REAR EXHAUST HANGER BRACKET ON REAR SUBFRAME

This is the rear bracket welded to the rear subframe for the later rubber strap mounted exhasts from late 1991 on use

£6.30 exc vat

£7.56 inc vat

EXHAUST RUBBER MOUNTING FROM 1990 ON

2 reqd but sold seperately-From 1990 rover started fitting the hanging rubber exhaust mounting straps which push onto rods on the exhaust and rear subframe similar to the old metro. These were used right to the end of production on minis.

£3.00 exc vat

£3.60 inc vat

INJECTION MANIFOLD DOWNPIPE STUD

TD108051A

Special length and thread pattern only for the exhaust manifold to downpipe of injection cars, see also FX108047 special nuts. Metric M8.

£2.56 exc vat

£3.07 inc vat

EXHAUST REAR BRACKET FOR GEX177 ETC

GEX7084

The very rear hanger for mini saloon exhausts pre 1990.

This bracket slides on after the rear silencer and hangs straight up to the cotton reel mounting but never comes on a new exhaust. It is always prone to breaking if the engine rocks bad...

£1.45 exc vat

£1.74 inc vat

EXHAUST HANGER CENTRE S AND RC40 (MIDDLE)

GEX7248

This is the hanger on the front of the rear subframe for all Coopers and cars with an RC40 exhaust system. The u bolt to fix this to the exhaust is GEX9008.

All the parts to hang RC40 exhausts systems are available ...

£1.74 exc vat

£2.09 inc vat

EXHAUST CENTRE STRAP VAN & ESTATE

GEX7273

centre bracket-longer than the saloon bracket for extra clearance on the longer wheel base varieties of vans and estates --this is the bracket that hangs from the front of the rear subframe mounting---saloon uses GEX7082

£1.44 exc vat

£1.73 inc vat

EXHAUST FITTING KIT FOR PRE 90 MINIS WITH CAST EX/...

GEX9551

Exhaust mounting kit includes the 2 hanging brackets and 2 rubber mountings, new improved cast manifold clamp and fixing nut/bolts for installing an original standard 850/998cc saloon exhaust. To mount an RC40 exhaust system see RC40FK.

£14.25 exc vat

£17.10 inc vat

GASKET FOR EXHAUST CATALYTIC CONVERTER

GEX7761

Metal gasket for the catalyst and is the same both ends for Cooper 1275CC RSP early cars, but only fitted on the front to later cars. If you cannot fit this gasket on the rear your car does not need one.

£0.67 exc vat

£0.80 inc vat

EXHAUST U BOLT CLAMP 2 1/8" 54mm

GEX9010

£0.88 exc vat

£1.06 inc vat

EXHAUST U BOLT CLAMP 1" 3/4" 45mm

GEX9007

Exhaust hanger clamp for 1.75" pipe as per RC40 etc.

£0.67 exc vat

£0.80 inc vat

EXHAUST HANGER BRACKET ON FRONT OF REAR SUBFRAME

C-ARA670

these bolt onbrackets were made to fit on the rear subframe when fitting the later type rubber hanging strap exhausts. this one fits on the front of the rear subframe.

cars from about 1991 on had these brackets welded in position

£12.96 exc vat

£15.55 inc vat

RC40 EXHAUST FITTING KIT

RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

£6.85 exc vat

£8.22 inc vat

FRONT EXHAUST HANGER BRACKET ON REAR SUBFRAME

KHU10011

This is the front bracket welded to the rear subframe to hold the rubber exhaust straps that cars from 1991 had as standard

£6.30 exc vat

£7.56 inc vat

CLIP TO FRONT PIPE

GEX7053

Clamp on the front downpipe that fits to the bracket on the gearbox (GEX7526)

these are also supplied on our new 2 piece exhaust.

£2.05 exc vat

£2.46 inc vat

DOWNPIPE TO GEARBOX EXHAUST BRACKET

GEX7526

This bracket bolts on the gearbox and attaches to the exhaust front downpipe clip GEX7053.

£11.00 exc vat

£13.20 inc vat

EXHAUST U BOLT CLAMP 2" 50mm

GEX9006

£0.74 exc vat

£0.89 inc vat

EXHAUST U BOLT CLAMP 1" 7/8" 48mm

GEX9008

Exhaust hanger clamp for 1.875" pipe.

For joining rear box to downpipe on RC40 and downpipe to manifold on RC40.

£0.73 exc vat

£0.88 inc vat

EXHAUST MOUNTING COMPETITION REAR EXHAUST

C-19G3258

Larger, stronger rear exhaust mounting as used by works cars will usually fit earlier subframes on existing holes in either the middle or side exit position.

£3.25 exc vat

£3.90 inc vat

EXHAUST MIDDLE POLY EXHAUST MOUNTING

GEX7081POLY

Mounting in poly for the exhaust on the front section of the rear subframe. Now orange in colour.

£7.13 exc vat

£8.56 inc vat

MANIFOLD CLAMP 1.5" LCB TO ENGINE FLAT TYPE

C-AHT94

This is the clamp for the C-AEG365 manifold that clamps it to the engine for extra support.

£4.80 exc vat

£5.76 inc vat