MANIFOLD STD BORE EXHAUST LONG CENTRE BRANCH (LCB)...

Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s and for street 1380s.

There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using [lin...

£86.66 exc vat

£103.99 inc vat

MANIFLOW 2" BORE EXHAUST SYSTEM LST5A SIDE EXIT TW...

C-ARA334

2" bore twin box exhaust system. Rear side exit in the standard position. If the 1.75" bore of the RC-40 isn't enough and you want to make it better, and louder, this 2" Maniflow system is for you. Very high quality, with skid plate on the bottom of ...

£198.75 exc vat

£238.50 inc vat

MANIFLOW FROM CATALYST BACK TWIN BOX 92 on EXHAUST...

C-ARA336

For all cars with a catalyst--this section fits from the catalyst back and has 2 silencer boxes.1.75" bore

£136.74 exc vat

£164.09 inc vat

MANIFLOW SIDE EXIT 1.75" TWIN BOX EXHAUST SYSTEM

C-ARA331

Standard larger 1.750" bore twin box exhaust system for saloons.

see C-ARA339 for van and pickups.

£114.48 exc vat

£137.38 inc vat

MANIFOLD INLET WEBER 45 DCOE 2.75" MANIFLOW STEEL

C-AHT777A

2.75" long steel intake manifold by Maniflow for Weber 45 DCOE/DHLA.

£192.39 exc vat

£230.87 inc vat

MANIFOLD LCB EXHAUST STAGE 2 WITH SPECIAL CENTRE B...

C-AEG376

Standard bore road LCB (1-3/4"id) that has an enlarged and reshaped middle pipe which creates a type of vortex, simulating a pulsing effect similar to the outside two pipes,thus producing an improved BHP,Torque and power curve.Ideal for very hot smal...

£118.54 exc vat

£142.25 inc vat

LARGE BORE LCB MANIFOLD LM5

C-AHT289

Large bore LCB for competition use or on very large bore street engines; such as 1400cc+. Y-piece outlet end is 2" outside diameter, 1.875"id.

The best quality production exhaust manifold available from Minispares. The Long Center Branch...

£221.27 exc vat

£265.52 inc vat

MANIFOLD STD BORE EXHAUST LONG CENTRE BRANCH (LCB)...

C-AEG365

Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s and for street 1380s.

There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using [lin...

£86.66 exc vat

£103.99 inc vat

INJECTION LCB MANIFOLD WHEN DELETING CAT

C-AEG374

LONG CENTRE BRANCH EXHAUST MANIFOLD FOR FUEL INJECTED CARS WITH A SENSOR TAKE OFF in main LCB body, THIS IS FOR USE WHEN THE CATALYST IS BEING REMOVED AND A RC40 EXHAUST IS BEING FITTED. If the catalyst is to be retained use [link]C-AEG3...

£99.91 exc vat

£119.89 inc vat

MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD

C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

£87.45 exc vat

£104.94 inc vat

STAINLESS STEEL LCB MANIFOLD - C-AEG365 (SSLM004)

C-AEG365S

Stainless steel Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s, and for street 1380s. And in stainless steel for long life!

There is NOT enough clearance room when fitti...

£221.27 exc vat

£265.52 inc vat

MANIFOLD LCB NEW CARB COOPER WHEN DELETING CATALYS...

C-AEG373

LONG CENTRE BRANCH EXHAUST MANIFOLD FOR FITTING CARBURETTOR POST 91 VERSION CARS WHEN REMOVING THE CATALYST AND FITTING RC40 EXHAUST.

Take off in "Y" piece. If the catalyst is to be retained use C-AEG368 which inclu...

£99.06 exc vat

£118.87 inc vat

MANIFOLD LCB CARB WITH CAT+LINK PIPE

C-AEG368

Basically the C-AEG373 LCB exhaust manifold but with a link pipe for retaining the catalyst on carb models after 1990-92.

£154.56 exc vat

£185.47 inc vat

CAST IRON MANIFOLD TO DOWNPIPE CLAMP

GEX7046CAST

Exhaust manifold to downpipe clamp. For 32mm o/d pipe size.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These cast clamps are the best style to use. A real piece of kit to use eradicating a multitude of likely p...

£7.20 exc vat

£8.64 inc vat

POLYURETHANE REAR COTTON REEL EXHAUST MOUNT

GEX7251POLY

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required. This is a stronger poly version.

£2.70 exc vat

£3.24 inc vat

MANIFOLD CLAMP 1.75" COOPER FREEFLOW WITH TAG FLAT...

C-AHT98

This is the clamp on the cooper freeflow manifold to clamp it to the engine for extra support, supplied with tag.

£4.95 exc vat

£5.94 inc vat

BRACKET ON GEARBOX TO HOLD EXHAUST (LARGER VERSION...

GEX7088

Original exhaust bracket for rod change gearbox but later on Rover reverted back to GEX7526 which seemed a bit of a backward cost cutting exercise.

£6.80 exc vat

£8.16 inc vat

MANIFOLD STD BORE MILLENNIUM LCB WITH CAST FLANGES

C-AEG364

Standard bore Budget priced LCB (1-3/4"id) with pre cast flanges to improve flow and save engine tuners time matching the ports. This is ideal for very hot small bore engines and for standard to high performance 1275s, including road 1380s.

£64.50 exc vat

£77.40 inc vat

EXHAUST MIDDLE MOUNTING

GEX7081

Middle exhaust mounting, bolts on to the front of the rear subframe and is the central or first of the rubber mountings. see GEX7081POLY for Poly type or if you are fed up with breakages see C-19G3257.The original Genuine pa...

£1.60 exc vat

£1.92 inc vat

MANIFOLD LCB SMALL BORE EXHAUST (LM2)

C-STR817

Small bore Maniflow LCB. Has a 1.5" outer diameter 1.375" internal diameter bore size. STD mini exhaust and downpipe size is 1.250".

If the 1.375" tapered end of about 2" is removed a 1.750 pipe will fit over remaining length of outlet pipe.

£117.72 exc vat

£141.26 inc vat

EXHAUST HANGER BRACKET ON REAR OF REAR SUBFRAME

C-ARA671

This is a bolt on conversion bracket to fit on the rear of the rear subframe to take the later type rubber strap mounted exhaust systems.Later subframes 1991 on had these parts welded in position.

£12.96 exc vat

£15.55 inc vat