REAR SPAX ADJUSTABLE STANDARD HEIGHT SHOCK ABSORBE...
C-STR307

£69.00 exc vat

£82.80 inc vat

In stockIn stock
All shock absorbers are not created equal, the Spax brand is often considered the top of the heap Spax dampers are Krypton gas pressurised for much longer life and unlike standard oil filled shocks they are consistent in light to heavy use. The screwdriver adjust feature not only allows you to tailor them to your specific likes, but the ease of adjustment encourages you to change them as often as needed.

Spax are available in standard length and from pin centres measure

C-STR306 for front with closed length 228.50mm.open length 327.50mm C-STR307 for rear with closed length 261.25mm.open length 385.25mm

Spax shorter length for lowered cars and from pin centres measure

C-STR304 for front with closed length 218.50mm.open length 312.50mm C-STR305 for rear with closed length 251.25mm.open length 365.25mm



Mini Van,Estate and Pick-Up rear use longer length and from pin centres measure

C-STR308 closed 271.25mm.open length 410.25mm



FOR EXTRA TRACK PERFORMANCE SEE

G3275 for front with closed length 218.50mm.open length 312.50mm

G3276 for rear with closed length 251.25mm.open length 365.25mm



All are sold individually but it is highly recommended that they are fitted in axle pairs

£69.00 exc vat

£82.80 inc vat

In stockIn stock

Recommended usage 2 x C-STR307 to fit one mini.
Rear Suspension Rubber Cone - Qty 2
Rear Damper and Suspension - Qty 2

Recommended products

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

Alternative products

Priced Each. Fully open length from pin centres is 41.5cm and closed length is 28cm. Sold singly but recommend fitting pairs

All shock absorbers are not created equal, the Spax brand is often considered the top of the heap. Spax dampers are Krypton gas pressurised for much longer life and unlike standard oil filled shocks, they are consistent in light to heavy use. The scr...

Kit products

SPECIAL OFFER OF 4 ADJUSTABLE SHOCKS AND SUSPENSION TRUMPETS. The shocks are standard height Mini Spares Spax adjustable and the adjustable suspension trumpets are Genuine Hilos.

SPECIAL OFFER OF 4 ADJUSTABLE SHOCKS AND SUSPENSION TRUMPETS. The shocks are standard height Mini Spares Spax adjustable and the adjustable trumpets are the bright metal budget type.

People also bought products

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

Standard gas filled replacement rear shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

GSA71541 Unipart original offering

442001 KYB standard replacement

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

All models of the Mini use the same rear hub (this piece holds the rear wheel bearings). The Mini's rear wheel bearings are more than adequate, usually requiring only occasional repacking with grease. The weak link may be the cast iron hub; it is not...

Koni Shocks Possibly the best name in shock absorbers, and they're available for the Mini! Sold singly but recommend fitting pairs.



Please note some small modifications maybe necessary on the damper cover to clear the bodywork o...

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type from the 1959/60 era or any arms if they are bent or damaged. If you've ever had to rebuild a Mini trailing arm you know w...

Complete rebuild kit for rear radius arm as sold by us since 2005.

Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.

Kit Includes: shaft, beari...

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type 1959/60 era or bent damaged arms.

If you've ever had to rebuild a Mini trailing arm you know what a hassle it can...

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

Mini Spares product from own original tooling since 1989.This small sheet metal panel mounts below the horizontal seam, covering the pivot pin of the R/H rear radius/trailing arm.

This shroud uses 14A7091 rubber plug not suppl...

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

Correct size split pin for the rear hub nut and the early smaller type CV joint GCV1105 fitted to drum brake cars and cooper small discs.

Split pin for common clevis pin list

GFK101 for CLZ409 ...

These are the metal rods required to fit your Hilo kit to the rear of a mini.

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

For the front wheel bearings of the Spridgets, rear of the Mini.

This is the rubber gaiter that fits suspension knuckles GSV1118, GSV1118MS, Plus it also fits many aftermarket and some old genuine track rod ends. Rover and Unipart changed designs and suppliers many times so we cannot advi...