SELF TAP SCREW No10 1" LONG
GFK2264

£0.05 exc vat

£0.06 inc vat

In stockIn stock
Self tap screw No10 for holding wiper motor strap to body and any other use.

£0.05 exc vat

£0.06 inc vat

In stockIn stock

Recommended usage 1 x GFK2264 to fit one mini.

People also bought products
MINI BOOT CABLE FITTING KIT INCLUDING SPACERS
14A6740FK

£4.50 exc vat

£5.40 inc vat
M8 X 18MM FLANGED HEAD BOLT
FS108185

M8 X 18MM FLANGED HEAD BOLT

£0.07 exc vat

£0.08 inc vat
PETROL TANK STRAP RETAINING BOLT
13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

£0.59 exc vat

£0.71 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5184SS

Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

£0.53 exc vat

£0.64 inc vat
BOLT M8X120MM
FB108241

Bolt for the top alternator bracket on mpi cars.

£1.18 exc vat

£1.42 inc vat
SETSCREW 5/16" UNF STAINLESS STEEL
GFK5185SS

Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

£0.60 exc vat

£0.72 inc vat
MACHINED SCREW FOR 8B12501METAL TO LENS M4x10
MSB2003

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

£0.10 exc vat

£0.12 inc vat
BOLT 5/16"UNC 1.75"LONG FOR CLUTCH HOUSING
DAM7759

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

£2.00 exc vat

£2.40 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

£0.92 exc vat

£1.10 inc vat
FLANGED BOLT 5/16" UNF 1.75" LONG. CLUTCH CASE TO ...
DAM7758

Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}

£0.83 exc vat

£1.00 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

£1.22 exc vat

£1.46 inc vat
REMOTE HOUSING SHORT BOLT 3/8" x 1" UNC
GFK5240

Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.

Also the bolt to hold the starter motor.

Also the bolt for the [...

£0.32 exc vat

£0.38 inc vat
CLUTCH HOUSING TO BLOCK BOLT 1.75"x5/16"UNF
BH605141

There are 3 of these bolts fitted -1.75"long 5/16"UNF bolt ALTERNATIVE DAM7758.

Also used as longer bolt for water pump.

Also for the 21A1091 heavy duty tie rods on front suspension.

£0.25 exc vat

£0.30 inc vat
BOLT 5/16"X 1.5" UNC SETSCREW
GFK5235

£0.35 exc vat

£0.42 inc vat
BOLT 5/16" X 1" UNC SETSCREW
GFK5234

Bolt for CHM85 differential side cover. 1" long UNC useful for pre verto slave cylinder and starter bolt. Also 12A361 engine mounting bracket to alloy case.

£0.17 exc vat

£0.20 inc vat
SETSCREW 5/16" x 1" UNF
GFK5185

Front subframe to front teardrop mounting, clutch case to block.

Engine mounting to subframe - easier to use than the GFK5184 - 3/4" long

£0.21 exc vat

£0.25 inc vat
BOLT 1/4"x3/4"UNC LONG FOR C-AJJ4006
GHF160

Bolt used in our anti roll bar kit and for holding plate on speedo drive housing on gearbox

£0.13 exc vat

£0.16 inc vat
BOLT 1/4"x1" UNF SETSCREW
GFK5180

£0.10 exc vat

£0.12 inc vat
BLANKING PLUG INLET MANIFOLD & CYL HEAD
ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

£3.57 exc vat

£4.28 inc vat
BOLT OVERIDER AND WATER PUMP 5/16" x 1.25" LONG
SH605101

Bolt for the overider to lock plate at the back of the overider to secure it against the bumper.

Also has been used for the rear subframe trunnion 2A5819/21A2558.

Also used for the short water pump bolt.

£0.55 exc vat

£0.66 inc vat