LONG BRASS MANIFOLD NUT

51K1177

($1.10) £1.10 exc vat

($1.32) £1.32 inc vat

In stock

Special extra long nuts were used on some manifolds. These nuts are about an inch long for easy reach and made of brass so they'll never corrode. Especially handy on the inner two studs on dual carb set-ups.

Sold singly and usually 2 used f...

($1.10) £1.10 exc vat

($1.32) £1.32 inc vat

In stock

Recommended usage 2 x 51K1177 to fit one mini.

Inlet & Exhaust Manifolds - Qty 2

Inlet and Exhaust manifolds except Injection - Qty 2

People also bought products

ROCKER ADJUSTING NUT EN24T

C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

($2.64) £2.64 exc vat

($3.17) £3.17 inc vat

HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS

C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat

ARP 11 STUD HEAD SET

C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat

8 PORT HEAD STUD AND NUT SET (STUDS EN24 CHROME MO...

C-AHT282

EN24 Nickel Chrome moly steel studs,Competition head stud kit.

torque to 45ftlbs -no need to re-torque cometic type head gaskets.

For use on the 2012 onwards heads only.

($58.76) £58.76 exc vat

($70.51) £70.51 inc vat

CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990

MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat

MANIFOLD STAINLESS STEEL STUD AND NUT KIT

C-STR282

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

($21.41) £21.41 exc vat

($25.69) £25.69 inc vat

THERMOSTAT HOUSING STAINLESS STEEL STUD AND NUT KI...

C-STR281

Minispares own stainless steel Thermostat housing stud kit for the single tier type thermostat housing.Quantity required one kit per car

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat

THERMOSTAT HOUSING FITTING KIT (SINGLE TIER TYPE)

12G103FK

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

($3.35) £3.35 exc vat

($4.02) £4.02 inc vat

CYLINDER HEAD BOLT COOPER S

AEG248

A true Cooper S engine has 10 studs and one specially designed bolt.

($11.17) £11.17 exc vat

($13.40) £13.40 inc vat

STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")

CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat

STAINLESS STEEL HEATER TAP STUD SET

C-STR285

replacements in stainless steel for the heater tap elbow on the cylinder head.

Quantity required one kit per car

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat

ROCKER COVER CHROME FITTING NUT / ERA BUMP STOP NU...

GM038P

Chrome Rocker bolt with UNF thread. Original Rocker cover bolts are dull zinc coated or painted but the chrome type look much better and cheaper.

A longer threaded version CAM6823 was used on prestige Minifin alloy type A series...

($4.20) £4.20 exc vat

($5.04) £5.04 inc vat

BLANKING PLUG INLET MANIFOLD & CYL HEAD

ADP210

This 5/8unf steel hexagonal head blanking plug was made for the inlet manifolds where the servo union can be fitted, plus blanking off the thermal transmitter hole under the thermostat. Uses 1B3664 washer ----------please note this will ...

($3.57) £3.57 exc vat

($4.28) £4.28 inc vat

CHROME FIXINGS FOR ROCKER COVER

SAC71L

A simple way to dress up that engine compartment while at the same time insuring all the proper hardware is in place. A kit includes 2 each of British made chrome sleeve nuts, spacers and special cup washers, Fits all A & B series engines.

F...

($13.49) £13.49 exc vat

($16.19) £16.19 inc vat

ROCKER COVER BLUE T BAR KIT

SAC71BLUE

Anodised in blue for that different look.

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

ROCKER COVER T BARS(PAIR)

SAC71

Originally marketed by minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment they were improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. These T b...

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat

ROCKER ADJUSTING NUT 1/2" AF NUT SIZE

NT605061

The larger 5/16 unf size rocker screw as used on all forged, sintered and later pressed steel versions that use AEG167 screw in EN8 with heat treated ends. 1/2" wide AF spanner size head nut to fit AEG167

See [link]...

($0.26) £0.26 exc vat

($0.31) £0.31 inc vat

ROCKER COVER T BARS WITH CHROME FITTINGS

SAC71C

Originally marketed by Minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment. These have been improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. Ki...

($14.06) £14.06 exc vat

($16.87) £16.87 inc vat

ROCKER COVER T BARS RED KIT