£3.15 exc vat
£3.78 inc vat
In stock
£3.15 exc vat
£3.78 inc vat
In stockRecommended usage 4 x ERA1128 to fit one mini.
for minis with 8.4" discs-this is a caliper upgrade using 4 pot metro calipers
for the standard non vented discs. Kit includes the 2 calipers,4 correct caliper bolts,braided hose conversion kit,kevlar pads and pins.
Only 7 sets avai...
5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap
Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.
Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.
Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud
Correct size and length brake pad pin for the caliper using 8.4" disc size and vented calipers.
A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025
For use with 4 pot calipers as per Metro or Minispares own alloy type these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties. A set of s...
Special thread cutting screw 1/4 UNF 1.25" (31mm) long.
Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...
Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}
Non genuine seal repair kit. Minis from 1984 on with 8.4" discs plus.
This rebuild kit also fits the Midget/Sprite 1098/1275cc front disc brake calipers. The kit includes all the large seals needed to do both pistons in one caliper except fo...
New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...
These stainless steel bolts are to replace A Plus bolts used on the heater tap but will fit all earlier models making removal easier. Supplied as a pair only.
Quantity required one kit per car.
Pair of vented discs and Mintex GBP258AF pads,one of our best selling brake disc kits. Includes discs[link](GBD496)/link] which are a bargain.Only for carss fitted with vented discs already.
This is not a direct replacement kit ...
PRICED INDIVIDUALLY per disc but should always be fittted in pairs for safety and efficiency..
THERE IS AN ALTERNATIVE GROOVED AND DRILLED PAIR OF DISCS SOLD AS C-GBD496.
Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.
Also the bolt to hold the starter motor.
Also the bolt for the [...
Non genuine pair of L/H disc shield covers for the 8.4" disc size. Fitted as standard from 1984 to 2000. Non genuine but all that is available. It comes complete with the little locating bracket. If you require just the bracket, order it separately ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.