Screw for the grille. 8 required. Number 8 also for door lock control assembly. Sold singly,8 maximum used
The original type pk screws for the original 2 piece rad cowlings pre 1974.
6 required
This is a special metric size bolt for holding the original Metro type 4 pot caliper to the hub but with UNF thread to fit the mini swivel hub. This special bolt stops any movement of the hub under braking that was encountered by the standard caliper...
Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.
Engine mounting to subframe bolt (2 per mounting). Some customers find longer bolt GFK5185 easier to use (1"long).
These special studs attach the wood of the Mini Woody Traveller to the body. 18 Required.
thread is 16mm long
There are two of these bolts on hydrolastic front subframe towers to fix in place to the bulkhead. Fit dry suspension pre 1976 see 21A90. This bolt also holds the lower radiator bracket to the alloy casting on the gearbox when a 2 piece ...
Bolt for the bottom of the inner steering column to lock it onto the steering rack spline. This is a Rover special fitting bolt with a 1/2" plain shank to fit the inner steering column groove.
As it is an expensive bolt, for any other purpos...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.