CRANK THRUST WASHER SET 998 3 THOU OVERSIZE
ACL2122-003

($17.25) £17.25 exc vat

($20.70) £20.70 inc vat

In stockIn stock
Crankshaft washers for crankshaft at 3 thou oversize on each one

sold as a set of four for 998 and 1100cc.

($17.25) £17.25 exc vat

($20.70) £20.70 inc vat

In stockIn stock

Recommended usage 1 x ACL2122-003 to fit one mini.

People also bought products
MAINS SET STANDARD 998/1100 upto 1985 with all sid...
AEM3314-00

ACL Main bearings for the crankshaft as preferred by performance engine builders standard size

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin 2%

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat
BIG ENDS STANDARD 998/1100 COOPER S
AEB572-00

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road car.

( Tri-Metal )

Sintered copper lead, lead...

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat
TIMING CHAIN SINGLE ROW SPECIAL QUALITY
3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

($22.05) £22.05 exc vat

($26.46) £26.46 inc vat
WASHER FOR ENGINE OIL PRIMING PLUG
6K464

WASHER FOR THE OIL PRIMING HOLE PLUG WHEN APPLICABLE 850/997/998 and also on earlier type oil pressure switch or oil pressure union CAM6431.

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat
PISTON SET 998 FLAT TOP CIRCLIP TYPE +40 OVERSIZE
ADU3490-40

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...

($152.00) £152.00 exc vat

($182.40) £182.40 inc vat
ENGINE TO GEARBOX NUT AND BOLT KIT
MSSK060

Complete nut, bolt and washer set for engine to gearbox only

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
WATER PUMP FITTING KIT FOR GWP134 AND GWP132
GWP134FK

Complete fixing kit for a water pump, includes replacement silicone bypass hose, clips, superseal gasket, replacement bolts and washers.

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
WASHER FOR BLOCK DRAIN PLUG (53K2853)
6K638

Washer for the drain plug on the rear of the block (53K2853)

($0.53) £0.53 exc vat

($0.64) £0.64 inc vat
OIL PRESSURE RELEASE VALVE COPPER WASHER
6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($0.36) £0.36 exc vat

($0.43) £0.43 inc vat
CRANKSHAFT WOODRUFF KEY
6K836

Woodruff key for the end of the crankshaft to locate the lower timing chain gear and WKN505 is for the camshaft key to hold the larger timing gear.

($4.98) £4.98 exc vat

($5.98) £5.98 inc vat
SLEEVE FOR LOWER ENGINE STEADY ROD
31G1085

The metal sleeve 3/8" internal diameter used on the gearbox lower arm stabiliser rod when fitted. Also in our MSSK and MSSK001.

Sold singly

($1.75) £1.75 exc vat

($2.10) £2.10 inc vat
HEAD STUD BLOCK TO HEAD SHORT 4" UNC 3/8"
CAM151

You require 5 of these high tensile short head studs and they torque to 42lb/ft. See also complete kit which includes these top grade studs C-AHT279. 3/8"unc stud with unf end for head nut and is 4" long. See other long head stud [link]C...

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat
GEARBOX TO ENGINE HALF MOON SEAL
AHU1959

Front main (half moon) black seal for all transverse engines. This is the flexible item as fitted originally after replacing the early red type that leaked.

See [link]CAM6548{/link] for the rigid seal designed by Rover for all their warran...

($2.05) £2.05 exc vat

($2.46) £2.46 inc vat
TIMING CHAIN TENSIONER PAD from eng.no.99h791/10h7...
12G2621

Plastic tensioner pad to take up the slack in single row timing chains on A plus engines that wears and should be replaced nearly every time you have the timing cover off. From engine numbers 99H791/10H791 AND ALL A+. Fitted to 998/1100cc from 1979 a...

($6.72) £6.72 exc vat

($8.06) £8.06 inc vat
CAMSHAFT GEAR LOCKTAB
2A759

If you are replacing your timing chain or just doing routine maintenance a new locktab is sure to come in handy.

($0.52) £0.52 exc vat

($0.62) £0.62 inc vat
PISTON RING SET 998 A PLUS+20
R33636-20

3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.for P20773 pistons

($61.20) £61.20 exc vat

($73.44) £73.44 inc vat
CORE PLUG 1300 & ALL A+ ENGINES
AEC876

Cup type core plug for all A plus and 1275cc engines except for Cooper S. 33.6mm wide.A plus 5 required but only 4 on 998 A plus. 1275 has 2 core plugs oil pump end of block whereas 998 only has one

($0.77) £0.77 exc vat

($0.92) £0.92 inc vat
DISTRIBUTOR CLAMP FOR A PLUS DIZZY 85 ON
TAM1671

Prong type clamp that bolts to the block and retains the A plus distributor in place. The screw is TAM1706.

Pre A plus clamp is 501134

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
OIL PRESSURE RELEASE BALL AND SPRING
AEA536KIT

Oil pressure relief valve ball and spring kit. Cooper S upto 1971. Can be retro fitted to all minis to boost oil pressure.

($1.55) £1.55 exc vat

($1.86) £1.86 inc vat
CRANKSHAFT TIMING GEAR SHIM
6K628

Very important shim to go behind crankshaft timing gear to align both wheels up and get correct alignment/true running of timing chain. Approx 5 thou thick, fit as many shims as required.

($0.51) £0.51 exc vat

($0.61) £0.61 inc vat