form.
Input Gear 4-synchro gear.24 teeth
can be used on 3 synchro but the stem part is shorter so you will need to use a spacer by cutting up your old 3 synchro input gear to act as a spacer.
"S" laygear. UK made for all pre-rod change. 4 synchro gears were the same except for the laygear and 1st motion shaft. The Cooper S and 1275GT had a closer ratio with a 18 teeth 1st motion and 29 teeth (15,20,25,29) 22G1040 laygear. The...
18 tooth "S" 1275Gt Ist motion shaft for later A plus layshsft/mainshaft use. Used by competitors who have to use standard gears but wish to upgrade the 14mm end of the mainshaft to the later 18mm type with the larger bearing to give better longevity...
Grey colour 18 tooth (18.8mm diameter)to go with the 7 tooth Red colour coded larger worm drive spindle TXF10004which is 23mm in diameter-for
SPI overseas 3-2 ratio diff.
BEWARE-there is also another smaller worm 7 to...
This is the gear on the end of the 1st motion shaft that connects with the idler gear. 29 teeth for A plus only-----earlier models had 24 teeth.
MPI Mini /Metro late cars could have 28 teeth with a groove marking-part DAM6337
the ge...
17 and 18 teeth rod change rev gear and the 5 speed version-all single bush
UK MADE third and fourth synchronising hub for all 4 synchromesh mini gearboxes
to the last drawings and specifications
A Plus 2nd gears are marked with a single identification groove.
If you are about to undertake a gearbox strip down and you are using an old Haynes manual beware. When locking the gearbox into 2 gears to undo the large mainshaft and 1st moti...
Primary gear as fitted to all 850/998/1100 from 1965 on, now fitted with a floating bush. For Cooper S and 1275 engines pre A plus primary gear see 22G1053 - end float clearance is 0035-.0065.
24 teeth
This is the 1st/2nd gear complete inner and outer hub assembly for all 4 synchromesh gearboxes. 33 teeth outer track
This 3rd gear has one single groove marking going around the teeth for identification as an A Plus gear
If you are about to undertake a gearbox strip down and you are using an old Haynes manual beware. When locking the gearbox into 2 gears t...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.