73.5mm POWERMAX PISTON 9cc dish - SINGLE
P20659-00

£99.27 exc vat

£119.12 inc vat

In stockIn stock
For the ultimate in 1275cc overbored engine performance, double heat treated pistons. You can't beat cubic inches for performance, and the A-Series block can be bored far bigger than the factory ever imagined. The standard bore is 70.6mm, the 1380 bore is 73.5mm. This is .120" oversize and should be offset bored as per our half engines ENG001. Also see the pistons we now use C-STR311 which has a 3 piece oil ring as preferred by racers.The 73.5mm cast piston set designed by AE Hepolite is great for road/street and mild racing. Rings set for this are R39390-001.5mm ring and 4mm one piece oil ring or C-STN97 with 3 piece oil ring which performance engine builders prefer.

- AE Hepolite is now owned by Federal Mogul and trademarked "Nural".

Sold singly,4 per engine required--

£99.27 exc vat

£119.12 inc vat

In stockIn stock

Recommended usage 4 x P20659-00 to fit one mini.
Block Components & Pistons - Qty 4
Engine and Block 1275cc - Qty 4

Alternative products
73.5mm 9cc DISH EVOLUTION PISTON - SINGLE
C-STR311

Made in a hyper eutectic alloy with a high silicon content to provide tight cylinder clearances and quiet running characteristics, manufactured by a world class piston manufacturers specification" uses an optimised crown and dish (9cc) shape for impr...

£50.25 exc vat

£60.30 inc vat
People also bought products
1275 +60 HIGH COMPRESSION PISTON - SINGLE
P21253-60

Low drag 1275 piston standard size 2.780 plus 60 thou oversize (Rings included).

This piston has a possible compression ratio of 10.3:1 as fitted to Cooper RSP 1990. The engine then becomes 1328cc

The best performance 1275 pistons a...

£73.50 exc vat

£88.20 inc vat
POWERMAX 73.5 PISTON RING SET
R39390-00

ringset for powermax 20659 piston with groove sizes 1.5mm and 4.00mm for one piece oil ring -ring measurements are slightly under this --the tapered ring with the ridge fits second groove down-

£99.72 exc vat

£119.66 inc vat
PISTON SINGLE 998 MINI +060
P20773-60

998cc dished circlip type piston with 4 rings. Compression range of 8.3 to 9:1 depending on block and head but for best performance use later 3 ring flat top piston ADU3490-60. If you want to go faster, keeping that 998cc block, Big bor...

£70.59 exc vat

£84.71 inc vat
ACL SMALL BORE ENGINE CAM LINER SET
ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£16.14 exc vat

£19.37 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat
CRANK THRUST WASHER SET +0.003" 1275
ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat
MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE
C-AEM91886-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£78.62 exc vat

£94.34 inc vat
BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE
C-AEB91306-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

£69.06 exc vat

£82.87 inc vat
9° OFFSET WOODRUFF KEY
WKN9OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat
8° OFFSET WOODRUFF KEY
WKN8OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat
1° OFFSET WOODRUFF KEY
WKN1OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

£10.50 exc vat

£12.60 inc vat
NUT FOR 1300 CON ROD AS USED ON C-STR289
C-STR290

These shouldered hexagonal con rod nuts are made by ARP in the USA and considered the best available FITS 1300 con rods plus MGB late 18V engine numbers with 11-32" bolts.Sold singly and 8 required per engine.

£1.39 exc vat

£1.67 inc vat
RIGID ENGINE TO GEARBOX HALF MOON SEAL U
CAM6548

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

£4.00 exc vat

£4.80 inc vat
WASHER FOR ENGINE OIL PRIMING PLUG
6K464

WASHER FOR THE OIL PRIMING HOLE PLUG WHEN APPLICABLE 850/997/998 and also on earlier type oil pressure switch or oil pressure union CAM6431.

£0.60 exc vat

£0.72 inc vat
CRANK THRUST WASHER SET STANDARD 1275
ACL2136

SET OF STANDARD SIZE 1275 CRANK THRUST WASHERS

£11.25 exc vat

£13.50 inc vat
CAMSHAFT 1275-1380 A plus
EVOLUTION002

Genuine Mini Spares camshaft for use with 1.5 rockers if preferred--below 5000rpm should produce more power than the 286 profile. Close to MDM274



Cam Timing

107 degrees at full lift on No1 inlet

SEAT...

£82.50 exc vat

£99.00 inc vat
CLASSIC CASTROL 20W/50 1 LITRE TOP UP TIN
CASTROL01

Classic Castrol 20W/50 oil supplied in retro style 1 litre metal tin.

£6.38 exc vat

£7.66 inc vat
PISTON SINGLE 998 FLAT TOP PLUS 60
P22463-60

These have been specially manufactured for Minispares.

Sold individually with rings and pin complete

these are the preferred pistons of many racers in the 998 class

Ringsets are available as R43240-60

£40.00 exc vat

£48.00 inc vat