TACHOMETER GAUGE SMITHS 0-80 80MM
SIB120

£141.59 exc vat

£169.91 inc vat

In stockIn stock
If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smith's"! Available in either 8,000 (RVC10...

£141.59 exc vat

£169.91 inc vat

In stockIn stock

Recommended usage 1 x SIB120 to fit one mini.

Recommended products

tach pod in black for all the 80mm size tachoc-for chrome see SIB801

chrome pod for housing any of the popular size 80mm tachometers from either Smiths or Tim gauges.

Alternative products

If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smith's"! Available in either 8,000 (RVC10...

People also bought products

This original type Smiths tacho will fit positive or negative earth cars if the manufacturers part number has a CA suffix.

This original type Smiths tacho will fit negative earth cars only. 0-10x100

If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smith's"! Available in either 8,000 (RVC10...

Combined water temperature and oil pressure gauge.



Water temprature includes calipllary tube and adaptor to fit into the cylinder head, oil pressure gauge doesn't include the capillary fittings. Not for MPI minis.

This unit fits directly on to the gearbox in place of the standard cable and produces a digital signal for use with any electronic speedometer requiring 12 or 5 volt square wave pulse such as our electronic speedo 13H4443. For pre 1980 s...

Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:



*Trip and total miles

*Remote trip reset

*Driv...

Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:



*Trip and total miles

*Remote trip reset

*Driv...

This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).

Electrical oil temperature gauge including sender. Sender is 1/8NPT fitting, comes with a variety of adaptors but you will need HPS8 a 5/8 UNF male to 1/8NPT adaptor and 2 AED172 if fitting to the sump.

Sealing washer for the oil gauge to oil pipe as sold in OL kit and for 21A804 metal pipe to oil gauge.

Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge...

Complete binnacle set for centre speedo cars, kit includes 200 kph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge cl...

Complete binnacle set for centre speedo cars, kit includes 130 mph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge c...

90mph black speedo clock for 3.4 final drive 10" wheels centre clock type.

We can get these available to order but most customers buy the 13H4442 which is the same but with 130mph face.

Voltage stabiliser for clubman/2-3 clock side pod(smiths) up to 1988. Three terminals/br1303/20.

KPH for overseas customers but many use 13H4444 which reads 200kph

With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...

We sell about 20 of these per year and many are used on similar models to those indicated-Main and dash loom only--No side wing indicators-indicator stalk on right-alternator-rear lamps with reverse lights-steering lock-inertia starter-centre speedo ...

Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.

Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.

Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.