Mini Spares copy of the RAC/ Scottish works type-For serious off-road and rough stages, the only type to fit is the rounded sledge type front version, which helps ride the car over potentially damaging foreign bodies. Extra strengthening bar fits int...

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions. Cars manufactured before 1976 can use the same bush (2A5818/POLY) at the front and rear of the subframe, ...

ALLOY EXTENSION FOR C-AJJ3320/1 WHICH PROTECTS DIFF HOUSING AND EXHAUST COLLECTOR.

Every nut, washer, bolt, rubber bush and 2 pins that hold the rubber bushes that are prone to rusting badly and are required every time you do a subframe change. Including the 2 large penny washers this kit has 36 components. Other companies offer l...

Towing eye that fits in place of the bolt holding the front panel to the subframe. For stronger later version see KPU100160.

When using certain accessory tow bars make sure the towing eye is in the right position to suit or it w...

Priced each, 2 of these are fitted to the rear of the front subframe on all cars from 1976 on. These original rubber type can be replaced by alloy or other equivalents, see our accessory catalogue. ALSO SEE 21A2599MS.

From Xparts - but not original Rover - 2 of these rubber mountings are fitted at the front of the front subframe on all vehicles from 1976 (mk4) on. To help quieten road and engine noise. To stabilise steering by stopping subframe movement we suggest...

Fitted to rubber mounted subframes from 1976 on this packing piece goes between the front panel and the subframe mounting points. You might be surprised how many of these were fitted to your car when it came out the factory. When replacing the front ...

Standard upper front subframe mount.

If you have a late model Mini (1976 on) then you probably know that the front subframe is isolated by these rubber mounts. While this makes the car quieter, it hinders handling by letting the subframe mov...

This is the real way to go if you want to make your front subframe solid mounted in metal components to replace the rubber set up on the front subframe from 1976 on

Fits all minis except Autos and those with hardy spicer joints, has no lug on as required for rod change L/H side. Sold singly.

The Mini transmission output side cover is notorious for leaking oil, but replacing the seal doesn't help for lon...