OIL PRESSURE RELIEF VALVE STANDARD SPRING
6K853

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat

In stockIn stock
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will probably be stuck, requiring encouragement to come out. Briefly cranking the engine over will usually free the plunger; in severe cases a thread tap can be screwed in to grip the plunger from the inside to draw it out. Now throw away the aluminum plunger and replace it with a steel ball (BLS916). The harder ball will never become galled or pitted and therefore won't get stuck. This spring (6K853) and ball assembly should give you a steady 75 PSI @ high RPM. To prevent oil leaks, it is always a good idea to replace the copper washer (6K431) under the domed nut.

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat

In stockIn stock

Recommended usage 1 x 6K853 to fit one mini.
Oil Pump / Pressure Valve, Dipsticks - Qty 1
Oil Pumps, Filters and Coolers - Qty 1

Recommended products
OIL PRESSURE RELIEF VALVE CUP
12H865

The cap that sits on the end of the oil pressure release spring which should be lightly ground in to get proper seating. Cooper S engines had the shorter stronger spring AEA536 and the rest had 6K853 but most fit the

($2.80) £2.80 exc vat

($3.36) £3.36 inc vat
Alternative products
OIL PRESSSURE VALVE AND SPRING
6K853KIT

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat
OIL PRESSURE RELEASE BALL AND SPRING
AEA536KIT

Oil pressure relief valve ball and spring kit. Cooper S upto 1971. Can be retro fitted to all minis to boost oil pressure.

($1.55) £1.55 exc vat

($1.86) £1.86 inc vat
Kit products
OIL PRESSSURE VALVE AND SPRING
6K853KIT

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat
People also bought products
OIL PRESSURE RELEASE VALVE COPPER WASHER
6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($0.36) £0.36 exc vat

($0.43) £0.43 inc vat
OIL PRESSURE RELIEF BALL COOPER S TYPE
BLS916

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat
OIL PRESSURE RELIEF VALVE SEATING
2A797

The seating in the block that the 12H865 oil pressure release valve sits in, when fitting the end with the slight taper goes into the block first.

Tapped M8 to make removal from the block easy. We recommend that you leave the ol...

($10.40) £10.40 exc vat

($12.48) £12.48 inc vat
OIL PRESSURE SPRING CAP NUT
12A1851

The oil pressure relief valve cap on the front of A series.

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
OIL PRESSURE RELEASE BALL AND SPRING
AEA536KIT

Oil pressure relief valve ball and spring kit. Cooper S upto 1971. Can be retro fitted to all minis to boost oil pressure.

($1.55) £1.55 exc vat

($1.86) £1.86 inc vat
OIL PRESSSURE VALVE AND SPRING
6K853KIT

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat
OIL PRESSURE SPRING ORIGINAL COOPER "S"
AEA536

Oil pressure relief valve spring for Cooper S 1961 to 1971.

($1.05) £1.05 exc vat

($1.26) £1.26 inc vat
GEARBOX TO BLOCK STEPPED WASHER FOR CORNER BOLT
22A1150

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
GEARBOX TO BLOCK LOCATING DOWEL (HOLLOW)
12H1824

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat
CRANK THRUST WASHER SET STANDARD 998
ACL2122

Set of standard size 998 thrust washers.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat
ACL SMALL BORE ENGINE CAM LINER SET
ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

($16.14) £16.14 exc vat

($19.37) £19.37 inc vat
PUROLATER FILTER BOWL TO HEAD SEAL
12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
CRANK THRUST WASHER SET +0.30" 1275
ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
CRANK THRUST WASHER SET +0.003" 1275
ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
TIMING CHAIN DUPLEX LIMITED STRETCH TYPE
2H4905EVO

Race quality heavy duty double row performance endless timing chain. It is the best chain available and used by top engine builders, also fits MGB/Midget. This chain is for duplex gears that is used by racers as a limited stretch heavy duty version m...

($19.64) £19.64 exc vat

($23.57) £23.57 inc vat
TIMING CHAIN SINGLE ROW SPECIAL QUALITY
3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

($22.05) £22.05 exc vat

($26.46) £26.46 inc vat
7° OFFSET WOODRUFF KEY
WKN7OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat
4° OFFSET WOODRUFF KEY
WKN4OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat