Bracket on the crossmember that holds the seat.

2 required per seat.

£8.40 exc vat

£10.08 inc vat

HANDBRAKE LEVER MOUNTING BRACKET 1976 on

This bracket is the main mounting bracket for the handbrake lever assembly and is welded onto the back of the seat crossmember and to the rear floor section.

Only for rod change cars with late type single cable handbrake.

the early ...

£10.00 exc vat

£12.00 inc vat

now

£8.50 exc vat

£10.20 inc vat

CROSS MEMBER SQUARE TUNNEL FOR ROD CHANGE MINIS ON...

CZH2675

The crossmember holds the seat brackets and has the correct shape on the bottom to sit correctly on the floor of the rod change tunnel only. This is the complete section from inner sill one side to the other. Fits all square type rod change gearbox f...

£56.00 exc vat

£67.20 inc vat

HANDBRAKE MOUNTING REAR BRACKET 1976 ONWARDS

CZH3213

Rear handbrake bracket. 1976 onwards for single cable lever. Welds to tunnel. Not included on CZH2669 floor. For forward bracket see CZH3214.

£10.44 exc vat

£12.53 inc vat

FLOOR PAN VAN/ESTATE FRONT TO REAR LESS CROSSMEMBE...

24A604

Floor pan for Mini van/estate with no x member for remote change gearbox. Non Genuine. For saloon see 14A6491

picture is just to show what you get but bulge on centre tunnel for starter button appears to be on wrong side as this...

£510.00 exc vat

£612.00 inc vat

ORIGINAL STYLE METAL FLOOR PLUG (1" FITTING)

14A7081METAL

Metal floor plug as per original with rubber seal.

For use in 1" hole.

£0.99 exc vat

£1.19 inc vat

REAR FLOOR PAN RIGHT HAND NON GEN 1992 ONWARDS

MSL26R

Aftermarket version of the rear R/H floorpan for 1992 on cars.

Appears to be a part section of the genuine whole length floor Right hand side.

This has extra length to go just under x memeber at 37.5"95cm long and under glove compar...

£52.50 exc vat

£63.00 inc vat

REAR FLOOR PAN LEFT HAND NON GEN 1992 ONWARDS

MSL26L

Aftermarket version of the rear L/H floorpan for 1992 on cars with cuved shape for tunnel.

Appears to be a part section of the genuine whole length floor Right hand side.

This has extra length to go just under x memeber at 37.5"95cm...

£52.50 exc vat

£63.00 inc vat

UNDER FLOOR WIRING PIPE CLIP METAL TAG LONG

CW100120

wiring tag 55mm long and 70mm overall.

£1.28 exc vat

£1.54 inc vat

UNDER FLOOR WIRING PIPE CLIP TAG SHORT

CW100110

wiring tag short 25mm and 42mm overall

£1.34 exc vat

£1.61 inc vat

FRONT FLOOR PAN L/H PRESHAPED

MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

£33.00 exc vat

£39.60 inc vat

FLOOR PAN RODCHANGE

CZH2669

Floor,Front and rear assembly for Rod change gear lever cars 1973 on less the crossmemeber. This floor is the latest shape ever made wich is stronger and has a gusset section down the L/H side to carry extra fuel lines. Also see HMP441004/5 floor sec...

£265.00 exc vat

£318.00 inc vat

now

£225.25 exc vat

£270.30 inc vat

FRONT FLOOR PAN R/H PRESHAPED

MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

£33.00 exc vat

£39.60 inc vat

SLINGING BRACKET R/H REAR

24A42

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

£6.00 exc vat

£7.20 inc vat

now

£5.10 exc vat

£6.12 inc vat

SLINGING BRACKET FRONT

24A41

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on . Also acted as a stiffener...

£6.00 exc vat

£7.20 inc vat

now

£5.10 exc vat

£6.12 inc vat

SILL PANEL L/H VAN & ESTATE Mk3 profile 4" wide

14A9027

outer sill panel for van and estate versions L/H from genuine tooling but we consider it a MK3 floor shape pressing

£35.00 exc vat

£42.00 inc vat

now

£32.20 exc vat

£38.64 inc vat

SILL PANEL R/H VAN & ESTATE Mk3 profile 4" wide

14A9026

outer sill panel for van and estate versions r/h from genuine tooling but we consider it a MK3 floor shape pressing-6 flute indentations 6 flute indentations

£35.00 exc vat

£42.00 inc vat

now

£32.20 exc vat

£38.64 inc vat

SLINGING BRACKET L/H REAR

24A43

Every mini saloon has these,2 of 24A41 on either side front and 24A42 /24A43 sided on the rear --only purpose was for building/moving/ storing and preparation of cars at the factory to sit them on ..Also acted as a stiffener...

£6.00 exc vat

£7.20 inc vat

now

£5.10 exc vat

£6.12 inc vat

BOOT FLOOR PANEL REAR SECTION ONLY ABOUT 10" DEEP

MS54

This 9.5" rear section of the boot (trunk) floor is ideal for collision or rust repair. Many times if you are hit from the rear the floor right in front of the bumper gets damaged-this will fix it. If rust is your problem, then this along with a new ...

£32.00 exc vat

£38.40 inc vat

FLOOR TO WHEEL ARCH BRACKET L/H NON GENUINE

14A6610MS

Rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623

£13.35 exc vat

£16.02 inc vat

FLOOR TO WHEEL ARCH BRACKET R/H NON GENUINE

14A6609MS

Rear subframe mounting stiffener panel R/H with holes for subframe mounting to wheel arch. Sits on ALA5524 or ALA5528

£13.35 exc vat

£16.02 inc vat

LH REAR COMPANION BOX LH MK1 BIN

14A6495

Non genuine rear companion bin for external hinge cars. These are supplied without the ash try mount.

£31.50 exc vat

£37.80 inc vat

RH REAR COMPANION BOX RH MK1

14A6494

Non genuine rear companion bin for external hinge cars. These are supplied without the ash try mount.

£31.50 exc vat

£37.80 inc vat